[ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.190 (adamg@zulu) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) ) #1 SMP PREEMPT Wed Nov 27 07:28:48 GMT 2019 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] Machine model: Amlogic S905X2 [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] OF: reserved mem: __reserved_mem_alloc_size, start:0x0000000077800000, end:0x0000000078000000, len:8 MiB [ 0.000000@0] Reserved memory: created CMA memory pool at 0x0000000077800000, size 8 MiB [ 0.000000@0] OF: reserved mem: initialized node linux,meson-fb, compatible id shared-dma-pool [ 0.000000@0] Reserved memory: created CMA memory pool at 0x00000000e8800000, size 128 MiB [ 0.000000@0] OF: reserved mem: initialized node linux,ion-dev, compatible id shared-dma-pool [ 0.000000@0] Reserved memory: created CMA memory pool at 0x00000000e6000000, size 40 MiB [ 0.000000@0] OF: reserved mem: initialized node linux,di_cma, compatible id shared-dma-pool [ 0.000000@0] Reserved memory: created DMA memory pool at 0x00000000f0900000, size 0 MiB [ 0.000000@0] OF: reserved mem: initialized node linux,ppmgr, compatible id shared-dma-pool [ 0.000000@0] Reserved memory: created CMA memory pool at 0x00000000d2c00000, size 308 MiB [ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_cma, compatible id shared-dma-pool [ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved [ 0.000000@0] OF: reserved mem: __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] Reserved memory: created CMA memory pool at 0x0000000005000000, size 4 MiB [ 0.000000@0] OF: reserved mem: initialized node linux,secmon, compatible id shared-dma-pool [ 0.000000@0] cma: Reserved 8 MiB at 0x00000000d2400000 [ 0.000000@0] On node 0 totalpages: 985088 [ 0.000000@0] DMA zone: 15392 pages used for memmap [ 0.000000@0] DMA zone: 0 pages reserved [ 0.000000@0] DMA zone: 985088 pages, LIFO batch:31 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 22 pages/cpu s51992 r8192 d29928 u90112 [ 0.000000@0] pcpu-alloc: s51992 r8192 d29928 u90112 alloc=22*4096 [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 969696 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 otg_device=0 reboot_mode_android=normal logo=osd0,loaded,0x3d800000 vout=1080p60hz,enable panel_type=lcd_1 hdmitx=0x2f,444,8bit hdmimode=1080p60hz frac_rate_policy=1 hdmi_read_edid=1 cvbsmode=576cvbs osd_reverse=0 video_reverse=0 irq_check_en=0 androidboot.selinux=permissive androidboot.firstboot=0 jtag=disable androidboot.hardware=amlogic androidboot.serialno=x4p1906000000902 mac=d0:5f:64:d0:1a:ec androidboot.mac=d0:5f:64:d0:1a:ec BOOT_IMAGE=kernel.img boot=LABEL=COREELEC disk=LABEL=STORAGE console=ttyS0,115200 console=tty0 no_console_suspend enable_wol=1 hdmimode=1080p60hz logo=osd0,loaded,0x3d800000 quiet console=tty0 systemd.show_status=auto [ 0.000000@0] fb: osd0 [ 0.000000@0] fb: loaded [ 0.000000@0] fb: 0x3d800000 [ 0.000000@0] lcd: panel_type: lcd_1 [ 0.000000@0] vout: get hdmimode: 1080p60hz [ 0.000000@0] hdmitx: hdmitx boot frac_rate_policy: 1 [ 0.000000@0] vout: get cvbsmode: 576cvbs [ 0.000000@0] vpp_axis_reverse: bootargs is 0 [ 0.000000@0] DI: di_read_canvas_reverse: bootargs is 0. [ 0.000000@0] phlock_phase_config: bootargs is 0. [ 0.000000@0] vout: get hdmimode: 1080p60hz [ 0.000000@0] fb: osd0 [ 0.000000@0] fb: loaded [ 0.000000@0] fb: 0x3d800000 [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000@0] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000@0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000@0] Memory: 3328292K/3940352K available (11516K kernel code, 1648K rwdata, 9188K rodata, 4800K init, 1696K bss, 104156K reserved, 507904K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009bc0000 ( 11520 KB) [ 0.000000@0] .rodata : 0xffffff8009bc0000 - 0xffffff800a4c0000 ( 9216 KB) [ 0.000000@0] .init : 0xffffff800a4c0000 - 0xffffff800a970000 ( 4800 KB) [ 0.000000@0] .data : 0xffffff800a970000 - 0xffffff800ab0c200 ( 1649 KB) [ 0.000000@0] .bss : 0xffffff800ab0c200 - 0xffffff800acb43bc ( 1697 KB) [ 0.000000@0] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00004000 - 0xffffffbf03c24000 ( 60 MB actual) [ 0.000000@0] memory : 0xffffffc000100000 - 0xffffffc0f0900000 ( 3848 MB) [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized [ 0.000000@0] g12a_aoclkc_init: register ao clk ok! [ 0.000000@0] Meson chip version = RevB (28:B - 40:0) [ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk [ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk [ 0.000000@0] meson_g12a_gpu_init: register meson gpu clk [ 0.000000@0] meson_g12a_media_init: register meson media clk [ 0.000000@0] meson_g12a_misc_init: register amlogic g12a misc clks [ 0.000000@0] meson_g12a_misc_init: done. [ 0.000000@0] g12a_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000026@0] meson_bc_timer: mclk->mux_reg =ffffff800800c190,mclk->reg =ffffff800800e194 [ 0.000497@0] Console: colour dummy device 80x25 [ 0.000508@0] console [tty0] enabled [ 0.000521@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.000528@0] pid_max: default: 32768 minimum: 301 [ 0.000611@0] Security Framework initialized [ 0.000617@0] SELinux: Initializing. [ 0.000654@0] SELinux: Starting in permissive mode [ 0.000683@0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.000688@0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.001328@0] ftrace: allocating 38033 entries in 149 pages [ 0.061322@0] sched-energy: CPU device node has no sched-energy-costs [ 0.061331@0] CPU0: update cpu_capacity 1024 [ 0.061343@0] ASID allocator initialised with 65536 entries [ 0.093155@0] EFI services will not be available. [ 0.141290@1] Detected VIPT I-cache on CPU1 [ 0.141337@1] CPU1: update cpu_capacity 1024 [ 0.141340@1] CPU1: Booted secondary processor [410fd034] [ 0.173335@2] Detected VIPT I-cache on CPU2 [ 0.173360@2] CPU2: update cpu_capacity 1024 [ 0.173362@2] CPU2: Booted secondary processor [410fd034] [ 0.205412@3] Detected VIPT I-cache on CPU3 [ 0.205435@3] CPU3: update cpu_capacity 1024 [ 0.205437@3] CPU3: Booted secondary processor [410fd034] [ 0.205499@0] Brought up 4 CPUs [ 0.205503@0] SMP: Total of 4 processors activated. [ 0.205508@0] CPU features: detected feature: 32-bit EL0 Support [ 0.205579@0] CPU: All CPU(s) started at EL2 [ 0.205598@0] alternatives: patching kernel code [ 0.206629@0] devtmpfs: initialized [ 0.227650@0] DMI not present or invalid. [ 0.227902@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.227912@0] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.239238@0] pinctrl core: initialized pinctrl subsystem [ 0.240112@0] NET: Registered protocol family 16 [ 0.242600@0] schedtune: init normalization constants... [ 0.242603@0] schedtune: no energy model data [ 0.242604@0] schedtune: disabled! [ 0.257555@0] cpuidle: using governor menu [ 0.257628@0] register canvas platform driver [ 0.257657@0] register rdma platform driver [ 0.257690@0] aml_vdac_init: module init [ 0.260155@0] vdso: 2 pages (1 code @ ffffff8009bc7000, 1 data @ ffffff800a975000) [ 0.260172@0] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.261095@0] DMA: preallocated 2048 KiB pool for atomic allocations [ 0.261224@0] clkmsr: clkmsr: driver init [ 0.261227@0] codec_mm_module_init [ 0.261263@0] media_configs_system_init [ 0.262952@0] aml_iomap: amlogic iomap probe done [ 0.263324@0] vpu: driver version: v20190329(7-g12a) [ 0.263330@0] vpu: load vpu_clk: 666666667Hz(7) [ 0.263520@0] vpu: clktree_init [ 0.263569@0] vpu: vpu_probe OK [ 0.266953@0] clkmsr: msr_clk_reg0=ffffff8008238004,msr_clk_reg2=ffffff800823a00c [ 0.266960@0] clkmsr: msr_ring_reg0=ffffff800823c5fc [ 0.270150@0] aml_vdac_probe:probe start.cpu_id:6,name:meson-g12ab-vdac [ 0.270310@0] aml_vdac_probe: ok [ 0.270421@0] canvas_probe reg=00000000ff638000,size=2000 [ 0.270437@0] canvas maped reg_base =ffffff8008268000 [ 0.275897@0] rdma_probe,cpu_type:1, ver:0, len:8 [ 0.276115@0] rdma_register, rdma_table_addr ffffff8008277000 rdma_table_addr_phy d2600000 reg_buf ffffffc0cda18000 [ 0.276120@0] rdma_register success, handle 1 table_size 32768 [ 0.276122@0] set_rdma_handle video rdma handle = 1. [ 0.276807@0] aml_snd_reg_map[0], reg:ff640000, size:2000 [ 0.276816@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.276824@0] aml_snd_reg_map[2], reg:ff64a000, size:2000 [ 0.276832@0] aml_snd_reg_map[3], reg:ff642800, size:1800 [ 0.276843@0] aml_snd_reg_map[4], reg:ffd01000, size:1000 [ 0.276845@0] amlogic auge_snd_iomap probe done [ 0.278110@0] cvbs_out: cvbsout_probe, cpu_id:4,name:meson-g12a-cvbsout [ 0.278123@0] cvbs_out: clk path:0 [ 0.278125@0] cvbs_out: error: failed to get vdac_config [ 0.278283@0] vout: vout1: register server: cvbs_vout_server [ 0.278286@0] cvbs_out: register cvbs module server ok [ 0.278288@0] vout: vout2: register server: cvbs_vout2_server [ 0.278290@0] cvbs_out: register cvbs module vout2 server ok [ 0.278295@0] cvbs_out: chrdev devno 264241152 for disp [ 0.278468@0] cvbs_out: create cdev cvbs [ 0.278471@0] cvbs_out: cvbsout_probe OK [ 0.278916@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma [ 0.278976@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma [ 0.278978@0] codec_mm_probe ok [ 0.451983@2] SCSI subsystem initialized [ 0.452190@2] usbcore: registered new interface driver usbfs [ 0.452236@2] usbcore: registered new interface driver hub [ 0.452318@2] usbcore: registered new device driver usb [ 0.452449@2] pps_core: LinuxPPS API ver. 1 registered [ 0.452452@2] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.452474@2] PTP clock support registered [ 0.452621@2] dmi: Firmware registration failed. [ 0.452937@2] secmon: reserve_mem_size:0x300000 [ 0.453027@2] secmon secmon: assigned