MXQ Pro S905W No WiFi

Help & Support Hardware
1

Hi @omegablue, I have also the MXQ PRO 4K 5G 2GB RAM with S905W, and I have booted success Coreelec from USB (not from SD card), but doesn’t detect WIFI chip. Did you do any trick to get working the WIFI?
Thanks!

2

You’ll need to identify your WiFi chip.

SSH and issue command

Code:
udevadm info /sys/bus/sdio/devices/sdio*

3

Hi! Thanks for your fast response.

This is the output of this command:

CoreELEC:~ # udevadm info /sys/bus/sdio/devices/sdio*
P: /devices/d0070000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:1
L: 0
E: DEVPATH=/devices/d0070000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:1
E: DRIVER=SSV6XXX_SDIO
E: SDIO_CLASS=07
E: SDIO_ID=3030:3030
E: MODALIAS=sdio:c07v3030d3030
E: SUBSYSTEM=sdio

Also, I’ve opened the TV Box and the WIFI chip is SV6256P, any method to get working?

4

I’ve opened a new thread for this topic.

@cdu13a may help you with this driver support.

Please verify which CE version you are using ?

5

I’m using CE 9.2.5 Generic with DTB 281_2G. Thanks again!

6

@kostaman thanks for open new thread!

@cdu13a please, could you help with SV6256P wifi driver on Coreelec/Linux?

Thanks both, appreciate your help!

7

Hi,

Did anyone make any progress with this?
I have a box with the same Wi-Fi chip, the mecool m8s pro w. Also using the same dtb as above.

With the older kernel stable build, Wi-Fi works ok.
But looks like the driver isn’t in the stable NG build, I’ve not yet tried the nightlies to see if it’s been added.

Thanks
Wainy

Edit:

This tells me it’s not looking likely…

8

This topic was automatically closed 91 days after the last reply. New replies are no longer allowed.