[ 0.000000@0] Booting Linux on physical CPU 0x0 [ 0.000000@0] Linux version 4.9.190 (adamg@zulu) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) ) #1 SMP PREEMPT Wed Nov 27 07:28:48 GMT 2019 [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034] [ 0.000000@0] Machine model: Hardkernel ODROID-N2 [ 0.000000@0] efi: Getting EFI parameters from FDT: [ 0.000000@0] efi: UEFI not found. [ 0.000000@0] OF: reserved mem: __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB [ 0.000000@0] Reserved memory: created CMA memory pool at 0x0000000005000000, size 4 MiB [ 0.000000@0] OF: reserved mem: initialized node linux,secmon, compatible id shared-dma-pool [ 0.000000@0] Reserved memory: created DMA memory pool at 0x00000000ed800000, size 0 MiB [ 0.000000@0] OF: reserved mem: initialized node linux,ppmgr, compatible id shared-dma-pool [ 0.000000@0] OF: reserved mem: __reserved_mem_alloc_size, start:0x0000000077800000, end:0x0000000078000000, len:8 MiB [ 0.000000@0] Reserved memory: created CMA memory pool at 0x0000000077800000, size 8 MiB [ 0.000000@0] OF: reserved mem: initialized node linux,meson-fb, compatible id shared-dma-pool [ 0.000000@0] Reserved memory: created CMA memory pool at 0x00000000e5800000, size 128 MiB [ 0.000000@0] OF: reserved mem: initialized node linux,ion-dev, compatible id shared-dma-pool [ 0.000000@0] Reserved memory: created CMA memory pool at 0x00000000e3000000, size 40 MiB [ 0.000000@0] OF: reserved mem: initialized node linux,di_cma, compatible id shared-dma-pool [ 0.000000@0] Reserved memory: created CMA memory pool at 0x00000000c0800000, size 308 MiB [ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_cma, compatible id shared-dma-pool [ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved [ 0.000000@0] OF: reserved mem: invalid size property in 'linux,galcore' node. [ 0.000000@0] cma: Reserved 8 MiB at 0x00000000e2800000 [ 0.000000@0] On node 0 totalpages: 972800 [ 0.000000@0] DMA zone: 15200 pages used for memmap [ 0.000000@0] DMA zone: 0 pages reserved [ 0.000000@0] DMA zone: 972800 pages, LIFO batch:31 [ 0.000000@0] psci: probing for conduit method from DT. [ 0.000000@0] psci: PSCIv1.0 detected in firmware. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000@0] psci: SMC Calling Convention v1.1 [ 0.000000@0] percpu: Embedded 22 pages/cpu s51992 r8192 d29928 u90112 [ 0.000000@0] pcpu-alloc: s51992 r8192 d29928 u90112 alloc=22*4096 [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000@0] Detected VIPT I-cache on CPU0 [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 957600 [ 0.000000@0] Kernel command line: BOOT_IMAGE=kernel.img boot=UUID=2911-4504 disk=UUID=d64f1eca-7a63-4904-9030-3446e096b23b console=ttyS0,115200 console=tty0 no_console_suspend max_freq_a53=1896 max_freq_a73=1800 enable_wol=1 remotewakeup=0x23dc4db2 decode_type=0 remotewakeupmask=0xffffffff hdmimode=1080p60hz logo=osd0,loaded,0x3d800000 quiet console=tty0 systemd.show_status=auto [ 0.000000@0] [get_max_freq_a53] - max_freq : 1896000 [ 0.000000@0] [get_max_freq_a73] - max_freq : 1800000 [ 0.000000@0] vout: get hdmimode: 1080p60hz [ 0.000000@0] fb: osd0 [ 0.000000@0] fb: loaded [ 0.000000@0] fb: 0x3d800000 [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000@0] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000@0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000@0] Memory: 3279940K/3891200K available (11516K kernel code, 1648K rwdata, 9188K rodata, 4800K init, 1696K bss, 103356K reserved, 507904K cma-reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009bc0000 ( 11520 KB) [ 0.000000@0] .rodata : 0xffffff8009bc0000 - 0xffffff800a4c0000 ( 9216 KB) [ 0.000000@0] .init : 0xffffff800a4c0000 - 0xffffff800a970000 ( 4800 KB) [ 0.000000@0] .data : 0xffffff800a970000 - 0xffffff800ab0c200 ( 1649 KB) [ 0.000000@0] .bss : 0xffffff800ab0c200 - 0xffffff800acb43bc ( 1697 KB) [ 0.000000@0] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf03b60000 ( 59 MB actual) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc0ed800000 ( 3800 MB) [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] Build-time adjustment of leaf fanout to 64. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] GPIO-INTC: support to detect double-edge trigger signal [ 0.000000@0] g12a_aoclkc_init: register ao clk ok! [ 0.000000@0] Meson chip version = RevA (29:A - 40:0) [ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk [ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk [ 0.000000@0] meson_g12a_gpu_init: register meson gpu clk [ 0.000000@0] meson_g12a_media_init: register meson media clk [ 0.000000@0] meson_g12a_misc_init: register amlogic g12a misc clks [ 0.000000@0] meson_g12a_misc_init: done. [ 0.000000@0] g12a_clkc_init initialization complete [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000035@0] meson_bc_timer: mclk->mux_reg =ffffff800800c190,mclk->reg =ffffff800800e194 [ 0.000610@0] Console: colour dummy device 80x25 [ 0.000639@0] console [tty0] enabled [ 0.000653@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.000660@0] pid_max: default: 32768 minimum: 301 [ 0.000751@0] Security Framework initialized [ 0.000756@0] SELinux: Initializing. [ 0.000788@0] SELinux: Starting in permissive mode [ 0.000816@0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.000822@0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.001446@0] ftrace: allocating 38033 entries in 149 pages [ 0.068155@0] sched-energy: Sched-energy-costs installed from DT [ 0.068163@0] CPU0: update cpu_capacity 631 [ 0.068172@0] ASID allocator initialised with 65536 entries [ 0.099933@0] EFI services will not be available. [ 0.148238@1] Detected VIPT I-cache on CPU1 [ 0.148283@1] CPU1: update cpu_capacity 631 [ 0.148286@1] CPU1: Booted secondary processor [410fd034] [ 0.180764@2] Detected VIPT I-cache on CPU2 [ 0.180805@2] CPU2: update cpu_capacity 920 [ 0.180808@2] CPU2: Booted secondary processor [410fd092] [ 0.212318@3] Detected VIPT I-cache on CPU3 [ 0.212341@3] CPU3: update cpu_capacity 920 [ 0.212343@3] CPU3: Booted secondary processor [410fd092] [ 0.244378@4] Detected VIPT I-cache on CPU4 [ 0.244400@4] CPU4: update cpu_capacity 920 [ 0.244402@4] CPU4: Booted secondary processor [410fd092] [ 0.276448@5] Detected VIPT I-cache on CPU5 [ 0.276469@5] CPU5: update cpu_capacity 920 [ 0.276472@5] CPU5: Booted secondary processor [410fd092] [ 0.276551@0] Brought up 6 CPUs [ 0.276557@0] SMP: Total of 6 processors activated. [ 0.276563@0] CPU features: detected feature: 32-bit EL0 Support [ 0.276680@0] CPU: All CPU(s) started at EL2 [ 0.276714@0] alternatives: patching kernel code [ 0.278188@0] devtmpfs: initialized [ 0.293400@0] DMI not present or invalid. [ 0.293685@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.293698@0] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.309015@0] pinctrl core: initialized pinctrl subsystem [ 0.309912@0] NET: Registered protocol family 16 [ 0.311236@0] schedtune: init normalization constants... [ 0.311246@0] schedtune: CLUSTER[0-1] min_pwr: 0 max_pwr: 42 [ 0.311250@0] schedtune: CPU[0] min_pwr: 0 max_pwr: 279 [ 0.311253@0] schedtune: CPU[1] min_pwr: 0 max_pwr: 279 [ 0.311256@0] schedtune: CLUSTER[2-5] min_pwr: 0 max_pwr: 64 [ 0.311259@0] schedtune: CPU[2] min_pwr: 0 max_pwr: 759 [ 0.311263@0] schedtune: CPU[3] min_pwr: 0 max_pwr: 759 [ 0.311266@0] schedtune: CPU[4] min_pwr: 0 max_pwr: 759 [ 0.311269@0] schedtune: CPU[5] min_pwr: 0 max_pwr: 759 [ 0.311272@0] schedtune: SYSTEM min_pwr: 0 max_pwr: 3700 [ 0.311275@0] schedtune: using normalization constants mul: 459677581 sh1: 1 sh2: 11 [ 0.311276@0] schedtune: verify normalization constants... [ 0.311279@0] schedtune: max_pwr/2^0: 3700 => norm_pwr: 1024 [ 0.311282@0] schedtune: max_pwr/2^1: 1850 => norm_pwr: 512 [ 0.311284@0] schedtune: max_pwr/2^2: 925 => norm_pwr: 256 [ 0.311286@0] schedtune: max_pwr/2^3: 462 => norm_pwr: 127 [ 0.311289@0] schedtune: max_pwr/2^4: 231 => norm_pwr: 63 [ 0.311291@0] schedtune: max_pwr/2^5: 115 => norm_pwr: 31 [ 0.311292@0] schedtune: configured to support global boosting only [ 0.328515@0] cpuidle: using governor menu [ 0.328614@0] register canvas platform driver [ 0.328639@0] register rdma platform driver [ 0.328662@0] aml_vdac_init: module init [ 0.329891@0] vdso: 2 pages (1 code @ ffffff8009bc7000, 1 data @ ffffff800a975000) [ 0.329906@0] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.331403@1] DMA: preallocated 2048 KiB pool for atomic allocations [ 0.331562@1] clkmsr: clkmsr: driver init [ 0.331564@1] codec_mm_module_init [ 0.331600@1] media_configs_system_init [ 0.331973@1] pstore: using zlib compression [ 0.332004@1] console [pstore-1] enabled [ 0.332007@1] pstore: Registered ramoops as persistent store backend [ 0.332011@1] ramoops: attached 0x100000@0x7400000, ecc: 0/0 [ 0.333491@1] aml_iomap: amlogic iomap probe done [ 0.333772@1] vpu: driver version: v20190329(8-g12b) [ 0.333778@1] vpu: load vpu_clk: 666666667Hz(7) [ 0.333954@1] vpu: clktree_init [ 0.333998@1] vpu: vpu_probe OK [ 0.338847@0] clkmsr: msr_clk_reg0=ffffff800837c004,msr_clk_reg2=ffffff800837e00c [ 0.338857@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0 [ 0.343031@0] aml_vdac_probe:probe start.cpu_id:6,name:meson-g12ab-vdac [ 0.343230@0] aml_vdac_probe: ok [ 0.343410@0] canvas_probe reg=00000000ff638000,size=2000 [ 0.343425@0] canvas maped reg_base =ffffff8008452000 [ 0.349697@0] rdma_probe,cpu_type:1, ver:0, len:8 [ 0.349970@0] rdma_register, rdma_table_addr ffffff8008475000 rdma_table_addr_phy e2a00000 reg_buf ffffffc0dd628000 [ 0.349975@0] rdma_register success, handle 1 table_size 32768 [ 0.349978@0] set_rdma_handle video rdma handle = 1. [ 0.350885@0] aml_snd_reg_map[0], reg:ff640000, size:2000 [ 0.350896@0] aml_snd_reg_map[1], reg:ff642000, size:2000 [ 0.350904@0] aml_snd_reg_map[2], reg:ff64a000, size:2000 [ 0.350912@0] aml_snd_reg_map[3], reg:ff656000, size:1800 [ 0.350925@0] aml_snd_reg_map[4], reg:ffd01000, size:1000 [ 0.350927@0] amlogic auge_snd_iomap probe done [ 0.353047@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma [ 0.353154@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma [ 0.353156@0] codec_mm_probe ok [ 0.354649@0] cvbs_out: cvbsout_probe, cpu_id:5,name:meson-g12b-cvbsout [ 0.354662@0] cvbs_out: clk path:0 [ 0.354666@0] cvbs_out: cvbs trimming.1.v5: 0xa0, 0x0 [ 0.354810@0] vout: vout1: register server: cvbs_vout_server [ 0.354812@0] cvbs_out: register cvbs module server ok [ 0.354815@0] vout: vout2: register server: cvbs_vout2_server [ 0.354816@0] cvbs_out: register cvbs module vout2 server ok [ 0.354821@0] cvbs_out: chrdev devno 264241152 for disp [ 0.355047@0] cvbs_out: create cdev cvbs [ 