Please use this thread for general 19.2-Matrix_rc2 discussion

I have problem with m8s plus dvb - with DTB gxl_p231_1g_m8s_dvb.dtb. Alles gut apart from built in DVB tuna. I install tvheadend + latest kernel dvb drivers but tvheadend says no tuna install. In /dev/dvb/adaptor0 devices are populated but no tuna appears in tvheadend conf.

@kshi : no I didn´t update my bootloader. I wouldn´t even know how :wink: I guess I have some research to do. Maybe that helps with the crashes. The Box is indeed based on a 905X chip so that fits but as I said I never had any issues with the thermals prior to 19.2 rc2

@nanashikun I can get you pointed in the right direction. What you need to do is find a version of Android 7.1 or greater that will install to your box, the bootloader is installed during this process. A lot of people have had great success with ATVxperience or Aidan’s Rom. @Garcea has posted links…

@kshi thanks for the thorough explanation. I actually found a 8.0 Android yesterday that I burned. Doesn’t seem to be making any difference though. I will probably return to 9.2.7 for the time being and wait for the final.

Thank You to the devs for all the work! These old boxes ain’t dead yet! Running the CoreELEC 19.2-Matrix_rc2 (June 6th, 2021) on 2 different 2GB S905X boxes. As per kshi’s post, just reflash the boxes back to stock Android firmware using USB Burning tool and you’re good to go. I’ve also used the…

Hi @all, I’ve a problem with some RTSP-Streams (for example local Reolink Webcam) since the first CoreELEC Matrix builds (no issue when using 9.2.X legacy builds.). Build: 9.2-Matrix_rc2 Device: S905X3 device. The stream stutters heavily after 2-3 seconds after the playback starts and stays like…

Hi to all, Build: 19.2-Matrix_rc2 Device: Odroid N2 TV : LG OLEDCX9LA Question : does suspend work properly on 19.2-Matrix_rc2 on N2 ? Did I miss something ? I have Power Saving set on Suspend and also CEC Adapter but my N2 goes to shutdown and red LED on N2 turns off. Pictures in attach…wha…

After freshly installing the latest version and restoring my backed up data, all my artwork is missing. I checked the tar file and there’s no thumbnails folder, I added the thumbnails folder from an old back up to \storage.kodi\userdata\ but the artwork still isn’t showing. I then backed up and de…

You wrote: "As per kshi’s post, just reflash the boxes back to stock Android firmware using USB Burning tool " Wait a second… :thinking: kshi said to flash to one of the custom 7.1.2 ROMs since the stock ROMs on those devices have never been updated and are stuck on the 6.0 ROM versions.

Backing up artwork was disabled in 9.2.x because it usually took way too long and took up way too much space. In CE 19.x you now have a choice where you can select to backup the artwork or not.

CoreELEC Forums

CoreELEC 19.2-Matrix_rc2 Discussion

Development Development & Testing

About | FAQ | Terms of Service | Privacy Policy | Legal Notice