reserved memory node linux,secmon [ 0.453030@2] secmon: can't fine clear_range [ 0.453214@2] secmon: get page:ffffffbf00140000, 5000 [ 0.453218@2] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.453221@2] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.453961@2] hdmitx: system: amhdmitx_probe start [ 0.453964@2] hdmitx: system: Ver: 20181019 [ 0.454028@2] hdmitx: system: hdmitx_device.chip_type : 10 [ 0.454030@2] hdmitx: system: hdmitx_device.dongle_mode: 0 [ 0.454062@2] hdmitx: system: not find product desc [ 0.454065@2] hdmitx: system: not find match pwr-ctl [ 0.454089@2] hdmitx: system: hdmitx_device.drm_feature : 0 [ 0.454109@2] hdmitx: system: hpd irq = 30 [ 0.454203@2] hdmitx: system: hdcp22_tx_skp failed to probe [ 0.454207@2] hdmitx: system: hdcp22_tx_esm failed to probe [ 0.454628@2] vout: vout1: register server: hdmitx_vout_server [ 0.454633@2] vout: vout2: register server: hdmitx_vout2_server [ 0.455061@2] hdmitx: hdmitx20: Mapped PHY: 0xffd00000 [ 0.455069@2] hdmitx: hdmitx20: Mapped PHY: 0xff634400 [ 0.455078@2] hdmitx: hdmitx20: Mapped PHY: 0xff900000 [ 0.455094@2] hdmitx: hdmitx20: Mapped PHY: 0xff800000 [ 0.455098@2] hdmitx: hdmitx20: Mapped PHY: 0xff63c000 [ 0.455101@2] hdmitx: hdmitx20: Mapped PHY: 0xffd00000 [ 0.455104@2] hdmitx: hdmitx20: Mapped PHY: 0xff608000 [ 0.455108@2] hdmitx: hdmitx20: Mapped PHY: 0xff600000 [ 0.455111@2] hdmitx: hdmitx20: Mapped PHY: 0xffe01000 [ 0.455119@2] hdmitx: hw: alread display in uboot 0x10 [ 0.455144@2] hdmitx: hw: avmute set to 1 [ 0.455215@2] hdmitx: system: amhdmitx_probe end [ 0.455897@2] vout: create vout attribute OK [ 0.456043@1] vout: vout_fops_create OK [ 0.456046@1] vout: vout1: register server: nulldisp_vout_server [ 0.456071@1] hdmitx: hdmitx_set_current_vmode[3680] [ 0.456074@1] hdmitx: system: recalc before 1080p60hz 60 1 [ 0.456078@1] hdmitx: system: recalc after 1080p60hz 2997 50 [ 0.456082@1] hdmitx: system: get current mode: 1080p60hz [ 0.456085@1] hdmitx: system: update rx hdr info 0 [ 0.456088@1] hdmitx: system: update physcial size: 16 9 [ 0.456105@1] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16 [ 0.456109@1] vout: init mode 1080p60hz set ok [ 0.456206@1] vout: aml_tvout_mode_monitor [ 0.456218@1] vout: aml_vout_probe OK [ 0.456436@1] chip type:0x28 [ 0.456832@1] MEMORY:[100000+f0800000] [ 0.456837@1] ramdump_probe, storage device:data [ 0.456839@1] NO valid ramdump args:0 0 [ 0.456851@1] ramdump_probe, set sticky to 8f09 [ 0.457016@1] Advanced Linux Sound Architecture Driver Initialized. [ 0.457896@1] NetLabel: Initializing [ 0.457899@1] NetLabel: domain hash size = 128 [ 0.457901@1] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.457942@1] NetLabel: unlabeled traffic allowed by default [ 0.460644@1] clocksource: Switched to clocksource arch_sys_counter [ 0.463031@0] hdmitx: system: irq 80000004 0 [ 0.483052@0] hdmitx: system: irq 80000002 0 [ 0.525905@3] VFS: Disk quotas dquot_6.6.0 [ 0.525978@3] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.536830@3] NET: Registered protocol family 2 [ 0.537397@3] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.537604@3] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.538054@3] TCP: Hash tables configured (established 32768 bind 32768) [ 0.538151@3] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.538224@3] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.538472@3] NET: Registered protocol family 1 [ 0.540119@3] wifi: power_on_pin_OD = 0; [ 0.540130@3] aml_wifi wifi: [wifi_dev_probe] no power_on_pin2 [ 0.540226@3] meson-pwm ffd19000.pwm: pwm pinmux : can't get pinctrl [ 0.540267@3] meson-pwm ffd19000.pwm: pwm pinmux : can't get pinctrl [ 0.540283@3] aml_wifi wifi: [pwm_double_channel_conf_dt] wifi pwm dt ok [ 0.540297@3] aml_wifi wifi: [pwm_double_channel_conf] wifi pwm conf ok [ 0.540302@3] aml_wifi wifi: [wifi_dev_probe] dhd_static_buf setup [ 0.540304@3] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem 1.579.77.41.9 [ 0.540627@3] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem prealloc ok [ 0.540697@3] aml_wifi wifi: [wifi_dev_probe] interrupt_pin=483 [ 0.540701@3] aml_wifi wifi: [wifi_dev_probe] irq_num=0, irq_trigger_type=1 [ 0.540705@3] aml_wifi wifi: [wifi_dev_probe] power_on_pin=482 [ 0.540709@3] aml_wifi wifi: [wifi_dev_probe] clock_32k_pin=0 [ 0.540963@2] aml_wifi wifi: [wifi_setup_dt] wifi_setup_dt [ 0.541056@2] aml_wifi wifi: [wifi_setup_dt] irq num is:(52) [ 0.541061@2] aml_wifi wifi: [wifi_setup_dt] interrupt_pin(483) [ 0.541075@2] aml_wifi wifi: [wifi_setup_dt] power_on_pin(482) [ 0.541209@2] Unpacking initramfs... [ 0.558330@2] Freeing initrd memory: 4712K [ 0.560989@2] hw perfevents: clusterb_enabled = 0 [ 0.560993@2] hw perfevents: cpumasks 0xf, 0x0 [ 0.561021@2] hw perfevents: cluster A irq = 10 [ 0.561097@2] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.563752@3] audit: initializing netlink subsys (disabled) [ 0.563817@3] audit: type=2000 audit(0.520:1): initialized [ 0.564562@0] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.574776@2] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.575011@2] Registering sdcardfs 0.1 [ 0.576346@0] SELinux: Registering netfilter hooks [ 0.580193@3] NET: Registered protocol family 38 [ 0.580206@3] Key type asymmetric registered [ 0.580210@3] Asymmetric key parser 'x509' registered [ 0.580463@3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.580470@3] io scheduler noop registered (default) [ 0.580474@3] io scheduler deadline registered [ 0.580674@3] io scheduler cfq registered [ 0.581893@3] meson-pwm ff802000.pwm: pwm pinmux : can't get pinctrl [ 0.582885@2] random: fast init done [ 0.582920@2] random: crng init done [ 0.583205@0] [drm] Initialized [ 0.583290@0] mali ffe40000.bifrost: Continuing without Mali regulator control [ 0.583401@0] mali ffe40000.bifrost: max pp is 2 [ 0.583406@0] mali ffe40000.bifrost: set min pp to default 1 [ 0.583410@0] mali ffe40000.bifrost: min pp is 1 [ 0.583414@0] mali ffe40000.bifrost: min clk is 4 [ 0.583431@0] mali ffe40000.bifrost: hiu io source 0xffffff80083b9000 [ 0.583439@0] mali ffe40000.bifrost: hiu io source 0xffffff80083bb000 [ 0.583444@0] mali ffe40000.bifrost: num of pp used most of time 1 [ 0.583448@0] mali ffe40000.bifrost: clock dvfs cfg table size is 4 [ 0.583525@0] mali ffe40000.bifrost: max clk set 2 [ 0.583529@0] mali ffe40000.bifrost: max clk is 2 [ 0.583533@0] mali ffe40000.bifrost: turbo clk set to 3 [ 0.583536@0] mali ffe40000.bifrost: turbo clk is 3 [ 0.583541@0] mali ffe40000.bifrost: default clk is 1 [ 0.583549@0] mali ffe40000.bifrost: ====================0==================== [ 0.583549@0] clk_freq= 285714285, clk_parent=fclk_div7, voltage=1150, keep_count=2, threshod=<100 200>, clk_sample=285 [ 0.583555@0] mali ffe40000.bifrost: ====================1==================== [ 0.583555@0] clk_freq= 666666666, clk_parent=fclk_div3, voltage=1150, keep_count=1, threshod=<85 200>, clk_sample=666 [ 0.583561@0] mali ffe40000.bifrost: ====================2==================== [ 0.583561@0] clk_freq= 846000000, clk_parent= gp0_pll, voltage=1150, keep_count=1, threshod=<179 255>, clk_sample=846 [ 0.583568@0] mali ffe40000.bifrost: ====================3==================== [ 0.583568@0] clk_freq= 846000000, clk_parent= gp0_pll, voltage=1150, keep_count=1, threshod=<179 255>, clk_sample=846 [ 0.583571@0] mali ffe40000.bifrost: clock dvfs table size is 4 [ 0.583675@0] mali_plat=ffffff800a9fbd90 [ 0.583837@0] meson_gcooldev is null, no set min status [ 0.583841@0] gpu cooling register okay with err=0 [ 0.583916@0] meson_gcooldev is null, no set min status [ 0.583918@0] gpu core cooling register okay with err=0 [ 0.583949@0] shader_present=1, tiler_present=1, l2_present=1 [ 0.584050@0] Mali_pwr_on:gpu_irq : 200 [ 0.584317@0] mali ffe40000.bifrost: GPU identified as 0x3 arch 7.0.9 r0p0 status 0 [ 0.585707@0] mali ffe40000.bifrost: Probed as mali0 [ 0.586167@0] Unable to detect cache hierarchy for CPU 0 [ 0.592082@3] loop: module loaded [ 0.592590@3] mtdoops: mtd device (mtddev=name/number) must be supplied [ 0.593199@3] libphy: Fixed MDIO Bus: probed [ 0.594034@3] REG0:Addr = ffffff80083d1540 [ 0.594044@3] Not set cali_val for REG1 [ 0.594421@3] meson6-dwmac ff3f0000.ethernet: no reset control found [ 0.594425@3] stmmac - user ID: 0x11, Synopsys ID: 0x37 [ 0.594427@3] Ring mode enabled [ 0.594431@3] DMA HW capability register supported [ 0.594434@3] Normal descriptors [ 0.594435@3] RX Checksum Offload Engine supported [ 0.594437@3] COE Type 2 [ 0.594439@3] TX Checksum insertion supported [ 0.594441@3] Wake-Up On Lan supported [ 0.594485@3] Enable RX Mitigation via HW Watchdog Timer [ 0.597728@2] libphy: stmmac: probed [ 0.597737@2] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active [ 0.597741@2] eth%d: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07) [ 0.599375@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.599382@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.599797@2] usbcore: registered new interface driver cdc_acm [ 0.599800@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.599867@2] usbcore: registered new interface driver usb-storage [ 0.599978@2] usbcore: registered new interface driver usbserial [ 0.600023@2] usbcore: registered new interface driver usbserial_generic [ 0.600064@2] usbserial: USB Serial support registered for generic [ 0.600466@0] mousedev: PS/2 mouse device common for all mice [ 0.600912@0] i2c /dev entries driver [ 0.602890@3] ledtrig-cpu: registered to indicate activity on CPUs [ 0.603245@3] hidraw: raw HID events driver (C) Jiri Kosina [ 0.603636@2] usbcore: registered new interface driver usbhid [ 0.603639@2] usbhid: USB HID core