HI, das tauschen einer dtb aus der 19.3. “sollte” zum testen kein problem sein. ich musst auch bei meinem S905X2 eine andere dtb nehmen, da ich eine Fake Box hatte und mit der, die du hier genannt hast, meine Box nicht bootete. probier es einfach aus. Kannst ja nichts kaputt machen. Sicher Dir einfach die aktuelle auf den Rechner weg und nimm die funktionierende aus der 19.3.
HI, swapping a dtb from 19.3. "should not be a problem for testing. I also have to use another dtb with my S905X2 because I had a fake box and the one you mentioned here didn’t boot my box. just try it. You can’t break anything. Just save the current one on your computer and take the working one from 19.3.
I know, i know. No log, no problem.
But i got problems with hdmi-cec since 19.4 rc versions, i start a movie and totally random breaks the hdmi-cec down, no warning only the remote works not anymore. I had the same issue with a previous version, there has the hdmi-cec driver change helped. I try to do a log, later.
Beelink gt-king pro, LG tv, logitech harmony touch remote
ok i needed a lot of time to bring the issue back, i got a log but its over 50 mega and the system cant upload it (failed to paste log files, try again). i uploaded this here: 50.9 MB file on MEGA
on the last 10-20 min could something happen before that worked.
I had exactly the same issue a little while back and found that when replacing with an older DTB on an updated image that it would prevent the box from starting at all.
I tested a variety of DTB’s and Portisch tried to help out with a custom DTB but that did not work.
I think that it might require the application of an SDIO Debug Board to provide the right information or the right DTB to be created.
In addition, of course, we have to accept that whilst the A95X Max box has worked, it is not officially supported, so we can’t have an expectation for things to work correctly all of the time.
What I do now, before I switch my box off, is to SSH in and run the command systemctl stop kodi
This stops Kodi and leaves the box in a state here it should generally feel safe to switch off without risking any form of Kodi corruption.
So far, touch wood, I have not experienced any issues.
I have never used the suspend feature before but I ran it and it seemed to suspend for about 20 seconds before waking up but giving me a black screen, although I can see that the TV is seeing the box. I can ssh into it and reboot from there. I also tried the power off funtion again and it rebooted.
It’s somehow related to your Android image. And your device use some gpio different to standard. So if it goes down it check this gpio and resume as it think like power button pushed.
Helpful will be you open your box and attach real UART line so bootloader messages are recorded as well. It will tell us the reason for wakeup.