0.355050@0] cvbs_out: cvbsout_probe OK [ 0.486357@2] SCSI subsystem initialized [ 0.486510@2] usbcore: registered new interface driver usbfs [ 0.486548@2] usbcore: registered new interface driver hub [ 0.486604@2] usbcore: registered new device driver usb [ 0.486696@2] pps_core: LinuxPPS API ver. 1 registered [ 0.486699@2] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.486711@2] PTP clock support registered [ 0.486818@2] dmi: Firmware registration failed. [ 0.487067@2] secmon: reserve_mem_size:0x300000 [ 0.487136@2] secmon secmon: assigned reserved memory node linux,secmon [ 0.487140@2] secmon: clear_range:5100000 200000 [ 0.487323@2] secmon: get page:ffffffbf00140000, 5000 [ 0.487336@2] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000 [ 0.487338@2] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000 [ 0.487858@2] hdmitx: system: amhdmitx_probe start [ 0.487860@2] hdmitx: system: Ver: 20181019 [ 0.487883@2] hdmitx: system: hdmitx_device.chip_type : 11 [ 0.487906@2] hdmitx: system: not find product desc [ 0.487908@2] hdmitx: system: not find match pwr-ctl [ 0.487934@2] hdmitx: system: not find drm_amhdmitx [ 0.487951@2] hdmitx: system: hpd irq = 41 [ 0.488036@2] hdmitx: system: hdcp22_tx_skp failed to probe [ 0.488039@2] hdmitx: system: hdcp22_tx_esm failed to probe [ 0.488340@2] vout: vout1: register server: hdmitx_vout_server [ 0.488344@2] vout: vout2: register server: hdmitx_vout2_server [ 0.488649@2] hdmitx: hdmitx20: Mapped PHY: 0xffd00000 [ 0.488658@2] hdmitx: hdmitx20: Mapped PHY: 0xff634400 [ 0.488667@2] hdmitx: hdmitx20: Mapped PHY: 0xff900000 [ 0.488681@2] hdmitx: hdmitx20: Mapped PHY: 0xff800000 [ 0.488684@2] hdmitx: hdmitx20: Mapped PHY: 0xff63c000 [ 0.488687@2] hdmitx: hdmitx20: Mapped PHY: 0xffd00000 [ 0.488689@2] hdmitx: hdmitx20: Mapped PHY: 0xff608000 [ 0.488692@2] hdmitx: hdmitx20: Mapped PHY: 0xff600000 [ 0.488695@2] hdmitx: hdmitx20: Mapped PHY: 0xffe01000 [ 0.488702@2] hdmitx: hw: alread display in uboot 0x10 [ 0.488723@2] hdmitx: hw: avmute set to 1 [ 0.488776@2] hdmitx: system: amhdmitx_probe end [ 0.489274@2] vout: create vout attribute OK [ 0.489392@2] vout: vout_fops_create OK [ 0.489395@2] vout: vout1: register server: nulldisp_vout_server [ 0.489413@2] hdmitx: hdmitx_set_current_vmode[3680] [ 0.489415@2] hdmitx: system: recalc before 1080p60hz 60 1 [ 0.489419@2] hdmitx: system: recalc after 1080p60hz 2997 50 [ 0.489422@2] hdmitx: system: get current mode: 1080p60hz [ 0.489425@2] hdmitx: system: update rx hdr info 0 [ 0.489427@2] hdmitx: system: update physcial size: 16 9 [ 0.489440@2] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16 [ 0.489444@2] vout: init mode 1080p60hz set ok [ 0.489498@2] vout: aml_tvout_mode_monitor [ 0.489506@2] vout: aml_vout_probe OK [ 0.489637@2] chip type:0x29 [ 0.489925@2] Advanced Linux Sound Architecture Driver Initialized. [ 0.490498@2] NetLabel: Initializing [ 0.490501@2] NetLabel: domain hash size = 128 [ 0.490502@2] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.490537@2] NetLabel: unlabeled traffic allowed by default [ 0.491602@5] clocksource: Switched to clocksource arch_sys_counter [ 0.495815@0] hdmitx: system: irq 80000004 0 [ 0.515813@0] hdmitx: system: irq 80000002 0 [ 0.528727@5] VFS: Disk quotas dquot_6.6.0 [ 0.528772@5] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.534935@3] NET: Registered protocol family 2 [ 0.535331@3] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.535486@3] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.535713@3] TCP: Hash tables configured (established 32768 bind 32768) [ 0.535763@3] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.535793@3] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.535932@3] NET: Registered protocol family 1 [ 0.537453@3] Unpacking initramfs... [ 0.545233@2] Freeing initrd memory: 4712K [ 0.546132@2] hw perfevents: clusterb_enabled = 1 [ 0.546135@2] hw perfevents: cpumasks 0x3, 0x3c [ 0.546157@2] hw perfevents: cluster A irq = 18 [ 0.546180@2] hw perfevents: cluster B irq = 19 [ 0.546231@2] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.547850@2] audit: initializing netlink subsys (disabled) [ 0.547888@2] audit: type=2000 audit(0.500:1): initialized [ 0.548359@2] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.554032@2] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.554167@2] Registering sdcardfs 0.1 [ 0.554890@2] SELinux: Registering netfilter hooks [ 0.557336@2] NET: Registered protocol family 38 [ 0.557342@2] Key type asymmetric registered [ 0.557344@2] Asymmetric key parser 'x509' registered [ 0.557467@2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.557472@2] io scheduler noop registered (default) [ 0.557474@2] io scheduler deadline registered [ 0.557559@2] io scheduler cfq registered [ 0.557859@2] pwm-gpio pwmgpio: 1 gpio pwms loaded [ 0.558464@2] meson-pwm ff802000.pwm: pwm pinmux : can't get pinctrl [ 0.558677@2] meson-pwm ffd1b000.pwm: pwm pinmux : can't get pinctrl [ 0.559197@3] random: fast init done [ 0.559223@3] random: crng init done [ 0.559386@2] gpiomem-aml ff634000.gpiomem: Initialised: Registers at 0xff634000 [ 0.559455@2] [drm] Initialized [ 0.559511@2] mali ffe40000.bifrost: Continuing without Mali regulator control [ 0.559560@2] mali ffe40000.bifrost: max pp is 2 [ 0.559564@2] mali ffe40000.bifrost: set min pp to default 1 [ 0.559567@2] mali ffe40000.bifrost: min pp is 1 [ 0.559570@2] mali ffe40000.bifrost: min clk is 4 [ 0.559581@2] mali ffe40000.bifrost: hiu io source 0xffffff80084d8000 [ 0.559587@2] mali ffe40000.bifrost: hiu io source 0xffffff80084da000 [ 0.559612@2] mali ffe40000.bifrost: num of pp used most of time 1 [ 0.559616@2] mali ffe40000.bifrost: clock dvfs cfg table size is 6 [ 0.559636@2] mali ffe40000.bifrost: max clk set 4 [ 0.559639@2] mali ffe40000.bifrost: max clk is 4 [ 0.559642@2] mali ffe40000.bifrost: turbo clk set to 5 [ 0.559644@2] mali ffe40000.bifrost: turbo clk is 5 [ 0.559647@2] mali ffe40000.bifrost: default clk set to 4 [ 0.559650@2] mali ffe40000.bifrost: default clk is 4 [ 0.559656@2] mali ffe40000.bifrost: ====================0==================== [ 0.559656@2] clk_freq= 285714285, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 190>, clk_sample=285 [ 0.559661@2] mali ffe40000.bifrost: ====================1==================== [ 0.559661@2] clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=5, threshod=<152 207>, clk_sample=400 [ 0.559665@2] mali ffe40000.bifrost: ====================2==================== [ 0.559665@2] clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<180 220>, clk_sample=500 [ 0.559670@2] mali ffe40000.bifrost: ====================3==================== [ 0.559670@2] clk_freq= 666666666, clk_parent=fclk_div3, voltage=1150, keep_count=5, threshod=<210 236>, clk_sample=666 [ 0.559674@2] mali ffe40000.bifrost: ====================4==================== [ 0.559674@2] clk_freq= 800000000, clk_parent=fclk_div2p5, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=800 [ 0.559679@2] mali ffe40000.bifrost: ====================5==================== [ 0.559679@2] clk_freq= 800000000, clk_parent=fclk_div2p5, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=800 [ 0.559681@2] mali ffe40000.bifrost: clock dvfs table size is 6 [ 0.559756@2] mali_plat=ffffff800a9fbd90 [ 0.559845@2] meson_gcooldev is null, no set min status [ 0.559847@2] gpu cooling register okay with err=0 [ 0.559894@2] meson_gcooldev is null, no set min status [ 0.559896@2] gpu core cooling register okay with err=0 [ 0.559915@2] shader_present=3, tiler_present=1, l2_present=1 [ 0.560000@2] Mali_pwr_on:gpu_irq : 200 [ 0.560204@2] mali ffe40000.bifrost: GPU identified as 0x2 arch 7.2.1 r0p0 status 0 [ 0.560503@2] mali ffe40000.bifrost: Using coherency mode 0 set from dtb [ 0.561202@2] mali ffe40000.bifrost: Probed as mali0 [ 0.561433@2] Unable to detect cache hierarchy for CPU 0 [ 0.564693@2] loop: module loaded [ 0.564971@2] mtdoops: mtd device (mtddev=name/number) must be supplied [ 0.565288@2] libphy: Fixed MDIO Bus: probed [ 0.565798@2] REG0:Addr = ffffff80084de540 [ 0.565805@2] Not set cali_val for REG1 [ 0.566057@2] meson6-dwmac ff3f0000.ethernet: no reset control found [ 0.566060@2] stmmac - user ID: 0x11, Synopsys ID: 0x37 [ 0.566063@2] Ring mode enabled [ 0.566065@2] DMA HW capability register supported [ 0.566067@2] Normal descriptors [ 0.566068@2] RX Checksum Offload Engine supported [ 0.566070@2] COE Type 2 [ 0.566071@2] TX Checksum insertion supported [ 0.566072@2] Wake-Up On Lan supported [ 0.566097@2] eth%d: device MAC address 00:1e:06:42:45:a7 [ 0.566099@2] Enable RX Mitigation via HW Watchdog Timer [ 0.568371@2] libphy: stmmac: probed [ 0.568375@2] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active [ 0.568378@2] eth%d: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07) [ 0.569354@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.569357@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.569631@2] usbcore: registered new interface driver cdc_acm [ 0.569633@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.569668@2] usbcore: registered new interface driver usb-storage [ 0.569733@2] usbcore: registered new interface driver usbserial [ 0.569759@2] usbcore: registered new interface driver usbserial_generic [ 0.569782@2] usbserial: USB Serial support registered for generic [ 0.570009@2] mousedev: PS/2 mouse device common for all mice [ 0.570221@2] i2c /dev entries driver [ 0.571380@2] ledtrig-cpu: registered to indicate activity on CPUs [ 0.571619@2] hidraw: raw HID events driver (C) Jiri Kosina [ 0.571802@2] usbcore: registered new interface driver usbhid [ 0.571803@2] usbhid: USB HID core driver [ 0.572163@2] value of voltage_tolerance 0 [ 0.572700@2] dvfs [meson_cpufreq_init] - cluster 0 freq 1992000 [ 0.572710@2] cpu cpu0: meson_cpufreq_init: CPU 0 initialized [ 0.573521@2] value of voltage_tolerance 0 [ 0.574106@2] dvfs [meson_cpufreq_init] - cluster 1 freq 1908000 [ 0.574109@2] dvfs [meson_cpufreq_init] - cluster 1 freq 2004000 [ 0.574129@2] cpu cpu2: meson_cpufreq_init: CPU 2 initialized [ 0.574145@2] cpufreq: cpufreq_online: CPU2: Running at unlisted freq: 999999 KHz [ 0.575985@2] cpufreq: cpufreq_online: CPU2: Unlisted initial frequency changed to: 1000000 KHz [ 0.577717@2] ff803000.serial: clock gate not found [ 0.577751@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff80084f3000 [ 0.577771@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 33, base_baud = 1500000) is a meson_uart [ 0.577779@2] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200 [ 0.623312@2] console [ttyS0] enabled [ 0.623878@2] amlogic-new-usb2-v2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80084f5000 [ 0.624030@2] amlogic-new-usb3-v2 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80084fd080 [ 0.629111@2] rtc rtc0: invalid alarm value: 2020-3-20 24:4:0 [ 0.629175@2] rtc-pcf8563 3-0051: rtc core: registered rtc-pcf8563 as rtc0 [ 0.630753@2] gpio-keypad ff800000.gpio_keypad: failed to get gpio index from dts [ 0.632613@2] gpio-keypad: probe of ff800000.gpio_keypad failed with error -22 [ 0.632626@2] meson-remote: Driver init [ 0.632680@2] meson-remote: IR XMP protocol handler initialized [ 0.632816@2] efusekeynum: 1 [ 0.632828@2] efusekeyname: uuid offset: 0 size: 32 [ 0.632911@2] efuse efuse: probe OK! [ 0.633631@2] ion_dev soc:ion_dev: assigned reserved memory node linux,ion-dev [ 0.633831@2] ge2d: ge2d_init_module [ 0.633918@2] ge2d: ge2d_dev major:237 [ 0.634014@2] ge2d: clock source clk_ge2d_gate ffffffc0dd097580 [ 0.634028@2] ge2d: clock clk_ge2d source ffffffc0dd097600 [ 0.634036@2] ge2d: clock source clk_vapb_0 ffffffc0dd097680 [ 0.634038@2] ge2d: ge2d init clock is 500000000 HZ, VPU clock is 666666656 HZ [ 0.634092@2] ge2d: ge2d clock is 499 MHZ [ 0.634097@2] ge2d: find address resource [ 0.634104@2] ge2d: map io source 0x00000000ff940000,size=65536 to 0xffffff8008690000 [ 0.634105@2] ge2d: reserved mem init failed [ 0.634106@2] ge2d: ge2d: pdev=ffffffc0dd6a3800, irq=45, clk=ffffffc0dd097580 [ 0.634126@2] ge2d: ge2d start monitor [ 0.634153@3] ge2d: ge2d workqueue monitor start [ 0.634333@2] amvideom vsync irq: 46 [ 0.634647@2] amvideocap_probe,amvideocap [ 0.636598@2] use cma buf. [ 0.639335@2] fb: osd_init_module [ 0.639474@2] fb: viu vsync irq: 46 [ 0.639479@2] fb: viu2 vsync irq: 55 [ 0.639524@2] 0x000000d8:Y=d8,U=0,V=0 [ 0.639526@2] 0x000000d9:Y=d9,U=0,V=0 [ 0.639527@2] 0x000000da:Y=da,U=0,V=0 [ 0.639528@2] 0x000000db:Y=db,U=0,V=0 [ 0.639687@2] fb: osd_rdma_init: rdma_table p=0xe2a08000,op=0xe2a08000 , v=0xffffff800862f000 [ 0.639701@2] rdma_register, rdma_table_addr ffffff8008631000 rdma_table_addr_phy e2a09000 reg_buf ffffffc0dd1b7000 [ 0.639703@2] rdma_register success, handle 2 table_size 4096 [ 0.639704@2] fb: osd_rdma_init:osd rdma handle = 2. [ 0.639710@2] fb: mem_size: 0x800000 [ 0.639711@2] fb: mem_size: 0x4b80000 [ 0.639711@2] fb: mem_size: 0x100000 [ 0.639712@2] fb: mem_size: 0x100000 [ 0.639713@2] fb: mem_size: 0x800000 [ 0.639744@2] meson-fb meson-fb: assigned reserved memory node linux,meson-fb [ 0.639746@2] fb: reserved memory base:0x0000000077800000, size:800000 [ 0.639812@2] fb: fb def : 1920 1080 1920 2160 32 [ 0.639813@2] fb: init fbdev bpp is:32 [ 0.651810@2] fb: osd[0] enable: 1 (swapper/0) [ 0.668875@2] fb: set osd0 reverse as NONE [ 0.685177@2] fb: osd probe OK [ 0.685272@2] hdmitx: hdcp: hdmitx_hdcp_init [ 0.685593@2] vout: vout2: create vout2 attribute OK [ 0.685688@2] vout: vout2: vout2_fops_create OK [ 0.685691@2] vout: vout2: register server: nulldisp_vout2_server [ 0.685695@2] vout: vout2: init mode null set ok [ 0.685791@2] vout: vout2: clktree_init [ 0.685834@2] vout: vout2: aml_vout2_probe OK [ 0.685868@2] DI: di_module_init ok. [ 0.685870@2] DI: di_module_init: major 510 [ 0.686036@2] deinterlace deinterlace: assigned reserved memory node linux,di_cma [ 0.686039@2] DI: CMA size 0x2800000. [ 0.686048@2] pre_irq:70 [ 0.686052@2] post_irq:71 [ 0.686053@2] DI: di_probe allocate rdma channel 0. [ 0.686056@2] di_get_vpu_clkb: get clk vpu error. [ 0.686080@2] DI: vpu clkb <334000000, 667000000> [ 0.686097@2] DI:enable vpu clkb. [ 0.686103@2] 0x000000dc:Y=dc,U=0,V=0 [ 0.686104@2] 0x000000dd:Y=dd,U=0,V=0 [ 0.686106@2] 0x000000de:Y=de,U=0,V=0 [ 0.686107@2] 0x000000df:Y=df,U=0,V=0 [ 0.686108@2] 0x000000e0:Y=e0,U=0,V=0 [ 0.686109@2] 0x000000e1:Y=e1,U=0,V=0 [ 0.686110@2] 0x000000e2:Y=e2,U=0,V=0 [ 0.686111@2] 0x000000e3:Y=e3,U=0,V=0 [ 0.686112@2] 0x000000f0:Y=f0,U=0,V=0 [ 0.686112@2] 0x000000f1:Y=f1,U=0,V=0 [ 0.686115@2] 0x000000f2:Y=f2,U=0,V=0 [ 0.686116@2] 0x000000f3:Y=f3,U=0,V=0 [ 0.686117@2] 0x000000f4:Y=f4,U=0,V=0 [ 0.686118@2] 0x000000f5:Y=f5,U=0,V=0 [ 0.686119@2] 0x000000f6:Y=f6,U=0,V=0 [ 0.686120@2] 0x000000f7:Y=f7,U=0,V=0 [ 0.686122@2] 0x000000f8:Y=f8,U=0,V=0 [ 0.686123@2] 0x000000f9:Y=f9,U=0,V=0 [ 0.686124@2] 0x000000fa:Y=fa,U=0,V=0 [ 0.686125@2] 0x000000fb:Y=fb,U=0,V=0 [ 0.686126@2] 0x000000fc:Y=fc,U=0,V=0 [ 0.686127@2] 0x000000fd:Y=fd,U=0,V=0 [ 0.686128@2] 0x000000fe:Y=fe,U=0,V=0 [ 0.686130@2] DI: support post write back 254. [ 0.686197@2] DI: di_probe:Di use HRTIMER [ 0.686276@2] di_probe:ok [ 0.686312@2] vdin_drv_init: major 509 [ 0.686384@2] vdin_drv_init: vdin driver init done [ 0.686385@2] [viuin..]viuin_init_module viuin module init [ 0.686492@2] [viuin..]viuin_probe probe ok. [ 0.686673@2] [RX]-hdmirx: hdmirx_init. [ 0.686674@2] ESM HLD: Initializing... [ 0.686762@2] tvin_afe: tvafe_drv_init: major 507 [ 0.686879@2] tvin_afe: tvafe_drv_init. [ 0.686936@2] tvafe_vbi: vbi: vbi_init. [ 0.687002@2] PPMGRDRV: warn: ppmgr module init func called [ 0.687046@2] PPMGRDRV: err: ppmgr_driver_probe called [ 0.690262@2] Reserved memory: failed to init DMA memory pool at 0x00000000ed800000, size 0 MiB [ 0.698930@2] PPMGRDRV: info: ppmgr_dev major:505 [ 0.699467@1] videosync_create_instance dev_s ffffffc0dd571800,dev_s->dev ffffffc0dd500480 [ 0.699470@1] videosync_create_instance reg videosync.0 [ 0.699566@1] aml_vecm_init:module init [ 0.699615@0] videosync_thread started [ 0.699749@1] [ 0.699749@1] VECM probe start [ 0.699998@1] Can't find wb_sel. [ 0.700000@1] hdr:Can't find cfg_en_osd_100. [ 0.700002@1] Can't find tx_op_color_primary. [ 0.700005@1] amlogic, vecm [ 0.700007@1] vlock dt support: 1 [ 0.700009@1] vlock dt new_fsm: 0 [ 0.700010@1] vlock dt hwver: 0 [ 0.700011@1] vlock dt phlock_en: 0 [ 0.700013@1] Can't find vlock_en. [ 0.700014@1] Can't find vlock_mode. [ 0.700016@1] Can't find vlock_pll_m_limit. [ 0.700017@1] Can't find vlock_line_limit. [ 0.700025@1] param_config vlock_en:1 [ 0.700055@1] vlock_status_init vlock_en:0 [ 0.700056@1] aml_vecm_probe: ok [ 0.700550@1] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller [ 0.701183@1] meson-mmc: >>>>>>>>hostbase ffffff800863d000, dmode [ 0.701854@0] 1A2B com register: 82820481 [ 0.701856@0] 1A4B com register: 82820481 [ 0.701857@0] 1A4C com register: 0401007f [ 0.701858@0] 1C32 com register: 00000464 [ 0.701859@0] 1C34 com register: 00000004 [ 0.701860@0] 1C3D com register: 00000461 [ 0.701883@0] 1A2B com register: 82820481 [ 0.701884@0] 1A4B com register: 82820481 [ 0.701885@0] 1A4C com register: 0401007f [ 0.701886@0] 1C32 com register: 00000464 [ 0.701887@0] 1C34 com register: 00000004 [ 0.701888@0] 1C3D com register: 00000461 [ 0.705400@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80 [ 0.705403@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c [ 0.747626@0] meson-mmc: meson_mmc_probe() : success! [ 0.754695@3] meson-mmc: >>>>>>>>hostbase ffffff8008688000, dmode [ 0.755246@3] meson-mmc: gpio_cd = 1ca [ 0.757594@0] meson-mmc: emmc: resp_timeout,vstat:0x9dff0800,virqc:3fff [ 0.761816@0] meson-mmc: emmc: err: wait for desc write back, bus_fsm:0x7 [ 0.768584@2] meson-mmc: meson_mmc_irq_thread_v3 600 emmc: cmd:1 [ 0.768586@2] meson-mmc: meson_mmc_irq_thread_v3() 616: set 1st retry! [ 0.775082@2] meson-mmc: retry cmd 1 the 3-th time(s) [ 0.781119@0] meson-mmc: emmc: resp_timeout,vstat:0x9dff0800,virqc:3fff [ 0.786687@0] meson-mmc: emmc: err: wait for desc write back, bus_fsm:0x7 [ 0.793455@2] meson-mmc: meson_mmc_irq_thread_v3 600 emmc: cmd:1 [ 0.793456@2] meson-mmc: retry cmd 1 the 2-th time(s) [ 0.793509@0] meson-mmc: meson_mmc_probe() : success! [ 0.793677@0] amlogic mtd driver init [ 0.794400@0] cectx ff80023c.aocec: cec driver date:Ver 2019/3/25 [ 0.794400@0] [ 0.794605@0] cectx ff80023c.aocec: compatible:amlogic, aocec-g12a [ 0.794608@0] cectx ff80023c.aocec: cecb_ver:0x1 [ 0.794610@0] cectx ff80023c.aocec: line_reg:0x1 [ 0.794612@0] cectx ff80023c.aocec: line_bit:0x3 [ 0.794614@0] cectx ff80023c.aocec: ee_to_ao:0x1 [ 0.794701@0] input: cec_input as /devices/virtual/input/input0 [ 0.794879@1] cectx ff80023c.aocec: not find 'port_num' [ 0.794882@1] cectx ff80023c.aocec: using cec:0 [ 0.794898@1] cectx ff80023c.aocec: no hdmirx regs [ 0.794900@1] cectx ff80023c.aocec: no hhi regs [ 0.794905@1] cectx ff80023c.aocec: not find 'output' [ 0.798040@1] cectx ff80023c.aocec: irq cnt:2 [ 0.830837@4] cectx ff80023c.aocec: wakeup_reason:0x0 [ 0.830901@5] cectx ff80023c.aocec: cev val1: 0x0;val2: 0x0 [ 0.830904@5] cectx ff80023c.aocec: aml_cec_probe success end [ 0.831043@5] unifykey: storage in base: 0xffffffc005000000 [ 0.831044@5] unifykey: storage out base: 0xffffffc005040000 [ 0.831045@5] unifykey: storage block base: 0xffffffc005080000 [ 0.831045@5] unifykey: probe done! [ 0.831188@5] unifykey: aml_unifykeys_init done! [ 0.831215@5] meson ts init [ 0.831237@5] tsensor id: 0 [ 0.831312@5] tsensor trim info: 0xfa000003! [ 0.831313@5] tsensor hireboot: 0xc0ff2a80 [ 0.831341@5] meson ts init [ 0.831351@5] tsensor id: 1 [ 0.831390@5] tsensor trim info: 0xfa00000a! [ 0.831390@5] tsensor hireboot: 0xc0ff2a80 [ 0.831445@5] audio_dsp: [dsp]register dsp to char divece(257) [ 0.831550@3] amaudio: amaudio: driver amaudio init! [ 0.831751@5] amaudio: amaudio_init - amaudio: driver amaudio succuess! [ 0.831956@4] sysled: module init [ 0.832058@4] meson_wdt ffd0f0d0.watchdog: start watchdog [ 0.832059@4] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog [ 0.832165@3] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done [ 0.832375@5] amlogic rfkill init [ 0.832553@5] meson-saradc ff809000.saradc: set delay per tick to <1ms> by default. [ 0.832555@5] meson-saradc ff809000.saradc: set ticks per period to <1> by default. [ 0.832995@4] dmc_monitor_probe [ 0.833334@5] defendkey ff630218.defendkey: Reserved memory is not enough! [ 0.833340@5] defendkey: probe of ff630218.defendkey failed with error -22 [ 0.833494@5] No find node. [ 0.833498@5] register clk_set_setting cpu[41] [ 0.833566@3] Registered firmware driver success. [ 0.833947@3] Try to load video/h264_enc.bin ... [ 0.833971@3] load firmware size : 76288, Name : video/h264_enc.bin. [ 0.833975@3] the fw pack ver v0.0 is too lower. [ 0.833976@3] it may work abnormally so need to be update in time. [ 0.834348@3] Try to load video/video_ucode.bin ... [ 0.834797@3] load firmware size : 1671680, Name : video/video_ucode.bin. [ 0.838730@4] ammvdec_mpeg4_driver_init_module [ 0.838763@4] amvdec_vc1 module init [ 0.838795@4] amvdec_h264 module init [ 0.838871@4] ammvdec_h264 module init [ 0.838905@4] amvdec_h265 module init [ 0.838970@4] amvdec_vp9 module init [ 0.839128@4] amvdec_avs module init [ 0.839230@4] amvenc_avc_probe -- reserved memory config fail. [ 0.839232@4] amvenc_avc - cma memory pool size: 60 MB [ 0.839240@4] encode_wq_init. [ 0.839242@4] encode start monitor. [ 0.839284@3] encode workqueue monitor start. [ 0.839418@3] vpu_init [ 0.839471@3] vpu_probe [ 0.839473@3] HevcEnc reserved memory config fail. [ 0.839474@3] HevcEnc - cma memory pool size: 64 MB [ 0.839482@3] HevcEnc - wave420l_irq: 53 [ 0.839509@3] vpu base address get from platform driver physical base addr=0xff610000, virtual base=0xffffff80086b4000 [ 0.839573@5] success to probe vpu device with video memory from cma [ 0.839670@5] Amlogic A/V streaming port init [ 0.840269@5] get gate demux control ok ffffffc0dd3a2240 [ 0.840277@5] get gate parser_top control ok ffffffc0dd3a2780 [ 0.840296@5] get gate vdec control ok ffffffc0dd3a2680 [ 0.840300@5] get gate clk_81 control failed (null) [ 0.840323@5] get gate clk_vdec_mux control ok ffffffc0dd3a2300 [ 0.840349@5] get gate clk_hcodec_mux control ok ffffffc0dd3a2480 [ 0.840379@5] get gate clk_hevc_mux control ok ffffffc0dd780c00 [ 0.840414@5] get gate clk_hevcb_mux control ok ffffffc0dd780a00 [ 0.840429@5] get gate ahbarb0 control ok ffffffc0dd612d00 [ 0.840431@5] get gate asyncfifo control failed (null) [ 0.840601@3] bl301_manager: driver init [ 0.840602@3] bl301_manager: IR remote wake-up code: 0x23dc4db2 [ 0.840603@3] bl301_manager: IR remote wake-up code mask: 0xffffffff [ 0.840604@3] bl301_manager: IR remote wake-up code protocol: 0x0 [ 0.840605@3] bl301_manager: enable 5V system power on suspend/power off state: 0 [ 0.890399@0] meson-mmc: emmc: resp_timeout,vstat:0x9dff0800,virqc:3fff [ 0.895977@0] meson-mmc: emmc: err: wait for desc write back, bus_fsm:0x7 [ 0.902745@2] meson-mmc: meson_mmc_irq_thread_v3 600 emmc: cmd:1 [ 0.902747@2] meson-mmc: retry cmd 1 the 1-th time(s) [ 0.908771@0] meson-mmc: emmc: resp_timeout,vstat:0x9dff0800,virqc:3fff [ 0.914347@0] meson-mmc: emmc: err: wait for desc write back, bus_fsm:0x7 [ 0.921115@2] meson-mmc: meson_mmc_irq_thread_v3 600 emmc: cmd:1 [ 0.921117@2] meson-mmc: Command retried failed line:634, cmd:1 [ 0.927075@0] meson-mmc: actual_clock :0, HHI_nand: 0x80 [ 0.927078@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c [ 0.940964@1] usbcore: registered new interface driver snd-usb-audio [ 0.942134@1] aml_codec_T9015 ff632000.t9015: aml_T9015_audio_codec_probe [ 0.942213@1] T9015 acodec used by auge, tdmout:2 [ 0.943513@1] Error: Driver 'spdif-dit' is already registered, aborting... [ 0.945177@1] asoc debug: aml_audio_controller_probe-116 [ 0.946214@1] asoc-aml-card auge_sound: aml_card_probe, parse error -517 [ 0.951444@1] aml_card_probe error ret:-517 [ 0.955925@1] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4 [ 0.955937@1] TDM id 2 i2s2hdmi:0 [ 0.955945@1] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = 1, lane_oe_mask_out = 0 [ 0.956122@1] snd_tdm ff642000.audiobus:tdmc: aml_tdm_get_pins error! [ 0.956124@1] No channel mask node Channel_Mask [ 0.956162@1] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4 [ 0.956171@1] TDM id 1 i2s2hdmi:1 [ 0.956175@1] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = f, lane_oe_mask_out = 0 [ 0.956303@1] snd_tdm ff642000.audiobus:tdmb: aml_tdm_get_pins error! [ 0.956305@1] No channel mask node Channel_Mask [ 0.956767@1] aml_spdif_platform_probe, spdif ID = 0 [ 0.957016@1] SPDIF id 0 asrc_id:0 auto_asrc:0 [ 0.957083@1] spdifout_play_with_zerodata, spdif id:0 enable:0 [ 0.957087@1] spdif_a fifo ctrl, frddr:0 type:3, 32 bits, chmask 0x3, swap 0x10 [ 0.957091@1] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200 [ 0.957096@1] hdmitx: audio: aout notify format CT_PCM [ 0.957098@1] hdmitx: hw: set audio [ 0.957104@1] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0 [ 0.957115@1] hdmitx: fs = 3, cd = 4, tmds_clk = 148352 [ 0.957117@1] hdmitx: hw: aud_n_para = 5824 [ 0.957124@1] hdmitx: hw: set channel status [ 0.957151@1] hdmitx: audio: Audio Type: PCM [ 0.957152@1] hdmitx: audio: set audio param [ 0.957156@1] spdif_a is set to enable [ 0.957168@1] aml_spdif_platform_probe, register soc platform [ 0.957207@1] aml_spdif_platform_probe, spdif ID = 1 [ 0.957258@1] spdifout_play_with_zerodata, spdif id:1 enable:0 [ 0.957260@1] spdif_b fifo ctrl, frddr:0 type:3, 32 bits, chmask 0x3, swap 0x10 [ 0.957264@1] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200 [ 0.957269@1] spdif_b is set to enable [ 0.957274@1] aml_spdif_platform_probe, register soc platform [ 0.957826@1] audio_ddr_mngr: 0, irqs toddr 34, frddr 37 [ 0.957828@1] audio_ddr_mngr: 1, irqs toddr 35, frddr 38 [ 0.957830@1] audio_ddr_mngr: 2, irqs toddr 36, frddr 39 [ 0.958065@1] audiolocker_platform_probe [ 0.959265@1] Register vad [ 0.959540@1] Netfilter messages via NETLINK v0.30. [ 0.959650@1] Initializing XFRM netlink socket [ 0.959664@1] NET: Registered protocol family 17 [ 0.959689@1] Key type dns_resolver registered [ 0.960400@1] Registered swp emulation handler [ 0.960410@1] Registered cp15_barrier emulation handler [ 0.960417@1] Registered setend emulation handler [ 0.960878@1] registered taskstats version 1 [ 0.995652@0] meson-mmc: card IN [ 0.995679@0] meson-mmc: normal card in [ 1.035691@5] hdmitx: system: plugin [ 1.037706@5] hdmitx: hdmitx: ddc rd8b error 0x50 0x00 0x00 [ 1.119710@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80 [ 1.119713@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c [ 1.166904@5] hdmitx: edid: EDID Parser: [ 1.166908@5] hdmitx: edid: get dtd0 vic: 16 [ 1.166917@5] hdmitx: edid: get dtd1 vic: 130 [ 1.166918@5] hdmitx: edid: find IEEEOUT [ 1.166933@5] hdmitx: edid: check sum valid [ 1.166934@5] hdmitx: edid: check sum valid [ 1.166936@5] hdmitx: edid: update rx hdr info 0 at edid parsing [ 1.166937@5] hdmitx: edid: Setting maxTMDSclock from range block [ 1.166939@5] hdmitx: edid: check sum valid [ 1.166940@5] hdmitx: edid: check sum valid [ 1.166941@5] hdmitx: edid: blk0 raw data [ 1.166957@5] hdmitx: edid: [ 1.166957@5] 00ffffffffffff004dd90192010101010813010380331d78eadd45a3554fa027 [ 1.166957@5] 12505420000001010101010101010101010101010101023a801871382d40582c [ 1.166957@5] 4500fe1f1100001e000000fe000a202020202020202020202020000000fc0053 [ 1.166957@5] 4f4e59204156414d500a2020000000fd00384c1e5311000a2020202020200169 [ 1.166957@5] [ 1.166957@5] [ 1.166958@5] hdmitx: edid: blk1 raw data [ 1.166972@5] hdmitx: edid: [ 1.166972@5] 0203214141012f091f070d1f070f1f071507553d07c0835f000066030c001100 [ 1.166972@5] 8000000000000000000000000000000000000000000000000000000000000000 [ 1.166972@5] 0000000000000000000000000000000000000000000000000000000000000000 [ 1.166972@5] 0000000000000000000000000000000000000000000000000000000000000034 [ 1.166972@5] [ 1.166972@5] [ 1.166974@5] hdmitx: system: update physcial size: 510 290 [ 1.166978@5] hdmitx: system: get current mode: 1080p60hz [ 1.166979@5] hdmitx: system: update rx hdr info 0 [ 1.166980@5] hdmitx: system: update physcial size: 510 290 [ 1.166989@5] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16 [ 1.166991@5] hdmitx: hw: set audio [ 1.166993@5] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0 [ 1.167002@5] hdmitx: fs = 3, cd = 4, tmds_clk = 148352 [ 1.167004@5] hdmitx: hw: aud_n_para = 5824 [ 1.167010@5] hdmitx: hw: set channel status [ 1.167037@5] hdmitx: audio: Audio Type: PCM [ 1.171752@1] aml_dai_spdif_probe [ 1.171762@1] aml_dai_spdif_probe [ 1.171777@1] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present [ 1.173883@1] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16 [ 1.181299@1] aml_dai_tdm_probe, failed add snd spdif controls [ 1.187073@1] set normal 512 fs /4 fs [ 1.187098@1] set spdifout clk:6144000, mpll:24576000 [ 1.187100@1] get spdifout clk:6143997, mpll:24575987 [ 1.187108@1] aml_dai_set_spdif_fmt , fmt 0x4010 [ 1.187186@1] aml_spdif_new spdif_b, clk continuous:1 [ 1.187187@1] spdifout_play_with_zerodata_free, spdif id:1 [ 1.187433@1] asoc-aml-card auge_sound: dit-hifi <-> SPDIF-B mapping ok [ 1.187451@1] set mclk:12288000, mpll:24576000, get mclk:12287994, mpll:24575987 [ 1.187454@1] aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3) [ 1.187456@1] lanes_out_cnt(1), lanes_in_cnt(1) [ 1.187457@1] lanes_oe_out_cnt(0), lanes_oe_in_cnt(0) [ 1.187458@1] lanes_lb_cnt(0) [ 1.187460@1] slots(2), slot_width(32) [ 1.187472@1] asoc aml_dai_set_tdm_fmt, 0x4011, ffffffc0dd404d18, id(2), clksel(2) [ 1.187477@1] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3) [ 1.187858@1] asoc-aml-card auge_sound: T9015-audio-hifi <-> TDM-C mapping ok [ 1.187862@1] set normal 512 fs /4 fs [ 1.187882@1] set spdifout clk:6144000, mpll:24576000 [ 1.187885@1] get spdifout clk:6143997, mpll:24575987 [ 1.187887@1] aml_dai_set_spdif_fmt , fmt 0x4010 [ 1.187952@1] aml_spdif_new spdif_a, clk continuous:1 [ 1.187954@1] spdifout_play_with_zerodata_free, spdif id:0 [ 1.188128@1] asoc-aml-card auge_sound: dit-hifi <-> SPDIF mapping ok [ 1.188144@1] set mclk:12288000, mpll:24576000, get mclk:12287994, mpll:24575987 [ 1.188147@1] aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3) [ 1.188148@1] lanes_out_cnt(4), lanes_in_cnt(1) [ 1.188150@1] lanes_oe_out_cnt(0), lanes_oe_in_cnt(0) [ 1.188151@1] lanes_lb_cnt(0) [ 1.188152@1] slots(2), slot_width(32) [ 1.188160@1] asoc aml_dai_set_tdm_fmt, 0x4011, ffffffc0dd404e18, id(1), clksel(1) [ 1.188164@1] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3) [ 1.188333@1] asoc-aml-card auge_sound: dit-hifi <-> TDM-B mapping ok [ 1.189264@1] snd_card_add_kcontrols card:ffffffc0dcbab018 [ 1.189276@1] effect_v2 is not init [ 1.189278@1] Not init vad [ 1.189279@1] Failed to add VAD controls [ 1.189299@1] eq/drc v1 function enable [ 1.214228@0] meson-mmc: actual_clock :0, HHI_nand: 0x80 [ 1.214231@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c [ 1.215670@1] add line-out mute controls [ 1.216031@2] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host [ 1.218635@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.218644@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.218650@2] usb: xhci: determined sg_tablesize: 4294967295 [ 1.218814@2] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x20010010 [ 1.218834@2] xhci-hcd xhci-hcd.0.auto: irq 23, io mem 0xff500000 [ 1.218894@2] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.218897@2] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.218899@2] usb usb1: Product: xHCI Host Controller [ 1.218901@2] usb usb1: Manufacturer: Linux 4.9.190 xhci-hcd [ 1.218902@2] usb usb1: SerialNumber: xhci-hcd.0.auto [ 1.219118@2] hub 1-0:1.0: USB hub found [ 1.219130@2] hub 1-0:1.0: 2 ports detected [ 