Best bang for buck Hardware 2020

What I don’t like about the newest chipsets is that they are often barely usable so much stuff is not working and it takes months or often years to get all hardware components working or even a future proof mainline support.

So sometimes I just prefer older hardware with better or superior software support than a (in theory) better/stronger hardware. It will make a device/chipset also much more “future proof” is mainline support is present.

But what chipset would it be that you will get @bubblegum57

When you invest €20 in a old EOL SoC you will invest next year even more. SoC starting from G12* is fully supported. And when invest that less in a unknown chinese cheap device you also will invest it double or more.

All talking about this is already more than €20.

You would not accept any recommended hardware anyway as you will need to spend more than €20.

Like invest multiple times in cheap devices with a lot of troubles or invest in one device and have fun for the next years.

Actually I’m here to get recommendations - that’s why I posted this thread :wink:

I think both is possible. I invested in a cheap raspberry pi 3 almost 5 years ago and it’s still running and working fine.

Pretty much anything from th past few years will blow the Pi3 out of the water.

€20 is a very meagre price though, so will limit things quite a lot.

I still use an S912 as a secondary box and it works quite well and iff the M8S Plus L meets your needs then go for it.

But I would look at fleabay and spend a little extra to get an S905X3, which is now quite well supported and off course, up to date, meaning that support will continue for much longer than the S912 will.

If you up your budget to €30-€35 then the possibilities will open far more widely.

And black friday is around the corner, so many a bargain to be had then too.

1 Like

Thank’s @Compent! That was very useful information :100: you left here for me. After these empty answers from @vpeter and @bubblegum57 I wasn’t sure if there will people here willing to help or just continue to spam… you proofed me wrong luckily :+1:

That sounds good. My needs are actually quite easy to meet. The raspberry pi 3 still does it’s job. Most annoying thing is just the sometimes slow kodi interface for me.

What is your opinion about 2gigs of ram VS. 4gig? From reading around the world wide web and this forum it looks like to me there is no real advantage using 4gig for a *elec only setup - it will just never be utilized by the system. Is this true?

1 Like

This was a good tip. I have a x96 max+ with 2/16g for 23€ just under my finger… just waiting for @Compent that 2gigs of ram is “future proof” :stuck_out_tongue:

I recently purchased a X96 max plus. with x905x3. I still have S912, I have a Mecool M8S with a non working wifi. I still have a Beelink s905,
I also have a Amazon fire tv 4k & a nvidia shield.
You ask what I would buy, I just bought a DS920+ I don’t need anything at the moment.

For video playback, 2Gb is enough.

If streaming, then Ethernet or WiFi speed are more relevant.

If you are gaming and doing things that benefit from more RAM, then 4Gb is going to be of benefit and it is often not that much more expensive to get a model with more RAM.

1 Like

Please don’t do this. People were trying to help you out. With that budget it’s a lottery to buy a device. It can work ok, be half decent or a piece of trash. Just referring S912 as a good deal shows that your research was superficial, to say the least. Unfortunately, the S912 is the forgotten chip from amlogic. It’s the most likely to be unsupported or poorly supported in the next generation of kodi (and CoreELEC).
With a bit more money you can buy a S905X3 that’s more future proof and 5 minutes searching the forum you’ll find them.

1 Like

I did already :wink:

Not really sure about that… How does it help to know the cost of my TV?

I went for a x96 max+ (s905x3 based) as suggested by @rednas74 and went for the edition with 2GB ram after @Compent was so nice to explain me the “real” benefit for my use case.

23€ spent… let’s see what a half working ok-ish piece of trash I get :wink:

Any way thank’s for trying to help…

Main problem with 2GB models is they’re often limited to 100Mbit rather than Gigabit ethernet, which looks to be the case with the X96 MAX Plus.

No problem for me because I don’t have ethernet available on the spot I’m going to use it. The 2.4ghz wifi (3 meters away ~300Mbit) will be sufficient in any way (as it is with the raspberry pi 3 at the moment). I’m also living happy without bluetooth mouse and keyboard :genie:

Stay on raspi 3 if You don´t want to spend money

My TV was about 2000€ cheaper (actually it was free) than yours, my AVR was about 700€ cheaper and my loudspeakers around 3000€ cheaper than yours… Why I’m not allowed to spend 83€ less for my CE device than you?

Actually I spend the 23€ for it already :no_mouth:

Do You remember:

07/22/2020
2GB ought to be enough for anyone running CE

In any way, thank’s for your spam @Tim_Taylor

You are very impolite.
Wish You all the best and keep savin money

1 Like

As a new member with that attitude and the way you’re talking to/about well respected members of this community who were just trying to help, you will find yourself out of this forum rather quickly, consider this your first and final warning.

3 Likes

“In any way, thank’s for your spam @Tim_Taylor

This is a HELP forum, and your kind of communication is not welcomed here.
Use your Social Media Websites to release your frustrations, not HERE.

I think all is said, closed

2 Likes