driver [ 0.604281@2] value of voltage_tolerance 0 [ 0.605453@2] cpu cpu0: meson_cpufreq_init: CPU 0 initialized [ 0.606616@2] ff803000.serial: clock gate not found [ 0.606712@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff80083d5000 [ 0.606769@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 20, base_baud = 1500000) is a meson_uart [ 0.606792@2] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200 [ 0.650172@2] console [ttyS0] enabled [ 0.651184@3] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff80083d7000 [ 0.651240@3] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart [ 0.652564@0] amlogic-new-usb2-v2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083fa000 [ 0.652960@0] amlogic-new-usb3-v2 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083fe080 [ 0.654674@0] aml_dma ff63e000.aml_dma: Aml dma [ 0.656075@0] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma [ 0.656541@3] aml_tdes_dma ff63e000.aml_dma:aml_tdes: Aml TDES_dma [ 0.657214@3] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma [ 0.657422@3] meson-remote: Driver init [ 0.657724@3] meson-remote: remote_probe [ 0.657746@3] meson-remote ff808040.meson-remote: protocol = 0x1 [ 0.657749@3] meson-remote ff808040.meson-remote: led_blink = 1 [ 0.657753@3] meson-remote ff808040.meson-remote: led_blink_frq = 100 [ 0.657802@3] meson-remote ff808040.meson-remote: platform_data irq =51 [ 0.657808@3] meson-remote ff808040.meson-remote: get_custom_tables:don't find match custom [ 0.660536@3] meson-remote ff808040.meson-remote: default protocol = 0x1 and id = 0 [ 0.660539@3] meson-remote ff808040.meson-remote: reg=0x0, val=0x1f40190 [ 0.660542@3] meson-remote ff808040.meson-remote: reg=0x4, val=0x12c00c8 [ 0.660544@3] meson-remote ff808040.meson-remote: reg=0x8, val=0x960050 [ 0.660547@3] meson-remote ff808040.meson-remote: reg=0xc, val=0x480028 [ 0.660549@3] meson-remote ff808040.meson-remote: reg=0x10, val=0x70fa0013 [ 0.660552@3] meson-remote ff808040.meson-remote: reg=0x18, val=0x8616800 [ 0.660554@3] meson-remote ff808040.meson-remote: reg=0x1c, val=0x9f00 [ 0.660557@3] meson-remote ff808040.meson-remote: reg=0x20, val=0x0 [ 0.660560@3] meson-remote ff808040.meson-remote: reg=0x24, val=0x0 [ 0.660562@3] meson-remote ff808040.meson-remote: reg=0x28, val=0x0 [ 0.661277@2] input: aml_keypad as /devices/platform/ff808040.meson-remote/input/input0 [ 0.661650@2] meson-remote: IR XMP protocol handler initialized [ 0.664035@2] ion_dev soc:ion_dev: assigned reserved memory node linux,ion-dev [ 0.664705@0] ge2d: ge2d_init_module [ 0.665004@0] ge2d: ge2d_dev major:237 [ 0.665382@2] ge2d: clock source clk_ge2d_gate ffffffc0cd430080 [ 0.665412@2] ge2d: clock clk_ge2d source ffffffc0cd430100 [ 0.665425@2] ge2d: clock source clk_vapb_0 ffffffc0cd430180 [ 0.665428@2] ge2d: ge2d init clock is 500000000 HZ, VPU clock is 666666656 HZ [ 0.665543@2] ge2d: ge2d clock is 499 MHZ [ 0.665555@2] ge2d: find address resource [ 0.665580@2] ge2d: map io source 0x00000000ff940000,size=65536 to 0xffffff8008520000 [ 0.665583@2] ge2d: reserved mem init failed [ 0.665586@2] ge2d: ge2d: pdev=ffffffc0cd9e5400, irq=33, clk=ffffffc0cd430080 [ 0.665652@2] ge2d: ge2d start monitor [ 0.665737@3] ge2d: ge2d workqueue monitor start [ 0.666400@2] amvideom vsync irq: 34 [ 0.667499@2] amvideocap_probe,amvideocap [ 0.667529@2] use cma buf. [ 0.669047@3] fb: osd_init_module [ 0.669474@3] fb: viu vsync irq: 34 [ 0.669481@3] fb: viu2 vsync irq: 42 [ 0.669661@3] 0x000000d8:Y=d8,U=0,V=0 [ 0.669663@3] 0x000000d9:Y=d9,U=0,V=0 [ 0.669665@3] 0x000000da:Y=da,U=0,V=0 [ 0.669666@3] 0x000000db:Y=db,U=0,V=0 [ 0.670164@2] fb: osd_rdma_init: rdma_table p=0xd2608000,op=0xd2608000 , v=0xffffff8008515000 [ 0.670222@2] rdma_register, rdma_table_addr ffffff8008517000 rdma_table_addr_phy d2609000 reg_buf ffffffc0cd952000 [ 0.670225@2] rdma_register success, handle 2 table_size 4096 [ 0.670227@2] fb: osd_rdma_init:osd rdma handle = 2. [ 0.670246@2] fb: mem_size: 0x800000 [ 0.670248@2] fb: mem_size: 0x4b80000 [ 0.670249@2] fb: mem_size: 0x100000 [ 0.670250@2] fb: mem_size: 0x100000 [ 0.670252@2] fb: mem_size: 0x800000 [ 0.670410@2] meson-fb meson-fb: assigned reserved memory node linux,meson-fb [ 0.670414@2] fb: reserved memory base:0x0000000077800000, size:800000 [ 0.670697@2] fb: fb def : 1920 1080 1920 2160 32 [ 0.670698@2] fb: init fbdev bpp is:32 [ 0.685338@0] fb: osd[0] enable: 1 (swapper/0) [ 0.702954@2] fb: set osd0 reverse as NONE [ 0.718776@0] fb: osd probe OK [ 0.719131@0] hdmitx: hdcp: hdmitx_hdcp_init [ 0.720226@0] vout: vout2: create vout2 attribute OK [ 0.720555@2] vout: vout2: vout2_fops_create OK [ 0.720561@2] vout: vout2: register server: nulldisp_vout2_server [ 0.720573@2] vout: vout2: init mode null set ok [ 0.720900@2] vout: vout2: clktree_init [ 0.721021@2] vout: vout2: aml_vout2_probe OK [ 0.721230@2] DI: di_module_init ok. [ 0.721239@2] DI: di_module_init: major 510 [ 0.721862@3] deinterlace deinterlace: assigned reserved memory node linux,di_cma [ 0.721873@3] DI: CMA size 0x2800000. [ 0.721904@3] pre_irq:48 [ 0.721910@3] post_irq:49 [ 0.721912@3] DI: di_probe allocate rdma channel 0. [ 0.721922@3] di_get_vpu_clkb: get clk vpu error. [ 0.721977@3] DI: vpu clkb <334000000, 667000000> [ 0.722029@3] DI:enable vpu clkb. [ 0.722042@3] 0x000000dc:Y=dc,U=0,V=0 [ 0.722044@3] 0x000000dd:Y=dd,U=0,V=0 [ 0.722046@3] 0x000000de:Y=de,U=0,V=0 [ 0.722048@3] 0x000000df:Y=df,U=0,V=0 [ 0.722049@3] 0x000000e0:Y=e0,U=0,V=0 [ 0.722051@3] 0x000000e1:Y=e1,U=0,V=0 [ 0.722052@3] 0x000000e2:Y=e2,U=0,V=0 [ 0.722054@3] 0x000000e3:Y=e3,U=0,V=0 [ 0.722055@3] 0x000000f0:Y=f0,U=0,V=0 [ 0.722057@3] 0x000000f1:Y=f1,U=0,V=0 [ 0.722061@3] 0x000000f2:Y=f2,U=0,V=0 [ 0.722063@3] 0x000000f3:Y=f3,U=0,V=0 [ 0.722064@3] 0x000000f4:Y=f4,U=0,V=0 [ 0.722066@3] 0x000000f5:Y=f5,U=0,V=0 [ 0.722068@3] 0x000000f6:Y=f6,U=0,V=0 [ 0.722069@3] 0x000000f7:Y=f7,U=0,V=0 [ 0.722072@3] 0x000000f8:Y=f8,U=0,V=0 [ 0.722073@3] 0x000000f9:Y=f9,U=0,V=0 [ 0.722075@3] 0x000000fa:Y=fa,U=0,V=0 [ 0.722077@3] 0x000000fb:Y=fb,U=0,V=0 [ 0.722079@3] 0x000000fc:Y=fc,U=0,V=0 [ 0.722080@3] 0x000000fd:Y=fd,U=0,V=0 [ 0.722083@3] 0x000000fe:Y=fe,U=0,V=0 [ 0.722084@3] DI: support post write back 254. [ 0.722261@3] DI: di_probe:Di use HRTIMER [ 0.722418@2] di_probe:ok [ 0.722559@2] vdin_drv_init: major 509 [ 0.722887@2] vdin_drv_init: vdin driver init done [ 0.722892@2] [viuin..]viuin_init_module viuin module init [ 0.723277@2] [viuin..]viuin_probe probe ok. [ 0.723671@2] [RX]-hdmirx: hdmirx_init. [ 0.723675@2] ESM HLD: Initializing... [ 0.723903@0] tvin_afe: tvafe_drv_init: major 507 [ 0.724145@0] tvin_afe: tvafe_drv_init. [ 0.724286@0] tvafe_vbi: vbi: vbi_init. [ 0.724415@0] PPMGRDRV: warn: ppmgr module init func called [ 0.724541@0] PPMGRDRV: err: ppmgr_driver_probe called [ 0.726322@0] Reserved memory: failed to init DMA memory pool at 0x00000000f0900000, size 0 MiB [ 0.734826@0] PPMGRDRV: info: ppmgr_dev major:505 [ 0.735857@3] picdec_driver_probe called. [ 0.736241@2] picdec: probe of picdec failed with error -22 [ 0.736514@0] videosync_create_instance dev_s ffffffc0ac569c00,dev_s->dev ffffffc0b81f2780 [ 0.736518@0] videosync_create_instance reg videosync.0 [ 0.736610@0] aml_vecm_init:module init [ 0.736614@2] videosync_thread started [ 0.737014@0] [ 0.737014@0] VECM probe start [ 0.737347@2] Can't find wb_sel. [ 0.737349@2] hdr:Can't find cfg_en_osd_100. [ 0.737354@2] amlogic, vecm [ 0.737357@2] vlock dt support: 1 [ 0.737359@2] vlock dt new_fsm: 0 [ 0.737360@2] vlock dt hwver: 0 [ 0.737362@2] vlock dt phlock_en: 0 [ 0.737364@2] Can't find vlock_en. [ 0.737366@2] Can't find vlock_mode. [ 0.737368@2] Can't find vlock_pll_m_limit. [ 0.737370@2] Can't find vlock_line_limit. [ 0.737384@2] param_config vlock_en:1 [ 0.737412@2] vlock_status_init vlock_en:0 [ 0.737414@2] aml_vecm_probe: ok [ 0.738130@2] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller [ 0.739421@0] meson-mmc: >>>>>>>>hostbase ffffff8008535000, dmode [ 0.741495@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80 [ 0.741499@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c [ 0.741542@0] meson-mmc: emmc: fixdiv calc done: adj = 2d2000 [ 0.751966@0] 1A2B com register: 82820501 [ 0.751976@0] 1A4B com register: 82820501 [ 0.751977@0] 1A4C com register: 90b8f47f [ 0.751979@0] 1C32 com register: 00000000 [ 0.751980@0] 1C34 com register: 00000005 [ 0.751982@0] 1C3D com register: 00000462 [ 0.752021@0] 1A2B com register: 82820501 [ 0.752022@0] 1A4B com register: 82820501 [ 0.752024@0] 1A4C com register: 90b8f47f [ 0.752025@0] 1C32 com register: 00000000 [ 0.752027@0] 1C34 com register: 00000005 [ 0.752028@0] 1C3D com register: 00000462 [ 0.784701@0] meson-mmc: meson_mmc_probe() : success! [ 0.795844@3] meson-mmc: >>>>>>>>hostbase ffffff800853e000, dmode [ 0.796541@3] meson-mmc: gpio_cd = 1ca [ 0.837953@3] meson-mmc: >>>>>>>>hostbase ffffff800853e000, dmode [ 0.838886@3] meson-mmc: actual_clock :400000, HHI_nand: 0x80 [ 0.838889@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c [ 0.876691@3] meson-mmc: meson_mmc_probe() : success! [ 0.877103@3] amlogic mtd driver init [ 0.878251@2] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0 [ 0.878445@2] input: aml_vkeypad as /devices/platform/rtc/input/input1 [ 0.879607@0] cectx ff80023c.aocec: cec driver date:Ver 2019/3/25 [ 0.879607@0] [ 0.882136@3] cectx ff80023c.aocec: compatible:amlogic, aocec-g12a [ 0.887954@3] cectx ff80023c.aocec: cecb_ver:0x1 [ 0.892499@3] cectx ff80023c.aocec: line_reg:0x1 [ 0.897106@3] cectx ff80023c.aocec: line_bit:0x3 [ 0.901744@3] cectx ff80023c.aocec: ee_to_ao:0x1 [ 0.906503@3] input: cec_input as /devices/virtual/input/input2 [ 0.906832@2] cectx ff80023c.aocec: not find 'port_num' [ 0.911485@2] cectx ff80023c.aocec: using cec:0 [ 0.916024@2] cectx ff80023c.aocec: no hdmirx regs [ 0.920815@2] cectx ff80023c.aocec: no hhi regs [ 0.925303@2] cectx ff80023c.aocec: not find 'output' [ 0.933441@2] cectx ff80023c.aocec: irq cnt:2 [ 0.935031@0] cectx ff80023c.aocec: wakeup_reason:0x0 [ 0.939856@0] cectx ff80023c.aocec: cev val1: 0x0;val2: 0x0 [ 0.945329@0] cectx ff80023c.aocec: aml_cec_probe success end [ 0.951910@0] unifykey: storage in base: 0xffffffc005000000 [ 0.951914@0] unifykey: storage out base: 0xffffffc005040000 [ 0.951916@0] unifykey: storage block base: 0xffffffc005080000 [ 0.951917@0] unifykey: probe done! [ 0.952849@0] unifykey: no efuse-version set, use default value: -1 [ 0.952853@0] unifykey: key unify config unifykey-num is 16 [ 0.952911@0] unifykey: key unify fact unifykey-num is 16 [ 0.952927@0] unifykey: unifykey_devno: 1f400000 [ 0.953400@2] unifykey: device unifykeys created ok [ 0.953486@2] unifykey: aml_unifykeys_init done! [ 0.953635@2] meson ts init [ 0.953909@2] tsensor id: 0 [ 0.954109@2] tsensor trim info: 0xfa008040! [ 0.954112@2] tsensor hireboot: 0xc0ff2a90 [ 0.954222@2] meson ts init [ 0.954240@2] tsensor id: 1 [ 0.954320@2] tsensor trim info: 0xfa000004! [ 0.954321@2] tsensor hireboot: 0xc0ff2a80 [ 0.954593@2] audio_dsp: [dsp]register dsp to char divece(257) [ 0.954860@2] amaudio: amaudio: driver amaudio init! [ 0.955245@0] amaudio: amaudio_init - amaudio: driver amaudio succuess! [ 0.956051@3] sysled: module init [ 0.956369@3] meson_wdt ffd0f0d0.watchdog: start watchdog [ 0.956373@3] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 0.956671@3] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 0.957173@2] amlogic rfkill init [ 0.957300@2] enter bt_probe of_node [ 0.957354@2] not get gpio_en [ 0.957361@2] power on valid level is high [ 0.957363@2] bt: power_on_pin_OD = 0; [ 0.957366@2] bt: power_off_flag = 1; [ 0.957367@2] dis power down = 0; [ 0.970174@0] meson-aml-mmc ffe07000.emmc: divider requested rate 200000000 != actual rate 199999997: ret=0 [ 0.970186@0] meson-mmc: actual_clock :199999997, HHI_nand: 0x80 [ 0.970188@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000345 [ 0.970195@0] meson-mmc: Data 1 aligned delay is 0 [ 0.970198@0] meson-mmc: emmc: clk 199999997 tuning start [ 0.971966@0] meson-mmc: emmc: rx_tuning_result[0] = 40 [ 0.972999@0] meson-mmc: emmc: rx_tuning_result[1] = 40 [ 0.973024@0] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac [ 0.975545@0] meson-mmc: emmc: rx_tuning_result[3] = 40 [ 0.976378@0] meson-mmc: emmc: rx_tuning_result[4] = 40 [ 0.976381@0] meson-mmc: emmc: best_win_start =3, best_win_size =4 [ 0.976385@0] meson-mmc: emmc: sd_emmc_regs->gclock=0x10000345,sd_emmc_regs->gadjust=0x2000 [ 0.976485@0] emmc: new HS200 MMC card at address 0001 [ 0.976489@0] emmc: clock 199999997, 8-bit-bus-width [ 0.976489@0] [ 0.977339@0] mmcblk0: emmc:0001 BJTD4R 29.1 GiB [ 0.977538@0] mmcblk0boot0: emmc:0001 BJTD4R partition 1 4.00 MiB [ 0.977711@0] mmcblk0boot1: emmc:0001 BJTD4R partition 2 4.00 MiB [ 0.977889@0] mmcblk0rpmb: emmc:0001 BJTD4R partition 3 4.00 MiB [ 0.979366@0] meson-mmc: Enter aml_emmc_partition_ops [ 0.979801@0] meson-mmc: [mmc_read_partition_tbl] mmc read partition OK! [ 0.979803@0] meson-mmc: add_emmc_partition [ 0.980093@0] meson-mmc: [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000 [ 0.980274@0] meson-mmc: [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000 [ 0.980293@0] meson-mmc: [mmcblk0p03] cache offset 0x000006c00000, size 0x000046000000 [ 0.980444@0] meson-mmc: [mmcblk0p04] env offset 0x00004d400000, size 0x000000800000 [ 0.980458@0] meson-mmc: [mmcblk0p05] logo offset 0x00004e400000, size 0x000000800000 [ 0.980469@0] meson-mmc: [mmcblk0p06] recovery offset 0x00004f400000, size 0x000001800000 [ 0.980479@0] meson-mmc: [mmcblk0p07] misc offset 0x000051400000, size 0x000000800000 [ 0.980618@0] meson-mmc: [mmcblk0p08] dtbo offset 0x000052400000, size 0x000000800000 [ 0.980659@0] meson-mmc: [mmcblk0p09] cri_data offset 0x000053400000, size 0x000000800000 [ 0.980674@0] meson-mmc: [mmcblk0p10] param offset 0x000054400000, size 0x000001000000 [ 0.980686@0] meson-mmc: [mmcblk0p11] boot offset 0x000055c00000, size 0x000001000000 [ 0.980696@0] meson-mmc: [mmcblk0p12] rsv offset 0x000057400000, size 0x000001000000 [ 0.980705@0] meson-mmc: [mmcblk0p13] metadata offset 0x000058c00000, size 0x000001000000 [ 0.980715@0] meson-mmc: [mmcblk0p14] vbmeta offset 0x00005a400000, size 0x000000200000 [ 0.980724@0] meson-mmc: [mmcblk0p15] tee offset 0x00005ae00000, size 0x000002000000 [ 0.980733@0] meson-mmc: [mmcblk0p16] vendor offset 0x00005d600000, size 0x000010000000 [ 0.980743@0] meson-mmc: [mmcblk0p17] odm offset 0x00006de00000, size 0x000008000000 [ 0.980876@0] meson-mmc: [mmcblk0p18] system offset 0x000076600000, size 0x000050000000 [ 0.980893@0] meson-mmc: [mmcblk0p19] product offset 0x0000c6e00000, size 0x000008000000 [ 0.980905@0] meson-mmc: [mmcblk0p20] data offset 0x0000cf600000, size 0x000678600000 [ 0.980936@0] card key: card_blk_probe. [ 0.980942@0] emmc_key_init:183 emmc key lba_start:0x12020,lba_end:0x12220 [ 0.980947@0] emmc key: emmc_key_init:205 ok. [ 0.980951@0] meson-mmc: amlmmc_dtb_init: register dtb chardev [ 0.983519@0] meson-mmc: calc d233d68f, store d233d68f [ 0.985781@0] meson-mmc: calc d233d68f, store d233d68f [ 0.985785@0] meson-mmc: total valid 2 [ 0.986105@0] meson-mmc: amlmmc_dtb_init: register dtb chardev OK [ 0.986159@0] meson-mmc: Exit aml_emmc_partition_ops OK. [ 0.996658@1] hdmitx: system: plugin [ 0.998682@1] hdmitx: hdmitx: ddc rd8b error 0x50 0x00 0x00 [ 1.040698@3] meson-mmc: card IN [ 1.127891@1] hdmitx: edid: EDID Parser: [ 1.127898@1] hdmitx: edid: get dtd0 vic: 16 [ 1.127901@1] hdmitx: edid: get dtd1 vic: 4 [ 1.127912@1] hdmitx: edid: change preferred_mode from 16 to 31 [ 1.127914@1] hdmitx: edid: find IEEEOUT [ 1.127935@1] hdmitx: edid: check sum valid [ 1.127936@1] hdmitx: edid: check sum valid [ 1.127940@1] hdmitx: edid: update rx hdr info 0 at edid parsing [ 1.127943@1] hdmitx: edid: check sum valid [ 1.127944@1] hdmitx: edid: check sum valid [ 1.127947@1] hdmitx: edid: blk0 raw data [ 1.127971@1] hdmitx: edid: [ 1.127971@1] 00ffffffffffff004dd9034b0101010101180103806f3e780a0dc9a057479827 [ 1.127971@1] 12484c2108008180a9c0714fb3000101010101010101023a801871382d40582c [ 1.127971@1] 4500536f4200001e011d007251d01e206e285500536f4200001e000000fc0053 [ 1.127971@1] 4f4e592054560a2020202020000000fd00303e0e460f000a2020202020200118 [ 1.127971@1] [ 1.127971@1] [ 1.127973@1] hdmitx: edid: blk1 raw data [ 1.127996@1] hdmitx: edid: [ 1.127996@1] 02032ff0531f101405130420223c3e121603071115020601260d070715075083 [ 1.127996@1] 0f000068030c003000b82d0fe200fb023a80d072382d40102c4580536f420000 [ 1.127996@1] 1e011d00bc52d01e20b8285540536f4200001e011d8018711c1620582c250053 [ 1.127996@1] 6f4200009e011d80d0721c1620102c2580536f4200009e000000000000000046 [ 1.127996@1] [ 1.127996@1] [ 1.127999@1] hdmitx: system: update physcial size: 1110 620 [ 1.128004@1] hdmitx: system: get current mode: 1080p60hz [ 1.128006@1] hdmitx: system: update rx hdr info 0 [ 1.128008@1] hdmitx: system: update physcial size: 1110 620 [ 1.128023@1] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16 [ 1.128025@1] hdmitx: hw: set audio [ 1.128030@1] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 0, hdev->aud_output_ch = 0 [ 1.128039@0] hdmitx: system: irq 80000001 0 [ 1.128042@1] hdmitx: fs = 0, cd = 4, tmds_clk = 148352 [ 1.128043@1] hdmitx: hw: aud_n_para = 5824 [ 1.128050@1] hdmitx: hw: set channel status [ 1.140119@1] Now can use cma, free:2552, wm:2656 [ 1.145382@3] meson-mmc: normal card in [ 1.228709@1] hdmitx: [0x10000103]: 0x00000008 [ 1.228714@1] hdmitx: [0x10000104]: 0x00000001 [ 1.228717@1] hdmitx: [0x10000170]: 0x00000010 [ 1.228719@1] hdmitx: [0x10000180]: 0x000000ff [ 1.228721@1] hdmitx: [0x10000181]: 0x000000ff [ 1.228723@1] hdmitx: [0x10000182]: 0x00000003 [ 1.228724@1] hdmitx: [0x10000183]: 0x00000007 [ 1.228726@1] hdmitx: [0x10000184]: 0x0000003f [ 1.228728@1] hdmitx: [0x10000185]: 0x00000002 [ 1.228730@1] hdmitx: [0x10000187]: 0x000000ff [ 1.228732@1] hdmitx: [0x10000188]: 0x00000003 [ 1.241438@1] clear:e6c00000, free:e6c00000, tick:745754 us [ 1.268697@3] meson-mmc: actual_clock :400000, HHI_nand: 0x80 [ 1.268700@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c [ 1.333594@3] meson-mmc: actual_clock :50000000, HHI_nand: 0x80 [ 1.333597@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000254 [ 1.333943@3] sd: new high speed SDHC card at address 0001 [ 1.333946@3] sd: clock 50000000, 4-bit-bus-width [ 1.333946@3] [ 1.334373@3] mmcblk1: sd:0001 SD16G 29.3 GiB [ 1.335635@3] mmcblk1: p1 p2 [ 1.401006@2] meson-saradc ff809000.saradc: set delay per tick to <1ms> by default. [ 1.401011@2] meson-saradc ff809000.saradc: set ticks per period to <1> by default. [ 1.401896@2] dmc_monitor_probe [ 1.418313@2] defendkey ff630218.defendkey: Reserved memory is not enough! [ 1.419559@2] defendkey: probe of ff630218.defendkey failed with error -22 [ 1.419853@2] register clk_set_setting cpu[40] [ 1.419985@2] Registered firmware driver success. [ 1.420548@2] Try to load video/h264_enc.bin ... [ 1.420589@2] load firmware size : 76288, Name : video/h264_enc.bin. [ 1.420596@2] the fw pack ver v0.0 is too lower. [ 1.420597@2] it may work abnormally so need to be update in time. [ 1.421108@2] Try to load video/video_ucode.bin ... [ 1.421905@2] load firmware size : 1671680, Name : video/video_ucode.bin. [ 1.431583@2] ammvdec_mpeg4_driver_init_module [ 1.431630@2] amvdec_vc1 module init [ 1.431675@2] amvdec_h264 module init [ 1.431782@2] ammvdec_h264 