1.219268@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.219273@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.219276@2] usb: xhci: determined sg_tablesize: 4294967295 [ 1.219300@2] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.219332@2] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.219335@2] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.219337@2] usb usb2: Product: xHCI Host Controller [ 1.219338@2] usb usb2: Manufacturer: Linux 4.9.190 xhci-hcd [ 1.219340@2] usb usb2: SerialNumber: xhci-hcd.0.auto [ 1.219528@2] hub 2-0:1.0: USB hub found [ 1.219538@2] hub 2-0:1.0: 1 port detected [ 1.220964@2] rtc-pcf8563 3-0051: setting system clock to 2020-03-18 04:33:47 UTC (1584506027) [ 1.221138@2] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc0dd5a2c00) [ 1.221152@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0 [ 1.221162@2] dwc_otg ff400000.dwc2_a: base=0xffffff8008e40000 [ 1.221164@2] dwc_otg ff400000.dwc2_a: dwc_otg_device=0xffffffc0dd0a5a00 [ 1.231662@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80 [ 1.231665@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c [ 1.248543@0] meson-aml-mmc ffe05000.sd: divider requested rate 200000000 != actual rate 199999997: ret=0 [ 1.248546@0] meson-mmc: actual_clock :199999997, HHI_nand: 0x80 [ 1.248548@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245 [ 1.248551@0] meson-mmc: Data 1 aligned delay is 0 [ 1.248553@0] meson-mmc: sd: clk 199999997 tuning start [ 1.250472@0] meson-mmc: sd: rx_tuning_result[0] = 40 [ 1.251821@0] meson-mmc: sd: rx_tuning_result[1] = 40 [ 1.251858@0] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac [ 1.254858@0] meson-mmc: sd: rx_tuning_result[3] = 40 [ 1.256240@0] meson-mmc: sd: rx_tuning_result[4] = 40 [ 1.256242@0] meson-mmc: sd: best_win_start =3, best_win_size =4 [ 1.256246@0] meson-mmc: sd: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x2000 [ 1.256254@0] sd: new ultra high speed SDR104 SDHC card at address aaaa [ 1.256256@0] sd: clock 199999997, 4-bit-bus-width [ 1.256256@0] [ 1.260626@0] mmcblk1: sd:aaaa SA08G 7.40 GiB [ 1.261637@0] mmcblk1: p1 p2 [ 1.321275@2] dwc_otg: Core Release: 3.30a [ 1.321280@2] dwc_otg: Setting default values for core params [ 1.321286@2] dwc_otg: curmode: 0, host_only: 0 [ 1.321298@2] dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT [ 1.333429@2] dwc_otg: Using Buffer DMA mode [ 1.333431@2] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 1.333432@2] dwc_otg: Working on port type = SLAVE [ 1.333435@2] dwc_otg: Dedicated Tx FIFOs mode [ 1.334772@2] meson_cdev probe [ 1.334821@2] meson_cdev index: 0 [ 1.334899@2] meson_cdev index: 1 [ 1.334942@2] thermal: no cluster id, cpucore as one cooldev [ 1.334954@2] meson_cdev index: 2 [ 1.334956@2] cpucore_cooling_register, max_cpu_core_num:6 [ 1.334958@2] cpucore_cooling_register, clutser[1] core num:4 [ 1.334959@2] cpucore_cooling_register, clutser[0] core num:2 [ 1.335009@2] meson_cdev index: 3 [ 1.335021@2] meson_cdev index: 4 [ 1.335045@2] find tzd id: 0 [ 1.335146@2] find tzd id: 0 [ 1.335223@2] find tzd id: 0 [ 1.335266@2] meson_cdev probe done [ 1.335326@2] gxbb_pm: enter meson_pm_probe! [ 1.335340@2] gxbb_pm: meson_pm_probe done [ 1.335948@2] ALSA device list: [ 1.335950@2] #0: AML-AUGESOUND [ 1.337221@2] Freeing unused kernel memory: 4800K [ 1.361234@4] fb: malloc_osd_memory, cma:ffffff800abc76c8 [ 1.361239@4] fb: malloc_osd_memory, 1283, base:0x0000000077800000, size:8388608 [ 1.361251@4] fb: use ion buffer for fb memory, fb_index=0 [ 1.388152@2] meson-fb meson-fb: create ion_client ffffffc0dcbb5d80, handle=ffffffc0dc528e40 [ 1.388157@2] meson-fb meson-fb: ion memory(0): created fb at 0x00000000e5800000, size 75 MiB [ 1.388158@2] fb: Frame buffer memory assigned at [ 1.388160@2] fb: 0, phy: 0x00000000e5800000, vir:0xffffff800acba000, size=77312K [ 1.388160@2] [ 1.388162@2] fb: logo_index=0,fb_index=0 [ 1.388163@2] fb: ---------------clear fb0 memory ffffff800acba000 [ 1.414870@2] fb: osd[0] canvas.idx =0x40 [ 1.414871@2] fb: osd[0] canvas.addr=0xe5800000 [ 1.414872@2] fb: osd[0] canvas.width=7680 [ 1.414873@2] fb: osd[0] canvas.height=2160 [ 1.414874@2] fb: osd[0] frame.width=1920 [ 1.414875@2] fb: osd[0] frame.height=1080 [ 1.414876@2] fb: osd[0] out_addr_id =0x1 [ 1.419355@2] fb: osd_release now.index=0,open_count=1 [ 1.420317@3] fb: malloc_osd_memory, cma:ffffff800abc76c8 [ 1.420321@3] fb: malloc_osd_memory, 1283, base:0x0000000077800000, size:8388608 [ 1.420322@3] fb: use ion buffer for fb memory, fb_index=1 [ 1.420787@3] meson-fb meson-fb: create ion_client ffffffc0dcbb5d80, handle=ffffffc0dc5fda00 [ 1.420790@3] meson-fb meson-fb: ion memory(1): created fb at 0x00000000ea400000, size 1 MiB [ 1.420791@3] fb: Frame buffer memory assigned at [ 1.420793@3] fb: 1, phy: 0x00000000ea400000, vir:0xffffff800f83b000, size=1024K [ 1.420793@3] [ 1.420795@3] fb: logo_index=0,fb_index=1 [ 1.420796@3] fb: ---------------clear fb1 memory ffffff800f83b000 [ 1.421151@3] fb: osd[1] canvas.idx =0x43 [ 1.421152@3] fb: osd[1] canvas.addr=0xea400000 [ 1.421153@3] fb: osd[1] canvas.width=128 [ 1.421154@3] fb: osd[1] canvas.height=32 [ 1.421155@3] fb: osd[1] frame.width=32 [ 1.421156@3] fb: osd[1] frame.height=32 [ 1.421157@3] fb: osd[1] out_addr_id =0x2 [ 1.436193@0] fb: osd_release now.index=1,open_count=1 [ 1.452884@1] vfm_map_store:rm default [ 1.452884@1] [ 1.452938@1] vfm_map_store:add default decoder ppmgr deinterlace amvideo [ 1.452938@1] [ 1.453014@1] fb: osd[0] enable: 1 (sh) [ 1.469476@1] fb: osd[1] enable: 0 (sh) [ 1.483629@2] amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(0) tuning for host cf(xhci_hub_control)-- [ 1.495248@3] font: no symbol version for module_layout [ 1.502705@0] Console: switching to colour frame buffer device 240x67 [ 1.524954@2] Checking disk(s): UUID=2911-4504 UUID=d64f1eca-7a63-4904-9030-3446e096b23b [ 1.543625@2] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 1.685941@2] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610 [ 1.685944@2] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.685945@2] usb 1-1: Product: USB2.1 Hub [ 1.685947@2] usb 1-1: Manufacturer: GenesysLogic [ 1.699511@2] hub 1-1:1.0: USB hub found [ 1.699752@2] hub 1-1:1.0: 4 ports detected [ 1.776036@0] fsck: CP437: Invalid argument [ 1.776036@0] fsck: fsck.fat 3.0.28 (2015-05-16) [ 1.776036@0] fsck: /dev/mmcblk1p1: 23 files, 26119/65501 clusters [ 1.776036@0] fsck: STORAGE: recovering journal [ 1.776036@0] fsck: STORAGE: clean, 157/1808384 files, 235085/7233536 blocks [ 1.803756@0] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 1.826307@0] usb 2-1: New USB device found, idVendor=05e3, idProduct=0620 [ 1.826312@0] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.826315@0] usb 2-1: Product: USB3.1 Hub [ 1.826317@0] usb 2-1: Manufacturer: GenesysLogic [ 1.827586@0] hub 2-1:1.0: USB hub found [ 1.827942@0] hub 2-1:1.0: 4 ports detected [ 2.009939@0] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 2.033162@0] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.043610@2] usb 1-1.3: new high-speed USB device number 3 using xhci-hcd [ 2.167729@2] usb 1-1.3: New USB device found, idVendor=0424, idProduct=2514 [ 2.167732@2] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.179395@2] hub 1-1.3:1.0: USB hub found [ 2.179430@2] hub 1-1.3:1.0: 4 ports detected [ 2.281149@4] cgroup: cgroup2: unknown option "nsdelegate" [ 2.284419@4] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 2.284729@4] systemd[1]: Detected architecture arm64. [ 2.286978@4] systemd[1]: Set hostname to . [ 2.315574@1] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 2.315583@1] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.315617@2] usb 1-1.4: new full-speed USB device number 4 using xhci-hcd [ 2.346531@2] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. [ 2.346557@2] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. [ 2.363808@2] systemd[1]: Listening on udev Kernel Socket. [ 2.364408@2] systemd[1]: Listening on RPCbind Server Activation Socket. [ 2.365163@2] systemd[1]: Created slice User and Session Slice. [ 2.371796@3] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200 [ 2.416720@0] kernel-overlays-setup: setup base modules [ 2.441935@2] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c52b [ 2.441940@2] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.441942@2] usb 1-1.4: Product: USB Receiver [ 2.441943@2] usb 1-1.4: Manufacturer: Logitech [ 2.486011@3] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.9.190 [ 2.508581@5] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware [ 2.508675@5] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays [ 2.509775@4] kernel-overlays-setup: done [ 2.562126@1] media: Linux media interface: v0.10 [ 2.575418@4] Linux video capture interface: v2.00 [ 2.591223@5] amlvid:info: amlvideo_init called [ 2.591227@5] amlvid:info: amlvideo_create_instance called [ 2.591230@5] amlvid:info: v4l2_dev.name=:amlvideo-000 [ 2.591344@4] amlvideo-000: V4L2 device registered as video10 [ 2.594446@4] wifi_dummy: loading out-of-tree module taints kernel. [ 2.594632@4] Triggered SDIO WiFi power on and bus rescan. [ 2.594638@4] (NULL device *): [extern_wifi_set_enable] WIFI Disable! 0 [ 2.699690@1] systemd-journald[2403]: Received request to flush runtime journal from PID 1 [ 2.857652@5] NET: Registered protocol family 10 [ 2.923640@4] (NULL device *): [extern_wifi_set_enable] WIFI Enable! 0 [ 3.243615@4] meson-mmc: Error: sdio_host is NULL [ 3.243619@4] meson-mmc: [sdio_reinit] finish [ 3.404084@0] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1.4/input2 [ 3.452040@1] fb: osd_release now.index=0,open_count=1 [ 3.452088@1] Console: switching to colour dummy device 80x25 [ 3.534588@1] Registered IR keymap rc-empty [ 3.534827@1] input: meson-ir as /devices/platform/ff808040.meson-ir/rc/rc0/input1 [ 3.535034@3] rc rc0: meson-ir as /devices/platform/ff808040.meson-ir/rc/rc0 [ 3.539072@1] meson-ir ff808040.meson-ir: AO_RTI_PIN_MUX : 0x100011 [ 3.539083@1] meson-ir ff808040.meson-ir: receiver initialized [ 3.549563@5] lirc_dev: IR Remote Control driver registered, major 496 [ 3.559896@1] rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0 [ 3.559905@1] IR LIRC bridge handler initialized [ 3.702709@0] input: Logitech K360 as /devices/platform/ff500000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:4004.0004/input/input2 [ 3.703528@4] logitech-hidpp-device 0003:046D:4004.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K360] on usb-xhci-hcd.0.auto-1.4:1 [ 3.709715@2] input: Logitech Performance MX as /devices/platform/ff500000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:101A.0005/input/input3 [ 3.709943@2] logitech-hidpp-device 0003:046D:101A.