CoreELEC 19.4-Matrix Discussion

Development Development & Testing
17

Thank you so much.

Updated to 20220221 and remote power on is working for me as well.

1 Like
18

hi
Just updated from RC3 to 19.4
i have strange reading from hardware info
cpu is reported as S922x rev b in coreelec
i have N2 plus it reported as rev c in previous RC3
i did a check from ssh. cpu clocks seem normal but serial sugests its rev B, i newer checked from ssh before so i dont know if that reading is also wrong,also i newer heard of N2 plus with rev b ?
not really an issue just strange

CoreELEC:~ # cat /proc/cpuinfo
processor       : 0
BogoMIPS        : 48.00
Features        : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant     : 0x0
CPU part        : 0xd03
CPU revision    : 4

processor       : 1
BogoMIPS        : 48.00
Features        : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant     : 0x0
CPU part        : 0xd03
CPU revision    : 4

processor       : 2
BogoMIPS        : 48.00
Features        : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant     : 0x0
CPU part        : 0xd09
CPU revision    : 2

processor       : 3
BogoMIPS        : 48.00
Features        : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant     : 0x0
CPU part        : 0xd09
CPU revision    : 2

processor       : 4
BogoMIPS        : 48.00
Features        : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant     : 0x0
CPU part        : 0xd09
CPU revision    : 2

processor       : 5
BogoMIPS        : 48.00
Features        : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant     : 0x0
CPU part        : 0xd09
CPU revision    : 2

Serial          : 290b4000012110000011383232583350
model name      : Amlogic S922X rev b
Hardware        : Hardkernel ODROID-N2Plus
19

It looks like Amlogic did remove revision c as it’s same as revision b. But in kernel there is only take care about rev.a and rev.b but not about rev.c.

So the bootloader bl2 blob do “cheat” rev.b as there is no real difference, maybe. We also have no official statement about it. Maybe rev.c is just something different in manufacturing process but the function is same as rev.b.

20

Anyway to get 19.4 working on a Tronsmart Vega S95 Talos? Its a S905 processor with 2gb ram and 1Gbit ethernet.

21

No, unsupported SoC for CE 19. Last working variant is CE 9.2.8. You could try LE 11 (hit or miss regarding at codecs) if you want latest Kodi variants.

22

@robbie3x your issue should be solved with tomorrow nightly 20220309

23

Sorry: End Of Life for Legacy devices.

24

8 posts were merged into an existing topic: Audio Sync Issue

26

Hello, i have an X96 max plus and after updating from 19.3 (usb) i get the following in the splash screen.

Cannot initialize conversion from codepage 850 to ANSI_X3.4-1968: Invalid argument
Cannot initialize conversion from ANSI_X3.4-1968 to codepage 850: Invalid argument
Using internal CP850 conversion table.

Is there a way to fix it, thanks in advance.

27

And this text stays on screen or the device boots fine?

1 Like
28

At first no but after a few reboots (disconnecting and connecting) it started to work fine it just display the message for a second before the splash screen, i think is working fine now, thanks.

29

I had the same short message on a Ugoos Am6 device, its a very short message so i have to take a
handy video to indentify it.
Then I test a fresh install on a SD Card, with the same result
So I make a complete new Installation from the Box (new Android Image with USB burning tool)
After that the message is gone

30

It also happened with a fresh install (with Libreelec usb burning tool) but Coreelec is working the same as usual. I did upgrade from a backup on the emmc just to check and there is no message, mounting error maybe.
With a fresh install it did not gave any problems except for the message.

32

24 posts were split to a new topic: High CPU usage by banned Addons

34

Tried to update X96 S905x3 from 19.3 to 19.4. Unfortunately there is stuttering on some 4K videos. No errors, and hardware decoded. The same 4K video plays very smooth on 19.3.

35

Try latest nightly. If the same then upload file sample and log.

36

Please remind:
https://wiki.coreelec.org/coreelec:troublesteps#before_posting_an_error

45

A post was merged into an existing topic: Ce19.4 's emby-next-gen and embycon can’t play

46

Hallo,
A95Max S905X2 Problem ausschalten shutdown geht nicht.
Android 8.1 neu geflascht und SD Karte mit Corelec 19.4 neu installiert.
Box beim runterfahrem permanent reboot.
bei Coreelec 19.3 ist alles okay.
ist es möglich g12a_s905x2_4g_1gbit.dtb 19.4 gegen eine ältere Version <19.4 replace zu tauschen
LG

Hi there,
A95Max S905X2 problem switch off shutdown does not work.
Reflashed Android 8.1 and reinstalled SD card with Corelec 19.4.
Box permanently reboot when shutting down.
with Coreelec 19.3 everything is ok.
is it possible to replace g12a_s905x2_4g_1gbit.dtb 19.4 with an older version <19.4 replace
LG

1 Like
47

We have German speakers in the team but this is an English only forum. Please translate.

1 Like