module init [ 1.431829@2] amvdec_h265 module init [ 1.431916@2] amvdec_vp9 module init [ 1.432129@2] amvdec_avs module init [ 1.432278@2] amvenc_avc_probe -- reserved memory config fail. [ 1.432280@2] amvenc_avc - cma memory pool size: 60 MB [ 1.432294@2] encode_wq_init. [ 1.432298@2] encode start monitor. [ 1.432581@2] vpu_init [ 1.432709@2] vpu_probe [ 1.432711@2] HevcEnc reserved memory config fail. [ 1.432713@2] HevcEnc - cma memory pool size: 64 MB [ 1.432726@2] HevcEnc - wave420l_irq: 40 [ 1.432759@2] vpu base address get from platform driver physical base addr=0xff610000, virtual base=0xffffff80085b0000 [ 1.432921@2] success to probe vpu device with video memory from cma [ 1.433096@2] Amlogic A/V streaming port init [ 1.433976@2] get gate demux control ok ffffffc0cd051340 [ 1.433987@2] get gate parser_top control ok ffffffc0cd0513c0 [ 1.434011@2] get gate vdec control ok ffffffc0cd051440 [ 1.434041@2] get gate clk_81 control ok ffffffc0cd0514c0 [ 1.434075@2] get gate clk_vdec_mux control ok ffffffc0cd051540 [ 1.434114@2] get gate clk_hcodec_mux control ok ffffffc0cd0515c0 [ 1.434158@2] get gate clk_hevc_mux control ok ffffffc0cd051640 [ 1.434206@2] get gate clk_hevcb_mux control ok ffffffc0cd0516c0 [ 1.434225@2] get gate ahbarb0 control ok ffffffc0cd051740 [ 1.434230@2] get gate asyncfifo control failed (null) [ 1.434544@2] bl301_manager: driver init [ 1.434546@2] bl301_manager: IR remote wake-up code: 0xffffffff [ 1.434548@2] bl301_manager: IR remote wake-up code mask: 0xffffffff [ 1.434549@2] bl301_manager: IR remote wake-up code protocol: 0x0 [ 1.434551@2] bl301_manager: enable 5V system power on suspend/power off state: 0 [ 1.434588@2] encode workqueue monitor start. [ 1.439299@2] usbcore: registered new interface driver snd-usb-audio [ 1.440261@2] aml_codec_T9015 ff632000.t9015: aml_T9015_audio_codec_probe [ 1.440343@2] T9015 acodec used by auge, tdmout:1 [ 1.441266@2] Error: Driver 'spdif-dit' is already registered, aborting... [ 1.442773@2] asoc debug: aml_audio_controller_probe-116 [ 1.443642@2] asoc-aml-card auge_sound: aml_card_probe, parse error -517 [ 1.449203@2] aml_card_probe error ret:-517 [ 1.453781@2] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4 [ 1.453793@2] TDM id 0 i2s2hdmi:0 [ 1.453801@2] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 0, lane_oe_mask_out = 0 [ 1.453940@2] No channel mask node Channel_Mask [ 1.454138@2] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 1.454190@2] TDM id 1 samesource_sel:3 [ 1.454191@2] TDM id 1 i2s2hdmi:0 [ 1.454197@2] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 1, lane_oe_mask_out = 0 [ 1.454384@2] No channel mask node Channel_Mask [ 1.454523@2] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 1.454532@2] TDM id 2 i2s2hdmi:0 [ 1.454537@2] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0 [ 1.454672@2] No channel mask node Channel_Mask [ 1.455126@2] aml_spdif_platform_probe, spdif ID = 0 [ 1.455365@2] SPDIF id 0 asrc_id:0 auto_asrc:0 [ 1.455432@2] spdifout_play_with_zerodata, spdif id:0 enable:0 [ 1.455436@2] spdif_a fifo ctrl, frddr:0 type:3, 32 bits, chmask 0x3, swap 0x10 [ 1.455441@2] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200 [ 1.455446@2] hdmitx: audio: aout notify format CT_PCM [ 1.455448@2] hdmitx: hw: set audio [ 1.455451@2] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0 [ 1.455463@2] hdmitx: fs = 3, cd = 4, tmds_clk = 148352 [ 1.455465@2] hdmitx: hw: aud_n_para = 5824 [ 1.455472@2] hdmitx: hw: set channel status [ 1.455503@2] hdmitx: audio: Audio Type: PCM [ 1.455504@2] hdmitx: audio: set audio param [ 1.455508@2] spdif_a is set to enable [ 1.455515@2] aml_spdif_platform_probe, register soc platform [ 1.455547@2] aml_spdif_platform_probe, spdif ID = 1 [ 1.455595@2] spdifout_play_with_zerodata, spdif id:1 enable:0 [ 1.455598@2] spdif_b fifo ctrl, frddr:0 type:3, 32 bits, chmask 0x3, swap 0x10 [ 1.455601@2] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200 [ 1.455605@2] spdif_b is set to enable [ 1.455611@2] aml_spdif_platform_probe, register soc platform [ 1.456167@2] default set lane_mask_in as all lanes. [ 1.456169@2] aml_pdm_platform_probe pdm filter mode from dts:1 [ 1.456177@2] aml_pdm_platform_probe, register soc platform [ 1.456423@2] audio_ddr_mngr: 0, irqs toddr 21, frddr 24 [ 1.456425@2] audio_ddr_mngr: 1, irqs toddr 22, frddr 25 [ 1.456427@2] audio_ddr_mngr: 2, irqs toddr 23, frddr 26 [ 1.456619@2] audiolocker_platform_probe [ 1.456979@2] resample_platform_probe [ 1.457338@2] parse power det src:4, hi_th:0x70000, lo_th:0x16000 [ 1.457738@2] Register vad [ 1.457920@2] Netfilter messages via NETLINK v0.30. [ 1.458011@2] Initializing XFRM netlink socket [ 1.458023@2] NET: Registered protocol family 17 [ 1.458050@2] Key type dns_resolver registered [ 1.459620@2] Registered swp emulation handler [ 1.459631@2] Registered cp15_barrier emulation handler [ 1.459636@2] Registered setend emulation handler [ 1.460003@2] registered taskstats version 1 [ 1.672749@2] aml_dai_spdif_probe [ 1.672759@2] aml_dai_spdif_probe [ 1.672775@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 1.674890@2] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16 [ 1.682281@2] aml_dai_tdm_probe, failed add snd spdif controls [ 1.688070@2] set normal 512 fs /4 fs [ 1.688095@2] set spdifout clk:6144000, mpll:24576000 [ 1.688097@2] get spdifout clk:6143997, mpll:24575987 [ 1.688105@2] aml_dai_set_spdif_fmt , fmt 0x4010 [ 1.688188@2] aml_spdif_new spdif_b, clk continuous:1 [ 1.688190@2] spdifout_play_with_zerodata_free, spdif id:1 [ 1.688409@2] asoc-aml-card auge_sound: dummy <-> SPDIF-B mapping ok [ 1.688423@2] set mclk:12288000, mpll:24576000, get mclk:12287994, mpll:24575987 [ 1.688425@2] aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3) [ 1.688427@2] lanes_out_cnt(1), lanes_in_cnt(1) [ 1.688429@2] lanes_oe_out_cnt(0), lanes_oe_in_cnt(0) [ 1.688430@2] lanes_lb_cnt(0) [ 1.688431@2] slots(2), slot_width(32) [ 1.688440@2] asoc aml_dai_set_tdm_fmt, 0x4011, ffffffc0cdad6318, id(1), clksel(1) [ 1.688445@2] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3) [ 1.688719@2] asoc-aml-card auge_sound: T9015-audio-hifi <-> TDM-B mapping ok [ 1.688721@2] set normal 512 fs /4 fs [ 1.688733@2] set spdifout clk:6144000, mpll:24576000 [ 1.688735@2] get spdifout clk:6143997, mpll:24575987 [ 1.688737@2] aml_dai_set_spdif_fmt , fmt 0x4010 [ 1.688804@2] aml_spdif_new spdif_a, clk continuous:1 [ 1.688806@2] spdifout_play_with_zerodata_free, spdif id:0 [ 1.689009@2] asoc-aml-card auge_sound: dummy <-> SPDIF mapping ok [ 1.689022@2] set mclk:12288000, mpll:24576000, get mclk:12287994, mpll:24575987 [ 1.689024@2] aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3) [ 1.689026@2] lanes_out_cnt(4), lanes_in_cnt(1) [ 1.689027@2] lanes_oe_out_cnt(0), lanes_oe_in_cnt(0) [ 1.689028@2] lanes_lb_cnt(0) [ 1.689030@2] slots(2), slot_width(32) [ 1.689034@2] asoc aml_dai_set_tdm_fmt, 0x4011, ffffffc0cd8b0418, id(2), clksel(2) [ 1.689038@2] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3) [ 1.689248@2] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok [ 1.690241@2] snd_card_add_kcontrols card:ffffffc0ac58d818 [ 1.690260@2] effect_v2 is not init [ 1.690261@2] Not init vad [ 1.690263@2] Failed to add VAD controls [ 1.690284@2] eq/drc v1 function enable [ 1.716708@2] add line-out mute controls [ 1.717261@2] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 1.719950@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.719963@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.719972@2] usb: xhci: determined sg_tablesize: 4294967295 [ 1.720197@2] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x20010010 [ 1.720229@2] xhci-hcd xhci-hcd.0.auto: irq 14, io mem 0xff500000 [ 1.720334@2] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.720338@2] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.720340@2] usb usb1: Product: xHCI Host Controller [ 1.720343@2] usb usb1: Manufacturer: Linux 4.9.190 xhci-hcd [ 1.720345@2] usb usb1: SerialNumber: xhci-hcd.0.auto [ 1.720757@2] hub 1-0:1.0: USB hub found [ 1.720776@2] hub 1-0:1.0: 2 ports detected [ 1.720977@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.720985@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.720992@2] usb: xhci: determined sg_tablesize: 4294967295 [ 1.721027@2] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.721090@2] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.721093@2] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.721096@2] usb usb2: Product: xHCI Host Controller [ 1.721099@2] usb usb2: Manufacturer: Linux 4.9.190 xhci-hcd [ 1.721101@2] usb usb2: SerialNumber: xhci-hcd.0.auto [ 1.721389@2] hub 2-0:1.0: USB hub found [ 1.721404@2] hub 2-0:1.0: 1 port detected [ 1.721795@2] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:07 UTC (1420070407) [ 1.722041@2] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc0cd91c000) [ 1.722065@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 1.722070@2] dwc_otg_driver_probe host only, not probe usb_otg!!! [ 1.722947@2] meson_cdev probe [ 1.722956@2] thermal: read gpupp failed [ 1.723085@2] meson_cdev index: 0 [ 1.723188@2] thermal: read gpupp failed [ 1.725224@2] meson_cdev index: 1 [ 1.725229@2] cpucore_cooling_register, max_cpu_core_num:4 [ 1.725317@2] meson_cdev index: 2 [ 1.725320@2] thermal: read gpupp failed [ 1.729071@2] meson_cdev index: 3 [ 1.729103@2] find tzd id: 0 [ 1.729203@2] find tzd id: 0 [ 1.729228@2] meson_cdev probe done [ 1.729356@2] gxbb_pm: enter meson_pm_probe! [ 1.729378@2] gxbb_pm: meson_pm_probe done [ 1.729628@2] ALSA device list: [ 1.729631@2] #0: AML-AUGESOUND [ 1.730951@2] Freeing unused kernel memory: 4800K [ 1.765060@1] fb: malloc_osd_memory, cma:ffffff800abc7670 [ 1.765067@1] fb: malloc_osd_memory, 1283, base:0x0000000077800000, size:8388608 [ 1.765093@1] fb: use ion buffer for fb memory, fb_index=0 [ 1.782033@1] meson-fb meson-fb: create ion_client ffffffc0ac61a240, handle=ffffffc0cda5f000 [ 1.782040@1] meson-fb meson-fb: ion memory(0): created fb at 0x00000000e8800000, size 75 MiB [ 1.782043@1] fb: Frame buffer memory assigned at [ 1.782046@1] fb: 0, phy: 0x00000000e8800000, vir:0xffffff800acba000, size=77312K [ 1.782046@1] [ 1.782049@1] fb: logo_index=0,fb_index=0 [ 1.782051@1] fb: ---------------clear fb0 memory ffffff800acba000 [ 1.803256@1] fb: osd[0] canvas.idx =0x40 [ 1.803258@1] fb: osd[0] canvas.addr=0xe8800000 [ 1.803259@1] fb: osd[0] canvas.width=7680 [ 1.803261@1] fb: osd[0] canvas.height=2160 [ 1.803262@1] fb: osd[0] frame.width=1920 [ 1.803264@1] fb: osd[0] frame.height=1080 [ 1.803265@1] fb: osd[0] out_addr_id =0x1 [ 1.819924@1] fb: osd_release now.index=0,open_count=1 [ 1.821558@0] fb: malloc_osd_memory, cma:ffffff800abc7670 [ 1.821564@0] fb: malloc_osd_memory, 1283, base:0x0000000077800000, size:8388608 [ 1.821566@0] fb: use ion buffer for fb memory, fb_index=1 [ 1.821990@0] meson-fb meson-fb: create ion_client ffffffc0ac61a240, handle=ffffffc0cdb28e80 [ 1.821993@0] meson-fb meson-fb: ion memory(1): created fb at 0x00000000ed400000, size 1 MiB [ 1.821995@0] fb: Frame buffer memory assigned at [ 1.821998@0] fb: 1, phy: 0x00000000ed400000, vir:0xffffff8008ef5000, size=1024K [ 1.821998@0] [ 1.822001@0] fb: logo_index=0,fb_index=1 [ 1.822003@0] fb: ---------------clear fb1 memory ffffff8008ef5000 [ 1.822288@0] fb: osd[1] canvas.idx =0x43 [ 1.822289@0] fb: osd[1] canvas.addr=0xed400000 [ 1.822291@0] fb: osd[1] canvas.width=128 [ 1.822292@0] fb: osd[1] canvas.height=32 [ 1.822294@0] fb: osd[1] frame.width=32 [ 1.822295@0] fb: osd[1] frame.height=32 [ 1.822296@0] fb: osd[1] out_addr_id =0x2 [ 1.836554@0] fb: osd_release now.index=1,open_count=1 [ 1.853255@0] vfm_map_store:rm default [ 1.853255@0] [ 1.853316@0] vfm_map_store:add default decoder ppmgr deinterlace amvideo [ 1.853316@0] [ 1.853375@0] fb: osd[0] enable: 1 (sh) [ 1.869749@0] fb: osd[1] enable: 0 (sh) [ 1.898075@1] font: no symbol version for module_layout [ 1.903084@1] Console: switching to colour frame buffer device 240x67 [ 1.926893@0] Checking disk(s): LABEL=COREELEC LABEL=STORAGE [ 4.500876@0] fsck: CP437: Invalid argument [ 4.500876@0] fsck: fsck.fat 3.0.28 (2015-05-16) [ 4.500876@0] fsck: /dev/mmcblk1p1: 34 files, 25801/65501 clusters [ 4.500876@0] fsck: STORAGE: recovering journal [ 4.500876@0] fsck: STORAGE: Superblock last mount time (Mon Dec 2 14:56:41 2019, [ 4.500876@0] fsck: now = Thu Jan 1 00:00:08 2015) is in the future. [ 4.500876@0] fsck: FIXED. [ 4.500876@0] fsck: STORAGE: 10843/7555072 files (0.5% non-contiguous), 2104689/30216192 blocks [ 4.871889@1] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 5.029823@1] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.477703@1] systemd[1]: System time before build time, advancing clock. [ 5.506454@1] cgroup: cgroup2: unknown option "nsdelegate" [ 5.511872@1] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 5.512350@1] systemd[1]: Detected architecture arm64. [ 5.516182@1] systemd[1]: Set hostname to . [ 5.557144@2] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 5.557154@2] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 5.605746@2] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. [ 5.605785@2] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. [ 5.658699@2] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.658916@2] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 5.659396@2] systemd[1]: Listening on Journal Audit Socket. [ 5.715230@2] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200 [ 5.753327@1] kernel-overlays-setup: setup base modules [ 5.870105@1] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.9.190 [ 5.910943@3] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware [ 5.911077@3] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays [ 5.912176@3] kernel-overlays-setup: done [ 6.064607@1] media: Linux media interface: v0.10 [ 6.092412@1] Linux video capture interface: v2.00 [ 6.131557@1] amlvid:info: amlvideo_init called [ 6.131562@1] amlvid:info: amlvideo_create_instance called [ 6.131567@1] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 6.131867@2] amlvideo-000: V4L2 device registered as video10 [ 6.137192@2] wifi_dummy: loading out-of-tree module taints kernel. [ 6.137497@2] Triggered SDIO WiFi power on and bus rescan. [ 6.137522@2] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 482 [ 6.151611@1] systemd-journald[2414]: Received request to flush runtime journal from PID 1 [ 6.456067@1] NET: Registered protocol family 10 [ 6.468717@2] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 482 [ 6.789762@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff [ 6.789769@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8 [ 6.789788@2] meson-mmc: meson_mmc_irq_thread_v3 600 sdio: cmd:52 [ 6.790911@0] meson-mmc: sdio: resp_timeout,vstat:0x9dff0800,virqc:3fff [ 6.790912@0] meson-mmc: sdio: err: wait for desc write back, bus_fsm:0x7 [ 6.790919@2] meson-mmc: meson_mmc_irq_thread_v3 600 sdio: cmd:52 [ 6.795644@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff [ 6.795649@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8 [ 6.795667@2] meson-mmc: meson_mmc_irq_thread_v3 600 sdio: cmd:8 [ 6.798758@2] meson-mmc: actual_clock :0, HHI_nand: 0x80 [ 6.798763@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c [ 6.816696@2] meson-mmc: actual_clock :400000, HHI_nand: 0x80 [ 6.816703@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c [ 6.837675@2] sdio: queuing unknown CIS tuple 0x80 (2 bytes) [ 6.841032@2] sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 6.844232@2] sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 6.850118@2] sdio: queuing unknown CIS tuple 0x80 (7 bytes) [ 6.857170@2] sdio: queuing unknown CIS tuple 0x81 (9 bytes) [ 6.977339@2] meson-aml-mmc ffe05000.sd2: divider requested rate 200000000 != actual rate 199999997: ret=0 [ 6.977347@2] meson-mmc: actual_clock :199999997, HHI_nand: 0x80 [ 6.977349@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245 [ 6.977353@2] meson-mmc: Data 1 aligned delay is 0 [ 6.977355@2] meson-mmc: sdio: clk 199999997 tuning start [ 6.977383@2] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac [ 6.978126@2] meson-mmc: sdio: rx_tuning_result[1] = 40 [ 6.978844@2] meson-mmc: sdio: rx_tuning_result[2] = 40 [ 6.979560@2] meson-mmc: sdio: rx_tuning_result[3] = 40 [ 6.980275@2] meson-mmc: sdio: rx_tuning_result[4] = 40 [ 6.980277@2] meson-mmc: sdio: best_win_start =1, best_win_size =4 [ 6.980280@2] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x32000 [ 6.983843@2] sdio: new ultra high speed SDR104 SDIO card at address 0001 [ 6.983849@3] sdio: clock 199999997, 4-bit-bus-width [ 6.983849@3] [ 6.984226@3] meson-mmc: [sdio_reinit] finish [ 7.463646@1] fb: osd_release now.index=0,open_count=1 [ 7.463698@1] Console: switching to colour dummy device 80x25 [ 7.572256@0] meson-remote ff808040.meson-remote: add custom_code 0x0000FF00 to ir map table [ 7.833352@3] decoder registered as /dev/video26 [ 8.051623@0] [0] vcodec_dec decoder [ 8.051782@0] [0] release decoder [ 8.184705@2] dhd_module_init: in [ 8.184724@2] ======== bcm_wlan_set_plat_data ======== [ 8.184727@2] host_oob_irq: 52 [ 8.184729@2] host_oob_irq_flags=0x418 [ 8.184731@2] dhd_wifi_platform_load: Enter [ 8.184759@2] Power-up adapter 'DHD generic adapter' [ 8.184761@2] wifi_platform_set_power = 1 [ 8.184763@2] ======== PULL WL_REG_ON HIGH! ======== [ 8.184781@2] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 482 [ 8.400951@2] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 482 [ 8.417263@1] set mac for wol = d0:5f:64:d0:1a:ec [ 8.429183@1] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP. [ 8.429641@1] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.908652@2] wifi_platform_bus_enumerate device present 1 [ 8.908657@2] ======== Card detection to detect SDIO card! ======== [ 8.908660@2] sdio_reset_comm(): [ 8.908698@2] meson-aml-mmc ffe05000.sd2: divider requested rate 200000000 != actual rate 199999997: ret=0 [ 8.908700@2] meson-mmc: actual_clock :199999997, HHI_nand: 0x80 [ 8.908702@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245 [ 8.910816@2] meson-aml-mmc ffe05000.sd2: divider requested rate 200000000 != actual rate 199999997: ret=0 [ 8.910819@2] meson-mmc: actual_clock :199999997, HHI_nand: 0x80 [ 8.910820@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245 [ 8.911863@2] meson-mmc: actual_clock :400000, HHI_nand: 0x80 [ 8.911864@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c [ 8.914768@2] meson-mmc: actual_clock :0, HHI_nand: 0x80 [ 8.914773@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c [ 8.932687@2] meson-mmc: actual_clock :400000, HHI_nand: 0x80 [ 8.932692@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c [ 8.953404@2] sdio: queuing unknown CIS tuple 0x80 (2 bytes) [ 8.956596@2] sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 8.959794@2] sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 8.965534@2] sdio: queuing unknown CIS tuple 0x80 (7 bytes) [ 8.972551@2] sdio: queuing unknown CIS tuple 0x81 (9 bytes) [ 9.079152@2] meson-aml-mmc ffe05000.sd2: divider requested rate 200000000 != actual rate 199999997: ret=0 [ 9.079156@2] meson-mmc: actual_clock :199999997, HHI_nand: 0x80 [ 9.079158@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245 [ 9.079161@2] meson-mmc: Data 1 aligned delay is 0 [ 9.079163@2] meson-mmc: sdio: clk 199999997 tuning start [ 9.079190@2] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac [ 9.079911@2] meson-mmc: sdio: rx_tuning_result[1] = 40 [ 9.080625@2] meson-mmc: sdio: rx_tuning_result[2] = 40 [ 9.081448@2] meson-mmc: sdio: rx_tuning_result[3] = 40 [ 9.082181@2] meson-mmc: sdio: rx_tuning_result[4] = 40 [ 9.082184@2] meson-mmc: sdio: best_win_start =1, best_win_size =4 [ 9.082187@2] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x32000 [ 9.082192@2] meson-mmc: [sdio_reinit] finish [ 9.098621@2] bcmsdh_register: register client driver [ 9.098781@2] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter [ 9.098874@2] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter [ 9.098877@2] bus num (host idx)=2, slot num (rca)=1 [ 9.098880@2] found adapter info 'DHD generic adapter' [ 9.098963@2] sdioh_attach: set sd_f2_blocksize 256 [ 9.099332@2] dhdsdio_probe : no mutex held. set lock [ 9.099439@2] F1 signature read @0x18000000=0x15264345 [ 9.102285@2] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x6 pkg:0x2 [ 9.102820@2] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000 [ 9.102882@2] wifi_platform_get_mac_addr [ 9.102884@2] ======== bcm_wlan_get_mac_address ======== [ 9.102885@2] custom wifi mac is not set [ 9.102892@2] dhd_conf_set_chiprev: chip=0x4345, chiprev=6 [ 9.102921@2] dhd_conf_set_conf_path_by_nv_path: config_path=/usr/lib/firmware/brcm/config.txt [ 9.103091@2] dhd_os_open_image: /usr/lib/firmware/brcm/config.txt (425 bytes) open success [ 9.126363@2] dhd_conf_read_nv_by_chip: nv_by_chip_count=13 [ 9.126371@2] dhd_conf_read_nv_by_chip: chip=0xa962, chiprev=0, name=nvram_ap6181.txt [ 9.126373@2] dhd_conf_read_nv_by_chip: chip=0xa962, chiprev=1, name=nvram_ap6210.txt [ 9.126375@2] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=0, name=nvram_ap6212.txt [ 9.126377@2] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=1, name=nvram_ap6212a.txt [ 9.126380@2] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=2, name=nvram_ap6236.txt [ 9.126382@2] dhd_conf_read_nv_by_chip: chip=0x4345, chiprev=6, name=nvram_ap6255.txt [ 9.126384@2] dhd_conf_read_nv_by_chip: chip=0x4330, chiprev=4, name=nvram_ap6330.txt [ 9.126387@2] dhd_conf_read_nv_by_chip: chip=0x4339, chiprev=1, name=nvram_ap6335.txt [ 9.126389@2] dhd_conf_read_nv_by_chip: chip=0x4354, chiprev=2, name=nvram_ap6356.txt [ 9.126391@2] dhd_conf_read_nv_by_chip: chip=0x4335, chiprev=1, name=nvram_bcm4335.txt [ 9.126393@2] dhd_conf_read_nv_by_chip: chip=0xa94c, chiprev=2, name=nvram_ap6234.txt [ 9.126395@2] dhd_conf_read_nv_by_chip: chip=0x4359, chiprev=9, name=nvram_ap6359s.txt [ 9.126397@2] dhd_conf_read_nv_by_chip: chip=0x4334, chiprev=3, name=nvram_bcm4334.txt [ 9.126454@2] dhd_conf_read_config: mimo_bw_cap = 1 [ 9.126732@2] dhd_conf_read_config: bcn_timeout = 20 [ 9.126831@2] dhd_conf_read_config: kso_enable = 0 [ 9.127117@2] dhd_conf_read_config: PM = 0 [ 9.129006@2] wl_create_event_handler(): thread:wl_event_handler:f98 started [ 9.129010@1] tsk Enter, tsk = 0xffffffc0c9a41a90 [ 9.129816@2] dhd_attach(): thread:dhd_watchdog_thread:f9c started [ 9.129860@2] dhd_attach(): thread:dhd_dpc:f9d started [ 9.129919@2] dhd_attach(): thread:dhd_rxf:f9e started [ 9.129928@2] dhd_deferred_work_init: work queue initialized [ 9.139933@2] Dongle Host Driver, version 1.363.59.144.2.git (r) [ 9.140628@2] Register interface [wlan0] MAC: c0:84:7d:4b:5d:df [ 9.140628@2] [ 9.140674@1] wl_event_handler: was terminated [ 9.140687@2] wl_destroy_event_handler(): thread:wl_event_handler:f98 terminated OK [ 9.140695@2] dhd_wl_ioctl: returning as busstate=0 [ 9.140771@2] bcmsdh_oob_intr_unregister: Enter [ 9.140773@2] bcmsdh_oob_intr_unregister: irq is not registered [ 9.140780@2] dhd_txglom_enable: enable 0 [ 9.140782@2] dhd_conf_set_txglom_params: swtxglom=0, txglom_ext=0 [ 9.140784@2] dhd_conf_set_txglom_params: txglom_bucket_size=0 [ 9.140786@2] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0, bus_txglom=-1 [ 9.140788@2] dhd_conf_set_txglom_params: tx_in_rx=1, tx_max_offset=0 [ 9.140790@2] sdioh_set_mode: set txglom_mode to multi-desc [ 9.140792@2] dhd_bus_devreset: WLAN OFF DONE [ 9.140858@1] wifi_platform_set_power = 0 [ 9.140861@1] ======== PULL WL_REG_ON LOW! ======== [ 9.140864@1] dhdsdio_probe : the lock is released. [ 9.141008@1] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter [ 9.141075@1] dhd_module_init: Exit err=0 [ 9.249089@2] BT_RADIO going: on [ 9.249094@2] AML_BT: going ON [ 9.693006@0] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600 [ 9.693052@0] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 9600 [ 9.693065@0] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200 [ 11.492651@1] vout: aml_tvout_mode_work: monitor_timeout [ 12.516950@1] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 12.516976@1] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 12.576575@1] 8021q: 802.1Q VLAN Support v1.8 [ 12.764520@2] FS-Cache: Loaded [ 12.814938@2] FS-Cache: Netfs 'cifs' registered for caching [ 12.817723@2] Key type cifs.spnego registered [ 12.817735@2] Key type cifs.idmap registered [ 13.671430@0] input: VNCServer SimKey as /devices/virtual/input/input3 [ 14.577969@3] dhd_ioctl_entry: Interface is down [ 14.621099@2] dhd_ioctl_entry: Interface is down [ 14.621306@2] dhd_ioctl_entry: Interface is down [ 15.300914@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 115200 to 2000000 [ 15.358847@3] Bluetooth: Core ver 2.22 [ 15.358854@3] Bluetooth: Starting self testing [ 15.374014@3] Bluetooth: ECDH test passed in 14794 usecs [ 15.380053@3] Bluetooth: SMP test passed in 25 usecs [ 15.380077@3] Bluetooth: Finished self testing [ 15.380160@3] NET: Registered protocol family 31 [ 15.380162@3] Bluetooth: HCI device and connection manager initialized [ 15.380175@3] Bluetooth: HCI socket layer initialized [ 15.380185@3] Bluetooth: L2CAP socket layer initialized [ 15.380204@3] Bluetooth: SCO socket layer initialized [ 15.428207@3] Bluetooth: HCI UART driver ver 2.3 [ 15.428215@3] Bluetooth: HCI UART protocol H4 registered [ 15.428217@3] Bluetooth: HCI UART protocol BCSP registered [ 15.428218@3] Bluetooth: HCI UART protocol LL registered [ 15.428220@3] Bluetooth: HCI UART protocol ATH3K registered [ 15.428221@3] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 15.428432@3] Bluetooth: HCI UART protocol Intel registered [ 15.428536@3] Bluetooth: HCI UART protocol Broadcom registered [ 15.428539@3] Bluetooth: HCI UART protocol QCA registered [ 15.428541@3] Bluetooth: HCI UART protocol AG6XX registered [ 15.428543@3] Bluetooth: HCI UART protocol Marvell registered [ 16.035184@1] the demux clock on, ref cnt: 1 [ 16.035193@1] the parser_top clock on, ref cnt: 1 [ 16.035196@1] the vdec clock on, ref cnt: 1 [ 16.035215@1] the clk_hevc_mux clock on, ref cnt: 1 [ 16.035218@1] the clk_hevcb_mux clock on, ref cnt: 1 [ 16.035295@1] hevc mux clock is 499999992 Hz [ 16.035319@1] hevc back mux clock is 499999992 Hz [ 16.035345@1] the clk_vdec_mux clock on, ref cnt: 1 [ 16.035368@1] vdec mux clock is 499999992 Hz [ 16.035431@1] vdec_create instance ffffff80100fc000, total 1 [ 16.035441@1] vdec_release instance ffffff80100fc000, total 1 [ 16.035456@1] the clk_hevc_mux clock off, ref cnt: 0 [ 16.035459@1] the clk_hevcb_mux clock off, ref cnt: 0 [ 16.035473@1] the clk_vdec_mux clock off, ref cnt: 0 [ 16.035475@1] the vdec clock off, ref cnt: 0 [ 16.035477@1] the parser_top clock off, ref cnt: 0 [ 16.035480@1] the demux clock off, ref cnt: 0 [ 16.550116@0] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb [ 16.551364@0] tdm playback mute: 1, lane_cnt = 4 [ 16.551414@0] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb [ 16.551946@0] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb [ 16.553209@0] tdm playback mute: 1, lane_cnt = 4 [ 16.553267@0] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb [ 16.553861@0] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmc [ 16.554151@0] tdm playback mute: 1, lane_cnt = 4 [ 16.554200@0] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmc [ 16.554794@0] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmc [ 16.555091@0] tdm playback mute: 1, lane_cnt = 4 [ 16.555141@0] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmc [ 16.555730@0] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmc [ 16.556011@0] tdm playback mute: 1, lane_cnt = 4 [ 16.556049@0] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmc [ 16.573195@0] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb [ 16.574548@0] tdm playback mute: 1, lane_cnt = 4 [ 16.574607@0] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb [ 16.575155@0] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmc [ 16.576185@0] tdm playback mute: 1, lane_cnt = 4 [ 16.576222@0] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmc [ 16.576776@0] spdif_a keep clk continuous [ 16.576781@0] aml_spdif_open [ 16.576884@0] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif [ 16.577339@0] spdif_a keep clk continuous [ 16.577345@0] aml_spdif_close [ 16.577394@0] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif [ 16.577901@0] spdif_b keep clk continuous [ 16.577905@0] aml_spdif_open [ 16.578012@0] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif_b [ 16.579033@0] spdif_b keep clk continuous [ 16.579039@0] aml_spdif_close [ 16.579093@0] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif_b [ 16.586135@1] audio_dsp: buf=0 [ 16.586142@1] audio_dsp: IEC958_mode_raw=0 [ 16.586175@1] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM [ 16.586177@1] audio_dsp: last mode 0,now 0 [ 16.590658@1] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb [ 16.592022@1] set mclk:11289600, mpll:22579200, get mclk:11289593, mpll:22579186 [ 16.592029@1] asoc aml_dai_set_tdm_fmt, 0x4011, ffffffc0cdad6318, id(1), clksel(1) [ 16.592031@1] aml_dai_set_tdm_fmt(), fmt not change [ 16.592036@1] dump_pcm_setting(ffffffc0cdad6318) [ 16.592037@1] pcm_mode(1) [ 16.592038@1] sysclk(11289600) [ 16.592040@1] sysclk_bclk_ratio(4) [ 16.592041@1] bclk(2822400) [ 16.592042@1] bclk_lrclk_ratio(64) [ 16.592043@1] lrclk(44100) [ 16.592045@1] tx_mask(0x3) [ 16.592046@1] rx_mask(0x3) [ 16.592047@1] slots(2) [ 16.592048@1] slot_width(32) [ 16.592049@1] lane_mask_in(0x2) [ 16.592051@1] lane_mask_out(0x1) [ 16.592052@1] lane_oe_mask_in(0x0) [ 16.592053@1] lane_oe_mask_out(0x0) [ 16.592054@1] lane_lb_mask_in(0x0) [ 16.592056@1] aml_dai_set_tdm_sysclk(), mpll no change, keep clk [ 16.592057@1] aml_dai_set_tdm_sysclk(), mclk no change, keep clk [ 16.592059@1] set mclk:11289600, mpll:22579200, get mclk:11289593, mpll:22579186 [ 16.592061@1] aml_dai_set_clkdiv, div 4, clksel(1) [ 16.592069@1] aml_dai_set_bclk_ratio, select I2S mode [ 16.592073@1] mclk is not configured [ 16.592077@1] samesource sysclk:22579200 [ 16.592177@1] spdif_a fifo ctrl, frddr:0 type:4, 24 bits, chmask 0x3, swap 0x10 [ 16.592182@1] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 16.592188@1] hdmitx: hw: set audio [ 16.592190@1] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0 [ 16.592203@1] hdmitx: fs = 2, cd = 4, tmds_clk = 148352 [ 16.592205@1] hdmitx: hw: aud_n_para = 8918 [ 16.592212@1] hdmitx: hw: set channel status [ 16.592240@1] hdmitx: audio: Audio Type: PCM [ 16.592241@1] hdmitx: audio: set audio param [ 16.592244@1] audio_ddr_mngr: frddr_set_sharebuffer_enable sel:1, dst_src:3 [ 16.616779@1] tdm playback mute: 0, lane_cnt = 4 [ 16.616884@1] spdif_a fifo ctrl, frddr:0 type:4, 24 bits, chmask 0x3, swap 0x10 [ 16.616891@1] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0 [ 16.616897@1] audio_ddr_mngr: frddr_set_sharebuffer_enable sel:1, dst_src:3 [ 16.616961@1] tdm playback mute: 0, lane_cnt = 4 [ 16.618425@1] audio_ddr_mngr: frddr_set_sharebuffer_enable sel:1, dst_src:3 [ 16.618455@1] tdm playback mute: 1, lane_cnt = 4 [ 16.618518@1] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb [ 16.684021@1] fb: malloc_osd_memory, cma:ffffff800abc7670 [ 16.684030@1] fb: malloc_osd_memory, 1283, base:0x0000000077800000, size:8388608 [ 16.684032@1] fb: use ion buffer for fb memory, fb_index=2 [ 16.689609@1] meson-fb meson-fb: create ion_client ffffffc0ac61a240, handle=ffffffc0ca1afdc0 [ 16.689617@1] meson-fb meson-fb: ion memory(2): created fb at 0x00000000ed500000, size 1 MiB [ 16.689620@1] fb: Frame buffer memory assigned at [ 16.689624@1] fb: 2, phy: 0x00000000ed500000, vir:0xffffff8010146000, size=1024K [ 16.689624@1] [ 16.689627@1] fb: logo_index=0,fb_index=2 [ 16.689629@1] fb: ---------------clear fb2 memory ffffff8010146000 [ 16.689921@1] fb: osd[2] canvas.idx =0x41 [ 16.689923@1] fb: osd[2] canvas.addr=0xed500000 [ 16.689924@1] fb: osd[2] canvas.width=128 [ 16.689926@1] fb: osd[2] canvas.height=32 [ 16.689927@1] fb: osd[2] frame.width=32 [ 16.689929@1] fb: osd[2] frame.height=32 [ 16.689930@1] fb: osd[2] out_addr_id =0x3 [ 16.701372@1] fb: vpu clkc clock is 199 MHZ [ 16.701381@1] vpu: switch_vpu_mem_pd: unsupport vpu mod: 53 [ 16.701388@1] fb: malloc_osd_memory, cma:ffffff800abc7670 [ 16.701391@1] fb: malloc_osd_memory, 1283, base:0x0000000077800000, size:8388608 [ 16.701393@1] fb: use ion buffer for fb memory, fb_index=3 [ 16.707823@1] meson-fb meson-fb: create ion_client ffffffc0ac61a240, handle=ffffffc0ca1aff00 [ 16.707830@1] meson-fb meson-fb: ion memory(3): created fb at 0x00000000ed600000, size 8 MiB [ 16.707834@1] fb: Frame buffer memory assigned at [ 16.707836@1] fb: 3, phy: 0x00000000ed600000, vir:0xffffff8010247000, size=8192K [ 16.707836@1] [ 16.707839@1] fb: logo_index=0,fb_index=3 [ 16.707841@1] fb: ---------------clear fb3 memory ffffff8010247000 [ 16.710371@1] fb: osd[3] canvas.idx =0x42 [ 16.710374@1] fb: osd[3] canvas.addr=0xed600000 [ 16.710376@1] fb: osd[3] canvas.width=128 [ 16.710378@1] fb: osd[3] canvas.height=32 [ 16.710379@1] fb: osd[3] frame.width=32 [ 16.710380@1] fb: osd[3] frame.height=32 [ 16.710382@1] fb: osd[3] out_addr_id =0x4 [ 16.721339@1] hdmitx: system: set frac_rate_policy as 0 [ 16.721364@1] vout: vmode set to 1080p50hz [ 16.721444@1] fb: current vmode=1080p50hz, cmd: 0x10000 [ 16.721448@1] vlock: event MODE_CHANGE_PRE 0 [ 16.721457@1] hdmitx: hdmitx_set_current_vmode[3680] [ 16.721459@1] hdmitx: system: recalc before 1080p50hz 50 1 [ 16.721463@1] hdmitx: system: recalc after 1080p50hz 50 1 [ 16.721468@1] hdmitx: system: get current mode: 1080p50hz [ 16.721470@1] hdmitx: system: update rx hdr info 0 [ 16.721473@1] hdmitx: system: update physcial size: 1110 620 [ 16.721509@1] hdmitx: video: already init VIC = 0 Now VIC = 31 [ 16.721513@1] hdmitx: hw: div40: 0 [ 16.750654@1] hdmitx: ddc w1b error 0x54 0x20 0x00 [ 16.750663@1] hdmitx: this mode doesn't have frac_rate [ 16.750664@1] hdmitx: frac_rate = 0 [ 16.750666@1] hdmitx: hdmitx: set clk: VIC = 31 cd = 4 cs = 2 frac_rate = 0 [ 16.750671@1] hdmitx: config HPLL = 5940000 frac_rate = 0 [ 16.750725@1] hdmitx: HPLLv1: 0xdb3a04f7 [ 16.750726@1] hdmitx: config HPLL done [ 16.750732@1] hdmitx: set_hpll_od3_clk_div[610] div = 6 [ 16.750736@1] hdmitx: j = 4 vid_clk_div = 1 [ 16.750742@1] hdmitx: set enc for VIC: 31 [ 16.753755@1] hdmitx: hw: config hdmitx IP vic = 31 cd:4 cs: 2 [ 16.884668@1] hdmitx: video: Sink is HDMI device [ 16.884691@1] hdmitx: hw: set audio [ 16.884699@1] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0 [ 16.884711@1] hdmitx: fs = 2, cd = 4, tmds_clk = 148500 [ 16.884713@1] hdmitx: hw: aud_n_para = 6272 [ 16.884720@1] hdmitx: hw: set channel status [ 16.884747@1] hdmitx: audio: Audio Type: PCM [ 16.884752@1] vout: new mode 1080p50hz set ok [ 16.884756@1] fb: current vmode=1080p50hz, cmd: 0x20000 [ 16.884764@1] fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079) [ 16.884766@1] fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079) [ 16.903877@1] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 16.903879@1] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31) [ 16.923869@1] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 16.923870@1] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31) [ 16.943885@1] vlock: event MODE_CHANGE [ 17.458149@1] vout: vmode set to null [ 17.458228@1] fb: current vmode=1080p50hz, cmd: 0x10000 [ 17.458232@1] vlock: event MODE_CHANGE_PRE 0 [ 17.458280@1] vout: new mode null set ok [ 17.458282@1] fb: current vmode=null, cmd: 0x20000 [ 17.458362@1] hdmitx: system: set frac_rate_policy as 0 [ 17.458383@1] vout: vmode set to 1080p50hz [ 17.458412@1] fb: current vmode=null, cmd: 0x10000 [ 17.458418@1] hdmitx: hdmitx_set_current_vmode[3680] [ 17.458420@1] hdmitx: system: recalc before 1080p50hz 50 1 [ 17.458423@1] hdmitx: system: recalc after 1080p50hz 50 1 [ 17.458431@1] hdmitx: hdmitx: display colourdepth was 8 in cur_param 0xffffff800aa63428 (VIC: 31) [ 17.458432@1] hdmitx: system: get current mode: 1080p50hz [ 17.458435@1] hdmitx: system: update rx hdr info 0 [ 17.458437@1] hdmitx: system: update physcial size: 1110 620 [ 17.458445@1] hdmitx: hdmitx: display colourdepth is 10 in cur_param 0xffffff800aa63428 (VIC: 31) [ 17.458468@1] hdmitx: video: already init VIC = 0 Now VIC = 31 [ 17.458471@1] hdmitx: hw: div40: 0 [ 17.484868@0] hdmitx: system: irq 80000001 0 [ 17.486654@1] hdmitx: ddc w1b error 0x54 0x20 0x00 [ 17.486661@1] hdmitx: this mode doesn't have frac_rate [ 17.486663@1] hdmitx: frac_rate = 0 [ 17.486665@1] hdmitx: hdmitx: set clk: VIC = 31 cd = 5 cs = 2 frac_rate = 0 [ 17.486670@1] hdmitx: config HPLL = 3712500 frac_rate = 0 [ 17.486724@1] hdmitx: HPLL: 0xdb00049a [ 17.486725@1] hdmitx: config HPLL done [ 17.486730@1] hdmitx: set_hpll_od3_clk_div[610] div = 8 [ 17.486735@1] hdmitx: j = 4 vid_clk_div = 1 [ 17.486740@1] hdmitx: set enc for VIC: 31 [ 17.486758@0] hdmitx: system: irq 80000001 0 [ 17.489752@1] hdmitx: hw: config hdmitx IP vic = 31 cd:5 cs: 2 [ 17.588669@1] hdmitx: [0x10000104]: 0x00000001 [ 17.588676@1] hdmitx: [0x10000180]: 0x000000ff [ 17.588678@1] hdmitx: [0x10000181]: 0x000000ff [ 17.588680@1] hdmitx: [0x10000182]: 0x00000003 [ 17.588682@1] hdmitx: [0x10000183]: 0x00000007 [ 17.588683@1] hdmitx: [0x10000184]: 0x0000003f [ 17.588685@1] hdmitx: [0x10000185]: 0x00000002 [ 17.588687@1] hdmitx: [0x10000187]: 0x000000ff [ 17.588689@1] hdmitx: [0x10000188]: 0x00000003 [ 17.620656@1] hdmitx: video: Sink is HDMI device [ 17.620679@1] hdmitx: hw: set audio [ 17.620685@1] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0 [ 17.620697@1] hdmitx: fs = 2, cd = 4, tmds_clk = 148500 [ 17.620699@1] hdmitx: hw: aud_n_para = 6272 [ 17.620707@1] hdmitx: hw: set channel status [ 17.620734@1] hdmitx: audio: Audio Type: PCM [ 17.620738@1] vout: new mode 1080p50hz set ok [ 17.620743@1] fb: current vmode=1080p50hz, cmd: 0x20000 [ 17.620751@1] fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079) [ 17.620752@1] fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079) [ 17.639915@1] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 17.639917@1] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31) [ 17.659891@1] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 17.659892@1] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31) [ 17.679909@1] vlock: event MODE_CHANGE [ 20.633136@3] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.633142@3] Bluetooth: BNEP filters: protocol multicast [ 20.633157@3] Bluetooth: BNEP socket layer initialized [ 62.468660@0] fb: mem_free_work, free memory: addr:800000