Is anyone able to help me with my USB problem posted above? I’m still having this problem, and I can’t figure out if it is an issue with my Odroid hardware, or if I’m missing something software-wise.
Hi, I activatet the debug log and changed the device from apa102 to ws2801 and back.
Debug log:
[hyperiond EFFECTFILES] (INFO) 37 effects loaded from directory :/effects/
[hyperiond EFFECTFILES] (INFO) 20 effect schemas loaded from directory :/effects/schema/
[hyperiond EFFECTFILES] (INFO) 0 effects loaded from directory /storage/.kodi/userdata/addon_data/service.hyperion.ng/custom-effects
[hyperiond SettingsManager] (DEBUG) (SettingsManager.cpp:101:SettingsManager()) Settings database initialized
[hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:65:handleSettingsUpdate()) Set mode to: default
[hyperiond ComponentRegister] (DEBUG) (ComponentRegister.cpp:67:componentStateChanged()) Blackborder detector: enabled
[hyperiond DAEMON] (INFO) set screen capture device to ‘amlogic’
[hyperiond AMLOGICGRABBER] (DEBUG) (Grabber.cpp:33:setVideoMode()) Set videomode to 0
[hyperiond FRAMEBUFFERGRABBER] (DEBUG) (Grabber.cpp:33:setVideoMode()) Set videomode to 0
[hyperiond FRAMEBUFFERGRABBER] (INFO) Display opened with resolution: 1920x1080@32bit
[hyperiond AMLOGICGRABBER] (DEBUG) (AmlogicGrabber.cpp:31:AmlogicGrabber()) constructed(160 x 160), grabber device: /dev/amvideocap0
[hyperiond DAEMON] (INFO) AMLOGIC grabber created
[hyperiond V4L2:auto] (DEBUG) (Grabber.cpp:33:setVideoMode()) Set videomode to 0
[hyperiond V4L2:auto] (INFO) Signal threshold set to: {12, 12, 12}
[hyperiond V4L2:auto] (INFO) Signal detection is now disabled
[hyperiond V4L2:auto] (INFO) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
[hyperiond DAEMON] (DEBUG) (hyperiond.cpp:440:handleSettingsUpdate()) V4L2 grabber created
[hyperiond JSONSERVER] (DEBUG) (JsonServer.cpp:25:JsonServer()) Created instance
[hyperiond JSONSERVER] (INFO) Started on port 19444
[hyperiond ComponentRegister] (DEBUG) (ComponentRegister.cpp:67:componentStateChanged()) LED device: enabled
[hyperiond LEDDEVICE] (INFO) LedDevice ‘apa102’ configured.
[hyperiond LEDDEVICE] (DEBUG) (ProviderSpi.cpp:48:open()) _baudRate_Hz 1000000, _latchTime_ns 1
[hyperiond LEDDEVICE] (DEBUG) (ProviderSpi.cpp:49:open()) _spiDataInvert 0, _spiMode 0
[hyperiond ComponentRegister] (DEBUG) (ComponentRegister.cpp:67:componentStateChanged()) Smoothing: enabled
[hyperiond FLATBUFCONNECTION] (INFO) Connecting to Hyperion: 127.0.0.1:19401
[hyperiond EFFECTENGINE] (INFO) run effect Rainbow swirl fast on channel 0
[hyperiond FLATBUFSERVER] (INFO) Started on port 19400
[hyperiond PROTOSERVER] (INFO) Started on port 19445
[hyperiond AMLOGICGRABBER] (INFO) FB mode
[hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:105:handleSettingsUpdate()) Set document root to: :/webconfig
[hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:105:handleSettingsUpdate()) Set document root to: :/webconfig
[hyperiond WEBSERVER] (INFO) Started on port 8090 name ‘Hyperion Webserver’
[hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:153:registerInput()) Register new input ‘System/EFFECT’ with priority 0 as inactive
[hyperiond HYPERION] (INFO) Initial foreground effect ‘Rainbow swirl fast’ started
[hyperiond EFFECTENGINE] (INFO) run effect Warm mood blobs on channel 254
[hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:153:registerInput()) Register new input ‘System/EFFECT’ with priority 254 as inactive
[hyperiond HYPERION] (INFO) Inital background effect ‘Warm mood blobs’ started
[hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:153:registerInput()) Register new input ‘System/GRABBER’ with priority 250 as inactive
[hyperiond ComponentRegister] (DEBUG) (ComponentRegister.cpp:67:componentStateChanged()) Framegrabber: enabled
[hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created
[hyperiond HYPERION] (INFO) Hyperion instance ‘First LED Hardware instance’ has been started
[hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:233:setInputImage()) Priority 250 is now active
[hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:333:setCurrentTime()) Set visible priority to 0
[hyperiond LEDDEVICE] (ERROR) SPI failed to write. errno: 14, Bad address
[hyperiond LEDDEVICE] (ERROR) Previous line repeats 1 times
[hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:171:handleSettingsUpdate()) Setup SSL certificate
[hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:187:handleSettingsUpdate()) Setup private SSL key
[hyperiond WEBSERVER] (INFO) Started on port 8092 name ‘Hyperion Webserver’
