My box is Transpeed X3 Plus S905x3 2GB 16GB and i only want install coreelec to internal eMMC.
I don’t care aboud android and tried ceemmc tool with dual boot mode installation and single boot mode installation but not luck.
There is NO official support by Team CoreELEC
if you continue to run this tool!
Continue? [y]: y
eMMC size: 0x0003ab400000 [16GB]
Existing CoreELEC dual boot installation found on eMMC
Migrate CoreELEC dual boot to single boot installation
Use CoreELEC data from
[1] current used SD or USB device
[2] the existing data on eMMC
[3] existing backup on current used SD or USB device
Renew current CoreELEC dual boot installation on eMMC
Use CoreELEC data from
[4] current used SD or USB device
[5] existing backup on current used SD or USB device
[6] Make a backup of current CoreELEC dual boot installation on eMMC to current used SD or USB device
[7] Remove current CoreELEC dual boot installation on eMMC
Please choose one option? [1/2/3/4/5/6/7]: 1
Free space of ‘partition CE_FLASH’: 512MB
Warning: Could not find ‘dto’ partition!
Free space of ‘partition CE_STORAGE’: 14416MB
Used space of ‘/flash’: 211MB
Used space of ‘/storage’: 33MB
There is enough free space on eMMC for installation!
Continue? [y]: y
Error: inflate() returned -3
Failed to decompress gzipped dtb: -1!
Could not remove node ‘/partitions’ from dtb0!
Failed to write the new partition table to eMMC!
CoreELEC (official): 9.2.2 (Amlogic-ng.arm)
CoreELEC:~ # dd if=/dev/reserved of=/storage/backup/reserved.img
dd: can’t open ‘/dev/reserved’: No such file or directory
CoreELEC:~ # reboot
CoreELEC:~ # dd if=/dev/reserved of=/storage/backup/reserved.img
131072+0 records in
131072+0 records out
67108864 bytes (64.0MB) copied, 2.221683 seconds, 28.8MB/s reserved.img.zip (716.6 KB)
CoreELEC (official): 9.2.2 (Amlogic-ng.arm)
CoreELEC:~ # ceemmc -vx
Starting CoreELEC eMMC installation tool...
System is not supported: sm1_s905x3_2g!
There is NO official support by Team CoreELEC
if you continue to run this tool!
Continue? [y]: y
eMMC size: 0x0003ab400000 [16GB]
Original partition table:
[mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000 [4 MB], unkn
[mmcblk0p02] env offset 0x000000400000, size 0x000000800000 [8 MB], unkn
[mmcblk0p03] misc offset 0x000000c00000, size 0x000000800000 [8 MB], code
[mmcblk0p04] logo offset 0x000001400000, size 0x000000800000 [8 MB], code
[mmcblk0p05] dtbo offset 0x000001c00000, size 0x000000800000 [8 MB], code
[mmcblk0p06] reserved offset 0x000002400000, size 0x000004000000 [64 MB], unkn
[mmcblk0p07] CE_FLASH offset 0x000006400000, size 0x000020000000 [512 MB], data
[mmcblk0p08] CE_STORAGE offset 0x000026400000, size 0x000385000000 [14416 MB], data
Existing CoreELEC installation found on eMMC
[1] Make a copy of current CoreELEC installation on eMMC to current used SD or USB device
Please choose one option? [1]: