How to configure IR remote control

IR remote controls can be configured in 1 of 2 ways in CoreELEC, both are detailed in this guide below.

meson-ir
meson-ir allows you to use almost any IR remote controller to control your device.

CoreELEC uses meson-ir by default and our builds come with a limited selection of IR remote configurations for devices built in.

If your remote does not work then you will need to follow the below instructions to create a config and get it working.

Firstly you must SSH into your device and then Kodi and eventlircd services must be stopped.

systemctl stop kodi
systemctl stop eventlircd

Next you need to run ir-keytable to scan for remote codes.

ir-keytable -p NEC,RC-5,RC-6,JVC,SONY -t

Start to press all of the buttons on your remote and make a note of each scan code in notepad on your computer.

Now you need to create your configuration, an example can be seen here. Don’t delete 1st line, only name and protocol could be modified in it. A list of functions can be found here.

When you have created your map file it needs to be saved in the following location.

/storage/.config/rc_keymaps/YOURMAPNAME

You must also create the following file /storage/.config/rc_maps.cfg with the following contents.

meson-ir * YOURMAPNAME

Now you must load your config and start Kodi and eventlircd back up to test your changes.

ir-keytable -a /storage/.config/rc_maps.cfg -s rc0
systemctl start eventlircd
systemctl start kodi

If your config works and you are happy with it then you are not required to do anything further and it will be loaded automatically when rebooting/powering on your device.

Pre-made remote control configurations can be found here.

amremote
Many of you will be most familiar with this method, amremote typically gives a much better user experience with the bundled remotes with generic devices.

To use an amremote configuration simply copy your remote.conf file to either the root folder of your SD card / USB flash drive or to /storage/.config/remote.conf.

NOTE: after the first time you boot your device with an amremote configuration it will automatically reboot whilst modifications are made to your dtb to enable amremote.

You can change back to meson-ir at any time by simply removing the remote.conf file and rebooting.

11 Likes
How to find code of a key to update remote.conf
IR controller doesn't work after configuration
(S912) H96 Pro+ Black Board - Trouble Remote Power ON
Amlogic S905X3, S905Y3, S905D3 thread
Help installing CoreELEC 9.2.2 on T95Z Plus (Amlogic S912)
Minix Neo U1 device tree - remote control
Tanix TX9S
Help with the remote.conf
How to manipulate remote files?
CoreELEC 8.99.2
Change remote keymap
Logitech Harmony 650 responsiveness problem
Problem delay remote controller KIpro s905x
NEW Repo for Remote files (Thanks to Betatester)
CoreELEC 8.95.0 release
Error "Error in mount_storage: " after first start
8.90.5 - Mini M8S II - remote controller doesn't work
Remote controller not working with crazycat drivers
OTT TV-BOX T95M -> Which DTB for VFD Use / Remote Control
CEC stop working correctly After .3 update
Android box h96 pro plus does not work on the remote control
Tvheadend htsp client no signal message
A95X -R1 / S905W issue
Notice on updating from LibreELEC builds
Update to 8.90.2 Tanix TX3 Mini
Ir_keytable only working for button working
Whats the scheme for remotes on 8.90.2
NEW Repo for Remote files (Thanks to Betatester)
How to execute a linux command by pressing a remote key?
T95x2 remote config trouble (s905x2)
Power on/off with minix neo a2 remote with odroid N2
Support added for S905X2, S922X and A311D!
Denon and Panasonic Non-supported remotes
CoreElec freezes on welcome screen
Xbox Media Remote
Remote control X96 mini
Device tree gxbb_p200_2G_1Gbit failure on Leia Final
[S922X] Bee-link GT King
[S905X3] X96Air_P2/P3 4/32GB 1Gbit Lan (How to config)
X96 Max - LCD & Remote
Nexbox A95X (1gb) power-on from IR remote?
Coreelec does not boot in X96 mini
Config for enabling Minix A2 poweroff stops working after reboot
X96 (S905X), power on by IR remote not working
[Solved] VIM3L problem with ir remote on CoreELEC 9.2.2
[S922X] X88 King
Keymap.xml and meson-ir
Is the MCE usb receiver supported?
NEW Repo for Remote files (Thanks to Betatester)
NEW Repo for Remote files (Thanks to Betatester)
Updating M8S PRO+ S905X or not - beginner questions
(solved) After update to 8.95.6 Media Center Extention (Logitech Harmony) don't work
Trivial Button Issue Mapping
Nightly builds
ABOX A1 Max 2GB
Help to power on with Odroid-N2
Support added for S905X2, S922X and A311D!
CoreElec freezes on welcome screen
CoreELEC 9.0.0
Wetek Pro remote
[S905X2] Setup a Ugoos X2 Cube with CoreELEC 9.2.2? Power on by USB keyboard?
[S922X] X88 King
[S922X] X88 King
Sunvell T95X: Stuck at Setup Wizard
Sunvell T95X: Stuck at Setup Wizard
What remote is enabled by default in rc_maps.cfg
TX5 PRO remote configuration differences between Coreelec releases
Minix U1 supplied remote stopped working in 8.95.5

About | FAQ | Terms of Service | Privacy Policy | Legal Notice