Amlogic-no Discussion

Development Development & Testing
305

And it installed, and file added
https://paste.coreelec.org/2nhxdA

306 
[    9.942090] meson-g12a-pinctrl pinctrl@ff634480: pin GPIOX_0 already requested by ffe03000.sdio; cannot claim for periphs-banks:476
[    9.942097] meson-g12a-pinctrl pinctrl@ff634480: pin-65 (periphs-banks:476) status -22
[    9.942102] OpenVFD: can't request gpio of gpio_clk
[    9.942108] openvfd: probe of openvfd failed with error -22

will need to check what is different

1 Like
307

I know already, we will see if it solves itself with new kernelā€¦

1 Like
308

Which method it boots for you?

With toothpick method or just plugging in the stick and power on the box?

309

not helped
https://paste.coreelec.org/PZYnAB

310

I will check it later

1 Like
311

write generic.img.gz into sd card, choice dtb, insert into box, plug power :person_tipping_hand:

312

@as_id I did re-upload the nightly 20240201. So please download again and update with the tar or do burn the img.gz again. Now OpenVFD may start working, please test it!

1 Like
313

ok, some minutes

ps. now itā€™s work. Great job :+1:
https://paste.coreelec.org/sZPW6U

1 Like
314

Opens OK. :slight_smile: X96 max + ( 905x3_4Gb)
.ts files stop after about 5 seconds. No sound also.
Then sound stops working on other files unless rebooted.
What do I need to give you to help?
Kodi log still doesnā€™t show anything I can see?

315

https://wiki.coreelec.org/coreelec:ce_support

316

https://paste.coreelec.org/CZANif

X96 max + ( 905x3_4Gb)
.ts files stop after about 5 seconds. No sound also.
Then sound stops working on other files unless rebooted.
some mp4 as well. Log for .ts.

317

So weird that your box works this way and i get a bootloop. These dtb files are so picky.

318

This answer is a bit offtopic, but it seems not so much CE users have an UART adapter.

I guess the reason is a lot of the CE users have not enough experience/knowledge and don`t know which adapter they need and how it works or if it works at all.

Perhaps it makes sense to open an extra posting where the experienced users who have such an UART adapter can share some information which adapters they bought and for which device they work.

Possible much more users will buy such an adapter then and the CE team can get much more UART logs to improve CoreELEC.

320

You need to switch to eMMC boot. CoreELEC will not boot in SPI mode!

321

Thanks
it is working now.

1 Like
322

Perhaps x96max+ has many different revision, or may be to try different sd card, Iā€™m used Sony 8gb 10 class

323 
CoreELEC (official): 21.0-Omega_nightly_20240202 (Amlogic-no.aarch64)
      Machine model: Amlogic
     CoreELEC dt-id: sm1_s905x3_4g_1gbit

CoreELEC:~ # dmesg | paste
https://paste.coreelec.org/QnzKTG

326

flashed the latest nightly (first time user of coreelec no) to sd and tried to bootā€¦ nothing. when i switch to spi, i can see petitboot. unfortunately, i cant find the uart adapter, so i cant provide any useful logs. its on a odroid n2. black screen, nothing seems to happen. also no blue LED turning on or so

327

Try another sd card and check after flashing
I run NO on my N2 - You have to saerch on Your side
ItĀ“s no Coreelec fault