[hyperiond LEDDEVICE] (ERROR) SPI failed to write. errno: 14, Bad address
[hyperiond LEDDEVICE] (ERROR) Previous line repeats 12 times
[hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:193:setInput()) Priority 254 is now active
[hyperiond LEDDEVICE] (ERROR) SPI failed to write. errno: 14, Bad address
[hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:233:setInputImage()) Priority 0 is now active
[hyperiond LEDDEVICE] (ERROR) SPI failed to write. errno: 14, Bad address
[hyperiond LEDDEVICE] (ERROR) Previous line repeats 18 times
[hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.178.50
[hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:107:handleInstanceSwitch()) Client ‘::ffff:192.168.178.50’ switch to Hyperion instance 0
[hyperiond LEDDEVICE] (ERROR) SPI failed to write. errno: 14, Bad address
[hyperiond LEDDEVICE] (ERROR) Previous line repeats 43 times
[hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:293:setCurrentTime()) Timeout clear for priority 0
[hyperiond LEDDEVICE] (ERROR) SPI failed to write. errno: 14, Bad address
[hyperiond LEDDEVICE] (ERROR) Previous line repeats 5 times
[hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:333:setCurrentTime()) Set visible priority to 250
[hyperiond LEDDEVICE] (ERROR) SPI failed to write. errno: 14, Bad address
[hyperiond LEDDEVICE] (ERROR) Previous line repeats 104 times
[hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:204:sendClose()) send close: 1000
[hyperiond LEDDEVICE] (ERROR) SPI failed to write. errno: 14, Bad address
[hyperiond LEDDEVICE] (ERROR) Previous line repeats 108 times
[hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.178.50
[hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:107:handleInstanceSwitch()) Client ‘::ffff:192.168.178.50’ switch to Hyperion instance 0
[hyperiond LEDDEVICE] (ERROR) SPI failed to write. errno: 14, Bad address
[hyperiond LEDDEVICE] (ERROR) Previous line repeats 137 times
[hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:204:sendClose()) send close: 1000
[hyperiond LEDDEVICE] (ERROR) SPI failed to write. errno: 14, Bad address
[hyperiond LEDDEVICE] (ERROR) Previous line repeats 6 times
[hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.178.50
[hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:107:handleInstanceSwitch()) Client ‘::ffff:192.168.178.50’ switch to Hyperion instance 0
[hyperiond LEDDEVICE] (ERROR) SPI failed to write. errno: 14, Bad address
[hyperiond LEDDEVICE] (ERROR) Previous line repeats 200 times
[hyperiond LEDDEVICE] (ERROR) Previous line repeats 59 times
[hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1114:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.178.50
[hyperiond LEDDEVICE] (ERROR) SPI failed to write. errno: 14, Bad address
[hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1123:handleLoggingCommand()) log streaming deactivated for client ::ffff:192.168.178.50
[hyperiond LEDDEVICE] (ERROR) SPI failed to write. errno: 14, Bad address
[hyperiond LEDDEVICE] (ERROR) Previous line repeats 200 times
[hyperiond LEDDEVICE] (ERROR) Previous line repeats 200 times
[hyperiond LEDDEVICE] (ERROR) Previous line repeats 200 times
[hyperiond LEDDEVICE] (ERROR) Previous line repeats 200 times
[hyperiond LEDDEVICE] (ERROR) Previous line repeats 200 times
[hyperiond LEDDEVICE] (ERROR) Previous line repeats 200 times
[hyperiond LEDDEVICE] (ERROR) Previous line repeats 165 times
[hyperiond LEDDEVICE] (INFO) LedDevice ‘ws2801’ configured.
[hyperiond LEDDEVICE] (DEBUG) (ProviderSpi.cpp:48:open()) _baudRate_Hz 1000000, _latchTime_ns 1
[hyperiond LEDDEVICE] (DEBUG) (ProviderSpi.cpp:49:open()) _spiDataInvert 0, _spiMode 0
[hyperiond LEDDEVICE] (ERROR) SPI failed to write. errno: 14, Bad address
[hyperiond LEDDEVICE] (ERROR) Previous line repeats 132 times
[hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1114:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.178.50
[hyperiond LEDDEVICE] (ERROR) SPI failed to write. errno: 14, Bad address
[hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1123:handleLoggingCommand()) log streaming deactivated for client ::ffff:192.168.178.50
[hyperiond LEDDEVICE] (ERROR) SPI failed to write. errno: 14, Bad address
[hyperiond LEDDEVICE] (ERROR) Previous line repeats 200 times
[hyperiond LEDDEVICE] (ERROR) Previous line repeats 200 times
[hyperiond LEDDEVICE] (ERROR) Previous line repeats 200 times
[hyperiond LEDDEVICE] (ERROR) Previous line repeats 76 times
[hyperiond LEDDEVICE] (INFO) LedDevice ‘apa102’ configured.