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Performance MX] on usb-xhci-hcd.0.auto-1.4:2 [ 3.769987@0] IR NEC protocol handler initialized [ 3.798887@1] IR RC6 protocol handler initialized [ 3.960090@5] set mac for wol = 00:1e:06:42:45:a7 [ 3.972584@5] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP. [ 3.972919@5] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.271882@2] the demux clock on, ref cnt: 1 [ 5.271889@2] the parser_top clock on, ref cnt: 1 [ 5.271891@2] the vdec clock on, ref cnt: 1 [ 5.271908@2] the clk_hevc_mux clock on, ref cnt: 1 [ 5.271911@2] the clk_hevcb_mux clock on, ref cnt: 1 [ 5.271960@2] hevc mux clock is 499999992 Hz [ 5.271978@2] hevc back mux clock is 499999992 Hz [ 5.272003@2] the clk_vdec_mux clock on, ref cnt: 1 [ 5.272021@2] vdec mux clock is 499999992 Hz [ 5.272062@2] vdec_create instance ffffff800fc1f000, total 1 [ 5.272069@2] vdec_release instance ffffff800fc1f000, total 1 [ 5.272080@2] the clk_hevc_mux clock off, ref cnt: 0 [ 5.272082@2] the clk_hevcb_mux clock off, ref cnt: 0 [ 5.272094@2] the clk_vdec_mux clock off, ref cnt: 0 [ 5.272096@2] the vdec clock off, ref cnt: 0 [ 5.272098@2] the parser_top clock off, ref cnt: 0 [ 5.272099@2] the demux clock off, ref cnt: 0 [ 5.458574@0] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmc [ 5.459829@0] tdm playback mute: 1, lane_cnt = 4 [ 5.460242@0] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmc [ 5.460929@0] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmc [ 5.461940@0] tdm playback mute: 1, lane_cnt = 4 [ 5.462035@0] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmc [ 5.462646@0] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb [ 5.462962@0] tdm playback mute: 1, lane_cnt = 4 [ 5.463048@0] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb [ 5.464454@0] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb [ 5.464786@0] tdm playback mute: 1, lane_cnt = 4 [ 5.464877@0] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb [ 5.465528@0] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb [ 5.465877@0] tdm playback mute: 1, lane_cnt = 4 [ 5.465964@0] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb [ 5.476408@2] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmc [ 5.477134@2] tdm playback mute: 1, lane_cnt = 4 [ 5.477173@2] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmc [ 5.477469@2] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb [ 5.477998@2] tdm playback mute: 1, lane_cnt = 4 [ 5.478024@2] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb [ 5.478322@2] spdif_a keep clk continuous [ 5.478324@2] aml_spdif_open [ 5.478381@2] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif [ 5.478593@2] spdif_a keep clk continuous [ 5.478595@2] aml_spdif_close [ 5.478619@2] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif [ 5.478870@2] spdif_b keep clk continuous [ 5.478871@2] aml_spdif_open [ 5.478926@2] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif_b [ 5.479448@2] spdif_b keep clk continuous [ 5.479450@2] aml_spdif_close [ 5.479474@2] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif_b [ 5.486248@0] audio_dsp: buf=0 [ 5.486254@0] audio_dsp: IEC958_mode_raw=0 [ 5.486286@0] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM [ 5.486288@0] audio_dsp: last mode 0,now 0 [ 5.490753@0] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb [ 5.492167@0] set mclk:11289600, mpll:22579200, get mclk:11289593, mpll:22579186 [ 5.492174@0] asoc aml_dai_set_tdm_fmt, 0x4011, ffffffc0dd404e18, id(1), clksel(1) [ 5.492176@0] aml_dai_set_tdm_fmt(), fmt not change [ 5.492179@0] dump_pcm_setting(ffffffc0dd404e18) [ 5.492180@0] pcm_mode(1) [ 5.492181@0] sysclk(11289600) [ 5.492183@0] sysclk_bclk_ratio(4) [ 5.492184@0] bclk(2822400) [ 5.492185@0] bclk_lrclk_ratio(64) [ 5.492186@0] lrclk(44100) [ 5.492187@0] tx_mask(0x3) [ 5.492189@0] rx_mask(0x3) [ 5.492190@0] slots(2) [ 5.492191@0] slot_width(32) [ 5.492192@0] lane_mask_in(0x2) [ 5.492193@0] lane_mask_out(0xf) [ 5.492194@0] lane_oe_mask_in(0x0) [ 5.492195@0] lane_oe_mask_out(0x0) [ 5.492197@0] lane_lb_mask_in(0x0) [ 5.492198@0] aml_dai_set_tdm_sysclk(), mpll no change, keep clk [ 5.492199@0] aml_dai_set_tdm_sysclk(), mclk no change, keep clk [ 5.492201@0] set mclk:11289600, mpll:22579200, get mclk:11289593, mpll:22579186 [ 5.492203@0] aml_dai_set_clkdiv, div 4, clksel(1) [ 5.492210@0] aml_dai_set_bclk_ratio, select I2S mode [ 5.492214@0] mclk is not configured [ 5.492311@0] hdmitx: hw: set audio [ 5.492314@0] hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 1, hdev->aud_output_ch = 33 [ 5.492327@0] hdmitx: fs = 3, cd = 4, tmds_clk = 148352 [ 5.492329@0] hdmitx: hw: aud_n_para = 5824 [ 5.492337@0] hdmitx: hw: set channel status [ 5.519658@0] hdmitx: audio: Audio Type: PCM [ 5.519667@0] hdmitx: hw: set audio [ 5.519671@0] hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 1, hdev->aud_output_ch = 33 [ 5.519682@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148352 [ 5.519684@0] hdmitx: hw: aud_n_para = 8918 [ 5.519692@0] hdmitx: hw: set channel status [ 5.547632@0] hdmitx: audio: Audio Type: PCM [ 5.547636@0] hdmitx: audio: set audio param [ 5.575692@1] tdm playback mute: 0, lane_cnt = 4 [ 5.575871@1] tdm playback mute: 0, lane_cnt = 4 [ 5.577341@1] tdm playback mute: 1, lane_cnt = 4 [ 5.577409@1] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb [ 5.623476@2] fb: osd_release now.index=0,open_count=1 [ 5.631987@0] fb: malloc_osd_memory, cma:ffffff800abc76c8 [ 5.631995@0] fb: malloc_osd_memory, 1283, base:0x0000000077800000, size:8388608 [ 5.631997@0] fb: use ion buffer for fb memory, fb_index=2 [ 5.632574@0] meson-fb meson-fb: create ion_client ffffffc0dcbb5d80, handle=ffffffc0d4fafa40 [ 5.632578@0] meson-fb meson-fb: ion memory(2): created fb at 0x00000000ea500000, size 1 MiB [ 5.632580@0] fb: Frame buffer memory assigned at [ 5.632583@0] fb: 2, phy: 0x00000000ea500000, vir:0xffffff800fc69000, size=1024K [ 5.632583@0] [ 5.632585@0] fb: logo_index=0,fb_index=2 [ 5.632588@0] fb: ---------------clear fb2 memory ffffff800fc69000 [ 5.632852@0] fb: osd[2] canvas.idx =0x41 [ 5.632853@0] fb: osd[2] canvas.addr=0xea500000 [ 5.632855@0] fb: osd[2] canvas.width=128 [ 5.632856@0] fb: osd[2] canvas.height=32 [ 5.632857@0] fb: osd[2] frame.width=32 [ 5.632859@0] fb: osd[2] frame.height=32 [ 5.632860@0] fb: osd[2] out_addr_id =0x3 [ 5.640327@0] fb: vpu clkc clock is 199 MHZ [ 5.640340@0] fb: malloc_osd_memory, cma:ffffff800abc76c8 [ 5.640342@0] fb: malloc_osd_memory, 1283, base:0x0000000077800000, size:8388608 [ 5.640344@0] fb: use ion buffer for fb memory, fb_index=3 [ 5.643315@0] meson-fb meson-fb: create ion_client ffffffc0dcbb5d80, handle=ffffffc0d4faf440 [ 5.643321@0] meson-fb meson-fb: ion memory(3): created fb at 0x00000000ea600000, size 8 MiB [ 5.643323@0] fb: Frame buffer memory assigned at [ 5.643326@0] fb: 3, phy: 0x00000000ea600000, vir:0xffffff800fd6a000, size=8192K [ 5.643326@0] [ 5.643329@0] fb: logo_index=0,fb_index=3 [ 5.643331@0] fb: ---------------clear fb3 memory ffffff800fd6a000 [ 5.645677@0] fb: osd[3] canvas.idx =0x42 [ 5.645681@0] fb: osd[3] canvas.addr=0xea600000 [ 5.645683@0] fb: osd[3] canvas.width=128 [ 5.645684@0] fb: osd[3] canvas.height=32 [ 5.645685@0] fb: osd[3] frame.width=32 [ 5.645687@0] fb: osd[3] frame.height=32 [ 5.645688@0] fb: osd[3] out_addr_id =0x4 [ 5.662063@0] hdmitx: system: set frac_rate_policy as 0 [ 5.662087@0] vout: vmode set to custombuilt [ 5.662178@0] fb: current vmode=custombuilt, cmd: 0x10000 [ 5.662181@0] vlock: event MODE_CHANGE_PRE 0 [ 5.662189@0] hdmitx: hdmitx_set_current_vmode[3680] [ 5.662191@0] hdmitx: system: recalc before custombuilt 0 1 [ 5.662194@0] hdmitx: system: recalc after custombuilt 0 1 [ 5.662199@0] hdmitx: system: get current mode: custombuilt [ 5.662201@0] hdmitx: system: update rx hdr info 0 [ 5.662203@0] hdmitx: system: update physcial size: 510 290 [ 5.662245@0] hdmitx: video: already init VIC = 0 Now VIC = 130 [ 5.662248@0] hdmitx: video: rx edid only support RGB format [ 5.662250@0] hdmitx: hw: div40: 0 [ 5.689615@0] hdmitx: ddc w1b error 0x54 0x20 0x00 [ 5.689626@0] hdmitx: this mode doesn't have frac_rate [ 5.689628@0] hdmitx: frac_rate = 0 [ 5.689630@0] hdmitx: hdmitx: set clk: VIC = 130 cd = 4 cs = 0 frac_rate = 0 [ 5.689634@0] hdmitx: [N2][hdmitx_set_clk_] vic == HDMI_CUSTOMBUILT, frac_freq 0 [ 5.689636@0] hdmitx: [N2] hpll_clk_out 0, od1 4, od2 1, od3 2 [ 5.689639@0] hdmitx: config HPLL = 0 frac_rate = 0 [ 5.689642@0] hdmitx: error hpll clk: 0 [ 5.689644@0] hdmitx: m1 0x0, m2 0x0, m 0x3b000400 [ 5.690160@0] hdmitx: pll[0x4000320] reset 10 times [ 5.690161@0] hdmitx: HPLL: 0x1b000400 [ 5.690162@0] hdmitx: config HPLL done [ 5.690166@0] hdmitx: set_hpll_od3_clk_div[610] div = 6 [ 5.690171@0] hdmitx: j = 27 vid_clk_div = 1 [ 5.693208@0] hdmitx: hw: config hdmitx IP vic = 130 cd:4 cs: 0 [ 5.823620@2] hdmitx: video: Sink is HDMI device [ 5.823640@2] hdmitx: hw: set audio [ 5.823646@2] hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 1, hdev->aud_output_ch = 33 [ 5.823656@2] hdmitx: fs = 2, cd = 4, tmds_clk = 0 [ 5.823658@2] hdmitx: hw: aud_n_para = 6272 [ 5.823665@2] hdmitx: hw: set channel status [ 5.824328@0] hdmitx: system: irq 80000001 0 [ 5.851621@2] hdmitx: audio: Audio Type: PCM [ 5.851624@2] vout: new mode custombuilt set ok [ 5.851628@2] fb: current vmode=custombuilt, cmd: 0x20000 [ 5.851633@2] fb: outputmode changed to custombuilt, reset osd0, (0, 0, 1919, 1079) -> (0, 0, -1, -1) [ 5.927615@0] hdmitx: [0x10000103]: 0x00000008 [ 5.927619@0] hdmitx: [0x10000104]: 0x00000001 [ 5.927622@0] hdmitx: [0x10000170]: 0x00000010 [ 5.927624@0] hdmitx: [0x10000180]: 0x000000ff [ 5.927626@0] hdmitx: [0x10000181]: 0x000000ff [ 5.927627@0] hdmitx: [0x10000182]: 0x00000003 [ 5.927629@0] hdmitx: [0x10000183]: 0x00000007 [ 5.927631@0] hdmitx: [0x10000184]: 0x0000003f [ 5.927632@0] hdmitx: [0x10000185]: 0x00000002 [ 5.927635@0] hdmitx: [0x10000187]: 0x000000ff [ 5.927636@0] hdmitx: [0x10000188]: 0x00000003 [ 6.234332@0] fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079) [ 6.234337@0] fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079) [ 7.051821@5] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 7.051840@5] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 7.078735@0] 8021q: 802.1Q VLAN Support v1.8 [ 7.296236@0] fb: osd[0] enable: 1 (kodi.bin) [ 7.827184@0] fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079) [ 7.827187@0] fb: osd_update_disp_axis_hw:dispdata(0,0,-1,-1) [ 8.358106@0] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 8.358108@0] fb: osd_update_disp_axis_hw:dispdata(0,0,-1,-1) [ 8.414206@0] hdmitx: system: irq 80000004 0 [ 8.463621@0] hdmitx: system: plugout [ 8.463641@0] hdmitx: system: update physcial size: 16 9 [ 8.873805@0] hdmitx: system: irq 80000002 0 [ 8.889019@0] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 8.889020@0] fb: osd_update_disp_axis_hw:dispdata(0,0,-1,-1) [ 9.387611@0] hdmitx: system: plugin [ 9.419863@2] vlock: event MODE_CHANGE [ 9.419956@2] fb: osd[0] canvas.idx =0x40 [ 9.419957@2] fb: osd[0] canvas.addr=0xe5800000 [ 9.419958@2] fb: osd[0] canvas.width=5120 [ 9.419959@2] fb: osd[0] canvas.height=1440 [ 9.419960@2] fb: osd[0] frame.width=1280 [ 9.419960@2] fb: osd[0] frame.height=720 [ 9.419962@2] fb: osd[0] out_addr_id =0x1 [ 9.420032@2] vout: aml_tvout_mode_work: monitor stop [ 9.518829@0] hdmitx: edid: EDID Parser: [ 9.518837@0] hdmitx: edid: get dtd0 vic: 4 [ 9.518839@0] hdmitx: edid: get dtd1 vic: 3 [ 9.518850@0] hdmitx: edid: get dtd2 vic: 18 [ 9.518851@0] hdmitx: edid: find IEEEOUT [ 9.518873@0] hdmitx: edid: check sum valid [ 9.518873@0] hdmitx: edid: check sum valid [ 9.518877@0] hdmitx: edid: update rx hdr info 0 at edid parsing [ 9.518878@0] hdmitx: edid: Setting maxTMDSclock from range block [ 9.518880@0] hdmitx: edid: check sum valid [ 9.518881@0] hdmitx: edid: check sum valid [ 9.518884@0] hdmitx: edid: blk0 raw data [ 9.518907@0] hdmitx: edid: [ 9.518907@0] 00ffffffffffff004dd90192010101010813010380502d780a0dc9a057479827 [ 9.518907@0] 12484c20000001010101010101010101010101010101011d007251d01e206e28 [ 9.518907@0] 5500c48e2100001e8c0ad08a20e02d10103e9600c48e21000018000000fc0053 [ 9.518907@0] 4f4e59204156414d500a2020000000fd00313d0f2e08000a202020202020015c [ 9.518907@0] [ 9.518907@0] [ 9.518908@0] hdmitx: edid: blk1 raw data [ 9.518929@0] hdmitx: edid: [ 9.518929@0] 0203297149830405101213141f202f091f070d1f070f1f071507553d07c0835f [ 9.518929@0] 000066030c001100808c0ad090204031200c405500c48e21000018011d00bc52 [ 9.518929@0] d01e20b8285540c48e2100001e00000000000000000000000000000000000000 [ 9.518929@0] 00000000000000000000000000000000000000000000000000000000000000ce [ 9.518929@0] [ 9.518929@0] [ 9.518932@0] hdmitx: system: update physcial size: 800 450 [ 9.518939@0] hdmitx: hdmitx: display colourdepth was 8 in cur_param 0xffffff800aa63a90 (VIC: 130) [ 9.518940@0] hdmitx: system: get current mode: custombuilt [ 9.518941@0] hdmitx: system: update rx hdr info 0 [ 9.518942@0] hdmitx: system: update physcial size: 800 450 [ 9.518962@0] hdmitx: hdmitx: display colourdepth is 10 in cur_param 0xffffff800aa63a90 (VIC: 130) [ 9.518981@0] hdmitx: Bitdepth is set to 10 bits but display does not support deep colour [ 9.518982@0] hdmitx: video: already init VIC = 0 Now VIC = 130 [ 9.518985@0] hdmitx: hw: div40: 0 [ 9.545608@0] hdmitx: ddc w1b error 0x54 0x20 0x00 [ 9.545613@0] hdmitx: this mode doesn't have frac_rate [ 9.545614@0] hdmitx: frac_rate = 0 [ 9.545615@0] hdmitx: hdmitx: set clk: VIC = 130 cd = 4 cs = 2 frac_rate = 0 [ 9.545619@0] hdmitx: [N2][hdmitx_set_clk_] vic == HDMI_CUSTOMBUILT, frac_freq 0 [ 9.545620@0] hdmitx: [N2] hpll_clk_out 0, od1 4, od2 1, od3 2 [ 9.545623@0] hdmitx: config HPLL = 0 frac_rate = 0 [ 9.545624@0] hdmitx: error hpll clk: 0 [ 9.545626@0] hdmitx: m1 0x0, m2 0x0, m 0x3b000400 [ 9.546133@0] hdmitx: pll[0x4000320] reset 10 times [ 9.546135@0] hdmitx: HPLL: 0x1b000400 [ 9.546135@0] hdmitx: config HPLL done [ 9.546139@0] hdmitx: set_hpll_od3_clk_div[610] div = 6 [ 9.546143@0] hdmitx: j = 27 vid_clk_div = 1 [ 9.549217@0] hdmitx: hw: config hdmitx IP vic = 130 cd:4 cs: 2 [ 9.549313@0] hdmitx: system: irq 80000001 0 [ 9.655755@0] hdmitx: [0x10000104]: 0x00000001 [ 9.655762@0] hdmitx: [0x10000180]: 0x000000ff [ 9.655764@0] hdmitx: [0x10000181]: 0x000000ff [ 9.655766@0] hdmitx: [0x10000182]: 0x00000003 [ 9.655768@0] hdmitx: [0x10000183]: 0x00000007 [ 9.655770@0] hdmitx: [0x10000184]: 0x0000003f [ 9.655771@0] hdmitx: [0x10000185]: 0x00000002 [ 9.655774@0] hdmitx: [0x10000187]: 0x000000ff [ 9.655776@0] hdmitx: [0x10000188]: 0x00000003 [ 9.679635@0] hdmitx: video: Sink is HDMI device [ 9.679657@0] hdmitx: hw: set audio [ 9.679664@0] hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 1, hdev->aud_output_ch = 33 [ 9.679675@0] hdmitx: fs = 2, cd = 4, tmds_clk = 0 [ 9.679677@0] hdmitx: hw: aud_n_para = 6272 [ 9.679685@0] hdmitx: hw: set channel status [ 9.707624@0] hdmitx: audio: Audio Type: PCM [ 9.707626@0] hdmitx: hw: set audio [ 9.707628@0] hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 1, hdev->aud_output_ch = 33 [ 9.707638@0] hdmitx: fs = 2, cd = 4, tmds_clk = 0 [ 9.707640@0] hdmitx: hw: aud_n_para = 6272 [ 9.707647@0] hdmitx: hw: set channel status [ 9.735624@0] hdmitx: audio: Audio Type: PCM [ 9.847563@2] vout: vmode set to null [ 9.847650@2] fb: current vmode=custombuilt, cmd: 0x10000 [ 9.847653@2] vlock: event MODE_CHANGE_PRE 0 [ 9.847689@2] vout: new mode null set ok [ 9.847691@2] fb: current vmode=null, cmd: 0x20000 [ 9.847738@2] hdmitx: system: set frac_rate_policy as 0 [ 9.847750@2] vout: vmode set to custombuilt [ 9.847768@2] fb: current vmode=null, cmd: 0x10000 [ 9.847771@2] hdmitx: hdmitx_set_current_vmode[3680] [ 9.847772@2] hdmitx: system: recalc before custombuilt 0 1 [ 9.847775@2] hdmitx: system: recalc after custombuilt 0 1 [ 9.847780@2] hdmitx: hdmitx: display colourdepth was 8 in cur_param 0xffffff800aa63a90 (VIC: 130) [ 9.847780@2] hdmitx: system: get current mode: custombuilt [ 9.847782@2] hdmitx: system: update rx hdr info 0 [ 9.847784@2] hdmitx: system: update physcial size: 800 450 [ 9.847793@2] hdmitx: hdmitx: display colourdepth is 10 in cur_param 0xffffff800aa63a90 (VIC: 130) [ 9.847795@2] hdmitx: Bitdepth is set to 10 bits but display does not support deep colour [ 9.847813@2] hdmitx: video: already init VIC = 0 Now VIC = 130 [ 9.847815@2] hdmitx: hw: div40: 0 [ 9.877607@2] hdmitx: ddc w1b error 0x54 0x20 0x00 [ 9.877611@2] hdmitx: this mode doesn't have frac_rate [ 9.877612@2] hdmitx: frac_rate = 0 [ 9.877614@2] hdmitx: hdmitx: set clk: VIC = 130 cd = 4 cs = 2 frac_rate = 0 [ 9.877617@2] hdmitx: [N2][hdmitx_set_clk_] vic == HDMI_CUSTOMBUILT, frac_freq 0 [ 9.877618@2] hdmitx: [N2] hpll_clk_out 0, od1 4, od2 1, od3 2 [ 9.877620@2] hdmitx: config HPLL = 0 frac_rate = 0 [ 9.877622@2] hdmitx: error hpll clk: 0 [ 9.877623@2] hdmitx: m1 0x0, m2 0x0, m 0x3b000400 [ 9.878131@2] hdmitx: pll[0x4000320] reset 10 times [ 9.878132@2] hdmitx: HPLL: 0x1b000400 [ 9.878132@2] hdmitx: config HPLL done [ 9.878135@2] hdmitx: set_hpll_od3_clk_div[610] div = 6 [ 9.878139@2] hdmitx: j = 27 vid_clk_div = 1 [ 9.881151@2] hdmitx: hw: config hdmitx IP vic = 130 cd:4 cs: 2 [ 9.881241@0] hdmitx: system: irq 80000001 0 [ 9.983609@2] hdmitx: [0x10000104]: 0x00000001 [ 9.983612@2] hdmitx: [0x10000180]: 0x000000ff [ 9.983614@2] hdmitx: [0x10000181]: 0x000000ff [ 9.983615@2] hdmitx: [0x10000182]: 0x00000003 [ 9.983616@2] hdmitx: [0x10000183]: 0x00000007 [ 9.983618@2] hdmitx: [0x10000184]: 0x0000003f [ 9.983619@2] hdmitx: [0x10000185]: 0x00000002 [ 9.983620@2] hdmitx: [0x10000187]: 0x000000ff [ 9.983622@2] hdmitx: [0x10000188]: 0x00000003 [ 10.011625@0] hdmitx: video: Sink is HDMI device [ 10.011647@0] hdmitx: hw: set audio [ 10.011652@0] hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 1, hdev->aud_output_ch = 33 [ 10.011663@0] hdmitx: fs = 2, cd = 4, tmds_clk = 0 [ 10.011665@0] hdmitx: hw: aud_n_para = 6272 [ 10.011672@0] hdmitx: hw: set channel status [ 10.039647@0] hdmitx: audio: Audio Type: PCM [ 10.039654@0] vout: new mode custombuilt set ok [ 10.039659@0] fb: current vmode=custombuilt, cmd: 0x20000 [ 10.039666@0] fb: outputmode changed to custombuilt, reset osd0, (0, 0, 4095, 4095) -> (0, 0, -1, -1) [ 10.422186@0] fb: osd_update_disp_axis_hw:pan_data(0,0,1279,719) [ 10.422190@0] fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079) [ 10.487214@0] hdmitx: system: irq 80000004 0 [ 10.535623@0] hdmitx: system: plugout [ 10.535643@0] hdmitx: system: update physcial size: 16 9 [ 11.394207@0] hdmitx: system: irq 80000002 0 [ 11.483785@0] fb: osd[0] enable: 1 (kodi.bin) [ 11.915613@0] hdmitx: system: plugin [ 12.014545@2] fb: osd_update_disp_axis_hw:pan_data(0,0,1279,719) [ 12.014547@2] fb: osd_update_disp_axis_hw:dispdata(0,0,-1,-1) [ 12.046830@0] hdmitx: edid: EDID Parser: [ 12.046837@0] hdmitx: edid: get dtd0 vic: 16 [ 12.046851@0] hdmitx: edid: get dtd1 vic: 130 [ 12.046852@0] hdmitx: edid: find IEEEOUT [ 12.046872@0] hdmitx: edid: check sum valid [ 12.046873@0] hdmitx: edid: check sum valid [ 12.046876@0] hdmitx: edid: update rx hdr info 0 at edid parsing [ 12.046876@0] hdmitx: edid: Setting maxTMDSclock from range block [ 12.046879@0] hdmitx: edid: check sum valid [ 12.046880@0] hdmitx: edid: check sum valid [ 12.046883@0] hdmitx: edid: blk0 raw data [ 12.046905@0] hdmitx: edid: [ 12.046905@0] 00ffffffffffff004dd90192010101010813010380331d78eadd45a3554fa027 [ 12.046905@0] 12505420000001010101010101010101010101010101023a801871382d40582c [ 12.046905@0] 4500fe1f1100001e000000fe000a202020202020202020202020000000fc0053 [ 12.046905@0] 4f4e59204156414d500a2020000000fd00384c1e5311000a2020202020200169 [ 12.046905@0] [ 12.046905@0] [ 12.046907@0] hdmitx: edid: blk1 raw data [ 12.046927@0] hdmitx: edid: [ 12.046927@0] 0203214141012f091f070d1f070f1f071507553d07c0835f000066030c001100 [ 12.046927@0] 8000000000000000000000000000000000000000000000000000000000000000 [ 12.046927@0] 0000000000000000000000000000000000000000000000000000000000000000 [ 12.046927@0] 0000000000000000000000000000000000000000000000000000000000000034 [ 12.046927@0] [ 12.046927@0] [ 12.046929@0] hdmitx: system: update physcial size: 510 290 [ 12.046935@0] hdmitx: hdmitx: display colourdepth was 8 in cur_param 0xffffff800aa63a90 (VIC: 130) [ 12.046936@0] hdmitx: system: get current mode: custombuilt [ 12.046937@0] hdmitx: system: update rx hdr info 0 [ 12.046938@0] hdmitx: system: update physcial size: 510 290 [ 12.046957@0] hdmitx: hdmitx: display colourdepth is 10 in cur_param 0xffffff800aa63a90 (VIC: 130) [ 12.046976@0] hdmitx: Bitdepth is set to 10 bits but display does not support deep colour [ 12.046976@0] hdmitx: video: already init VIC = 0 Now VIC = 130 [ 12.046979@0] hdmitx: video: rx edid only support RGB format [ 12.046980@0] hdmitx: hw: div40: 0 [ 12.073621@0] hdmitx: ddc w1b error 0x54 0x20 0x00 [ 12.073630@0] hdmitx: this mode doesn't have frac_rate [ 12.073631@0] hdmitx: frac_rate = 0 [ 12.073633@0] hdmitx: hdmitx: set clk: VIC = 130 cd = 4 cs = 0 frac_rate = 0 [ 12.073637@0] hdmitx: [N2][hdmitx_set_clk_] vic == HDMI_CUSTOMBUILT, frac_freq 0 [ 12.073639@0] hdmitx: [N2] hpll_clk_out 0, od1 4, od2 1, od3 2 [ 12.073641@0] hdmitx: config HPLL = 0 frac_rate = 0 [ 12.073644@0] hdmitx: error hpll clk: 0 [ 12.073645@0] hdmitx: m1 0x0, m2 0x0, m 0x3b000400 [ 12.074153@0] hdmitx: pll[0x4000320] reset 10 times [ 12.074154@0] hdmitx: HPLL: 0x1b000400 [ 12.074154@0] hdmitx: config HPLL done [ 12.074157@0] hdmitx: set_hpll_od3_clk_div[610] div = 6 [ 12.074161@0] hdmitx: j = 27 vid_clk_div = 1 [ 12.074225@4] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 12.074227@4] fb: osd_update_disp_axis_hw:dispdata(0,0,-1,-1) [ 12.075254@4] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31) [ 12.075255@4] fb: osd_update_disp_axis_hw:dispdata(0,0,-1,-1) [ 12.077240@0] hdmitx: hw: config hdmitx IP vic = 130 cd:4 cs: 0 [ 12.077329@0] hdmitx: system: irq 80000001 0 [ 12.087376@4] vlock: event MODE_CHANGE [ 12.179618@0] hdmitx: [0x10000104]: 0x00000001 [ 12.179624@0] hdmitx: [0x10000180]: 0x000000ff [ 12.179626@0] hdmitx: [0x10000181]: 0x000000ff [ 12.179628@0] hdmitx: [0x10000182]: 0x00000003 [ 12.179630@0] hdmitx: [0x10000183]: 0x00000007 [ 12.179631@0] hdmitx: [0x10000184]: 0x0000003f [ 12.179633@0] hdmitx: [0x10000185]: 0x00000002 [ 12.179635@0] hdmitx: [0x10000187]: 0x000000ff [ 12.179637@0] hdmitx: [0x10000188]: 0x00000003 [ 12.207618@0] hdmitx: video: Sink is HDMI device [ 12.207638@0] hdmitx: hw: set audio [ 12.207643@0] hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 1, hdev->aud_output_ch = 33 [ 12.207654@0] hdmitx: fs = 2, cd = 4, tmds_clk = 0 [ 12.207656@0] hdmitx: hw: aud_n_para = 6272 [ 12.207664@0] hdmitx: hw: set channel status [ 12.235627@0] hdmitx: audio: Audio Type: PCM [ 12.235632@0] hdmitx: hw: set audio [ 12.235636@0] hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 1, hdev->aud_output_ch = 33 [ 12.235647@0] hdmitx: fs = 2, cd = 4, tmds_clk = 0 [ 12.235650@0] hdmitx: hw: aud_n_para = 6272 [ 12.235657@0] hdmitx: hw: set channel status [ 12.263624@0] hdmitx: audio: Audio Type: PCM [ 13.003282@0] hdmitx: system: irq 80000004 0 [ 13.051627@0] hdmitx: system: plugout [ 13.051653@0] hdmitx: system: update physcial size: 16 9 [ 13.460202@0] hdmitx: system: irq 80000002 0 [ 13.963611@5] hdmitx: system: plugin [ 14.094828@5] hdmitx: edid: EDID Parser: [ 14.094836@5] hdmitx: edid: get dtd0 vic: 4 [ 14.094837@5] hdmitx: edid: get dtd1 vic: 3 [ 14.094846@5] hdmitx: edid: get dtd2 vic: 18 [ 14.094848@5] hdmitx: edid: find IEEEOUT [ 14.094866@5] hdmitx: edid: check sum valid [ 14.094866@5] hdmitx: edid: check sum valid [ 14.094869@5] hdmitx: edid: update rx hdr info 0 at edid parsing [ 14.094870@5] hdmitx: edid: Setting maxTMDSclock from range block [ 14.094872@5] hdmitx: edid: check sum valid [ 14.094873@5] hdmitx: edid: check sum valid [ 14.094875@5] hdmitx: edid: blk0 raw data [ 14.094891@5] hdmitx: edid: [ 14.094891@5] 00ffffffffffff004dd90192010101010813010380502d780a0dc9a057479827 [ 14.094891@5] 12484c20000001010101010101010101010101010101011d007251d01e206e28 [ 14.094891@5] 5500c48e2100001e8c0ad08a20e02d10103e9600c48e21000018000000fc0053 [ 14.094891@5] 4f4e59204156414d500a2020000000fd00313d0f2e08000a202020202020015c [ 14.094891@5] [ 14.094891@5] [ 14.094892@5] hdmitx: edid: blk1 raw data [ 14.094907@5] hdmitx: edid: [ 14.094907@5] 0203297149830405101213141f202f091f070d1f070f1f071507553d07c0835f [ 14.094907@5] 000066030c001100808c0ad090204031200c405500c48e21000018011d00bc52 [ 14.094907@5] d01e20b8285540c48e2100001e00000000000000000000000000000000000000 [ 14.094907@5] 00000000000000000000000000000000000000000000000000000000000000ce [ 14.094907@5] [ 14.094907@5] [ 14.094909@5] hdmitx: system: update physcial size: 800 450 [ 14.094916@5] hdmitx: hdmitx: display colourdepth was 8 in cur_param 0xffffff800aa63a90 (VIC: 130) [ 14.094917@5] hdmitx: system: get current mode: custombuilt [ 14.094918@5] hdmitx: system: update rx hdr info 0 [ 14.094919@5] hdmitx: system: update physcial size: 800 450 [ 14.094934@5] hdmitx: hdmitx: display colourdepth is 10 in cur_param 0xffffff800aa63a90 (VIC: 130) [ 14.094936@5] hdmitx: Bitdepth is set to 10 bits but display does not support deep colour [ 14.094952@5] hdmitx: video: already init VIC = 0 Now VIC = 130 [ 14.094956@5] hdmitx: hw: div40: 0 [ 14.121615@5] hdmitx: ddc w1b error 0x54 0x20 0x00 [ 14.121619@5] hdmitx: this mode doesn't have frac_rate [ 14.121620@5] hdmitx: frac_rate = 0 [ 14.121622@5] hdmitx: hdmitx: set clk: VIC = 130 cd = 4 cs = 2 frac_rate = 0 [ 14.121624@5] hdmitx: [N2][hdmitx_set_clk_] vic == HDMI_CUSTOMBUILT, frac_freq 0 [ 14.121625@5] hdmitx: [N2] hpll_clk_out 0, od1 4, od2 1, od3 2 [ 14.121627@5] hdmitx: config HPLL = 0 frac_rate = 0 [ 14.121629@5] hdmitx: error hpll clk: 0 [ 14.121630@5] hdmitx: m1 0x0, m2 0x0, m 0x3b000400 [ 14.122138@5] hdmitx: pll[0x4000320] reset 10 times [ 14.122139@5] hdmitx: HPLL: 0x1b000400 [ 14.122140@5] hdmitx: config HPLL done [ 14.122142@5] hdmitx: set_hpll_od3_clk_div[610] div = 6 [ 14.122146@5] hdmitx: j = 27 vid_clk_div = 1 [ 14.125157@5] hdmitx: hw: config hdmitx IP vic = 130 cd:4 cs: 2 [ 14.255604@5] hdmitx: video: Sink is HDMI device [ 14.255621@5] hdmitx: hw: set audio [ 14.255625@5] hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 1, hdev->aud_output_ch = 33 [ 14.255635@5] hdmitx: fs = 2, cd = 4, tmds_clk = 0 [ 14.255637@5] hdmitx: hw: aud_n_para = 6272 [ 14.255644@5] hdmitx: hw: set channel status [ 14.256296@0] hdmitx: system: irq 80000001 0 [ 14.283619@5] hdmitx: audio: Audio Type: PCM [ 14.283621@5] hdmitx: hw: set audio [ 14.283623@5] hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 1, hdev->aud_output_ch = 33 [ 14.283633@5] hdmitx: fs = 2, cd = 4, tmds_clk = 0 [ 14.283634@5] hdmitx: hw: aud_n_para = 6272 [ 14.283641@5] hdmitx: hw: set channel status [ 14.311618@5] hdmitx: audio: Audio Type: PCM [ 14.359625@0] hdmitx: [0x10000103]: 0x00000008 [ 14.359631@0] hdmitx: [0x10000104]: 0x00000001 [ 14.359634@0] hdmitx: [0x10000170]: 0x00000010 [ 14.359636@0] hdmitx: [0x10000180]: 0x000000ff [ 14.359637@0] hdmitx: [0x10000181]: 0x000000ff [ 14.359639@0] hdmitx: [0x10000182]: 0x00000003 [ 14.359641@0] hdmitx: [0x10000183]: 0x00000007 [ 14.359642@0] hdmitx: [0x10000184]: 0x0000003f [ 14.359644@0] hdmitx: [0x10000185]: 0x00000002 [ 14.359646@0] hdmitx: [0x10000187]: 0x000000ff [ 14.359648@0] hdmitx: [0x10000188]: 0x00000003 [ 15.032025@0] hdmitx: system: irq 80000004 0 [ 15.083623@0] hdmitx: system: plugout [ 15.083649@0] hdmitx: system: update physcial size: 16 9 [ 15.938662@0] hdmitx: system: irq 80000002 0 [ 16.459619@0] hdmitx: system: plugin [ 16.590839@0] hdmitx: edid: EDID Parser: [ 16.590848@0] hdmitx: edid: get dtd0 vic: 16 [ 16.590862@0] hdmitx: edid: get dtd1 vic: 130 [ 16.590864@0] hdmitx: edid: find IEEEOUT [ 16.590885@0] hdmitx: edid: check sum valid [ 16.590886@0] hdmitx: edid: check sum valid [ 16.590890@0] hdmitx: edid: update rx hdr info 0 at edid parsing [ 16.590891@0] hdmitx: edid: Setting maxTMDSclock from range block [ 16.590894@0] hdmitx: edid: check sum valid [ 16.590895@0] hdmitx: edid: check sum valid [ 16.590898@0] hdmitx: edid: blk0 raw data [ 16.590921@0] hdmitx: edid: [ 16.590921@0] 00ffffffffffff004dd90192010101010813010380331d78eadd45a3554fa027 [ 16.590921@0] 12505420000001010101010101010101010101010101023a801871382d40582c [ 16.590921@0] 4500fe1f1100001e000000fe000a202020202020202020202020000000fc0053 [ 16.590921@0] 4f4e59204156414d500a2020000000fd00384c1e5311000a2020202020200169 [ 16.590921@0] [ 16.590921@0] [ 16.590923@0] hdmitx: edid: blk1 raw data [ 16.590944@0] hdmitx: edid: [ 16.590944@0] 0203214141012f091f070d1f070f1f071507553d07c0835f000066030c001100 [ 16.590944@0] 8000000000000000000000000000000000000000000000000000000000000000 [ 16.590944@0] 0000000000000000000000000000000000000000000000000000000000000000 [ 16.590944@0] 0000000000000000000000000000000000000000000000000000000000000034 [ 16.590944@0] [ 16.590944@0] [ 16.590946@0] hdmitx: system: update physcial size: 510 290 [ 16.590953@0] hdmitx: hdmitx: display colourdepth was 8 in cur_param 0xffffff800aa63a90 (VIC: 130) [ 16.590955@0] hdmitx: system: get current mode: custombuilt [ 16.590957@0] hdmitx: system: update rx hdr info 0 [ 16.590958@0] hdmitx: system: update physcial size: 510 290 [ 16.590978@0] hdmitx: hdmitx: display colourdepth is 10 in cur_param 0xffffff800aa63a90 (VIC: 130) [ 16.590981@0] hdmitx: Bitdepth is set to 10 bits but display does not support deep colour [ 16.590998@0] hdmitx: video: already init VIC = 0 Now VIC = 130 [ 16.591000@0] hdmitx: video: rx edid only support RGB format [ 16.591002@0] hdmitx: hw: div40: 0 [ 16.617614@0] hdmitx: ddc w1b error 0x54 0x20 0x00 [ 16.617627@0] hdmitx: this mode doesn't have frac_rate [ 16.617630@0] hdmitx: frac_rate = 0 [ 16.617632@0] hdmitx: hdmitx: set clk: VIC = 130 cd = 4 cs = 0 frac_rate = 0 [ 16.617636@0] hdmitx: [N2][hdmitx_set_clk_] vic == HDMI_CUSTOMBUILT, frac_freq 0 [ 16.617638@0] hdmitx: [N2] hpll_clk_out 0, od1 4, od2 1, od3 2 [ 16.617641@0] hdmitx: config HPLL = 0 frac_rate = 0 [ 16.617643@0] hdmitx: error hpll clk: 0 [ 16.617645@0] hdmitx: m1 0x0, m2 0x0, m 0x3b000400 [ 16.618153@0] hdmitx: pll[0x4000320] reset 10 times [ 16.618155@0] hdmitx: HPLL: 0x1b000400 [ 16.618156@0] hdmitx: config HPLL done [ 16.618159@0] hdmitx: set_hpll_od3_clk_div[610] div = 6 [ 16.618164@0] hdmitx: j = 27 vid_clk_div = 1 [ 16.621233@0] hdmitx: hw: config hdmitx IP vic = 130 cd:4 cs: 0 [ 16.751610@0] hdmitx: video: Sink is HDMI device [ 16.751633@0] hdmitx: hw: set audio [ 16.751640@0] hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 1, hdev->aud_output_ch = 33 [ 16.751651@0] hdmitx: fs = 2, cd = 4, tmds_clk = 0 [ 16.751653@0] hdmitx: hw: aud_n_para = 6272 [ 16.751660@0] hdmitx: hw: set channel status [ 16.752301@0] hdmitx: system: irq 80000001 0 [ 16.779627@0] hdmitx: audio: Audio Type: PCM [ 16.779633@0] hdmitx: hw: set audio [ 16.779636@0] hdmitx: hw: hdmitx tx_aud_src = 1, audio_param->channel_num = 1, hdev->aud_output_ch = 33 [ 16.779648@0] hdmitx: fs = 2, cd = 4, tmds_clk = 0 [ 16.779650@0] hdmitx: hw: aud_n_para = 6272 [ 16.779658@0] hdmitx: hw: set channel status [ 16.807625@0] hdmitx: audio: Audio Type: PCM [ 16.855621@0] hdmitx: [0x10000103]: 0x00000008 [ 16.855626@0] hdmitx: [0x10000104]: 0x00000001 [ 16.855630@0] hdmitx: [0x10000170]: 0x00000010 [ 16.855631@0] hdmitx: [0x10000180]: 0x000000ff [ 16.855633@0] hdmitx: [0x10000181]: 0x000000ff [ 16.855635@0] hdmitx: [0x10000182]: 0x00000003 [ 16.855636@0] hdmitx: [0x10000183]: 0x00000007 [ 16.855638@0] hdmitx: [0x10000184]: 0x0000003f [ 16.855640@0] hdmitx: [0x10000185]: 0x00000002 [ 16.855642@0] hdmitx: [0x10000187]: 0x000000ff [ 16.855644@0] hdmitx: [0x10000188]: 0x00000003 [ 62.475603@2] fb: mem_free_work, free memory: addr:800000