[hyperiond LEDDEVICE] (DEBUG) (ProviderSpi.cpp:48:open()) _baudRate_Hz 1000000, _latchTime_ns 1
[hyperiond LEDDEVICE] (DEBUG) (ProviderSpi.cpp:49:open()) _spiDataInvert 0, _spiMode 0
[hyperiond LEDDEVICE] (ERROR) SPI failed to write. errno: 14, Bad address
[hyperiond LEDDEVICE] (ERROR) Previous line repeats 200 times
[hyperiond LEDDEVICE] (ERROR) Previous line repeats 155 times
[hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1114:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.178.50
[hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1114:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.178.50
My plugin just updated to 9.2.104 - could have sworn I had updates for the plugin disabled… My setup is now terminally broken - LED device disables after ~5 seconds. Managed to find a zip for 103 but still the same:
Device disabled, device ‘adalight’ signals error: ‘Timeout writing data to ttyACM0’
Can I download older versions anywhere?
Just make a new config before trying to downgrade?
Tried new config on plugins 104,103, upgraded CE from 9.2.3 > 9.2.4.1, same result for everything: hyperion works for a few secs then LED device goes off. Really just want to go back to a version that works for me if possible.
Looks like you are using SPI for LED control.
Maybe the SPI got deactivated by update, see similar case:
I’m using the Lightberry (Arduino) USB serial > SPI adaptor, given that I’m not using the built in SPI would this still be relevant?
Sorry, wanted to reply to vorohe6910
No, not needed if connection N2-Arduino is USB.
Anybody having this issue on the latest Alpha 7?
https://hyperion-project.org/threads/howto-hyperion-ng-libreelec-inoffiziell-unofficially.10463/page-3 (post 47, I couldn’t hyper link)
Basically controlling Hyperion with anything but the web interface causes this disco light effect? Like documented on the hyperion project forum this is an alpha 7 issue, but downgrading back to Alpha 6 I STILL have this issue? Is there any way to solve this or can I get a link to the older version?
So is there a way to get older versions?
Yes, i am using SPI for LED control. SPI is enabled and works with the odroid test program: https://wiki.odroid.com/odroid-c2/application_note/gpio/spi#tab__odroid-c2
I took a second SD card, installed Ubuntu and compiled Hyperion NG.
I was not able to get the platform capture working but the LED were lightning and effects or colours works as well.
No, because for some reason Portisch didn’t put this on github? At least not that I see? I basically just went here and got the oldest version.
https://relkai.coreelec.org/?dir=addons/9.2/Amlogic/arm/service.hyperion.ng
I have no idea why it’s not on github because I could just easily downgrade my Hyperion install and have this common issue fixed. It really sucks because I’m unable to use my ambilight easily.
DUDE!
I had seen that page, but hadn’t noticed the “switch to archive” link. Pulled down 9.2.101 and BOOM, problem fixed.
Legend, thanks for sending me back to that page.
1 Like
Wheres the switch to archive link? I’d also like to get 9.2.101 haha
Edit: nevermind just found it myself! http://coreelec.relkai.org/?dir=addons/9.2/Amlogic/arm/service.hyperion.ng
Yes, 9.2.101 works for me also! Thank you for your note! 
@Portisch could you create a Coreelec Version from this Fork?
I would love to try the new USB decoding stuff.
No, there are minimum of 165 forks from Hyperion.ng This link you posted isn’t a real fork anyway.
It’s better you learn how to modify the build system to use your preferred fork and compile it by yourself.
Or you ask the creator of the fork if he can give you a compiled build.
In the menu I still have Blue-Red color switched after many years.
Always waiting for a fix but it never comes, so I always revert back to the version.101, and stopped updating a year ago.
Home assistant forced me to update to .104 (2.0.0 alpha 7) and I sadly see this bug is still there.
How come everyone has it right and while playing a video it is perfect, but in the menu the RGB is BGR and 2 colors are switched with my armbox S912.
Also with the latest update (coming from 101) I have random colorful flickers. What can cause it?
Nobody else does have problems with RGB-BRG order. Maybe your hardware do have a different logical electrical connection. But I remember there is a wizard in the web interface of Hyperion where you can exchange the colors. The value will be stored into the Hyperion config and it is still working with newest version.
Others have this too apparently:
And there is a fix for that, and funny enough you updated the addon 