CoreELEC 21.0-Omega_alpha1 Amlogic-ne Discussion

[vpeter]

Most discussion happens here: Homatics Box R 4K Plus

I don’t know if IR receiver on RockTek G2 exists (I think not) but even if it does (like with Dune version) wake up is not possible.

[frodo19]

You need reboot to android, and there sleep the device.
No IR receiver in Rocktek, and Nokia.

From Portisch:
Power consumption Homatics R4 Plus with 5V DC IN:

GUI, idle:		2.9W
AV1:			4.0W
HLG:			3.6W
H264, 1080p:	3.2W
DV 8.1, 4k:		3.9W
DV MEL, 1080p:	3.4W
Power off:		0.12W
Suspend:		0.64W

[rome1931]

You can the wake the from suspend by switching to its cec input.

[grappi]

Thank you for all your answers.

[Doktor-X]

What is future of s905x3 for now, will it get converted to ne or will it get left behind on ng

[Portisch]

Still on may, maybe never.
There are already new SoC on market so nobody interests on old ones.

[avin]

Confirm using 21.0-Omega_nightly_20230505 with
s4_s905w2_2g_v4.dtb MD5 ce1aa2c1e0c00b6e36615d1b98649b0a
Tanix W2 2+16G can now boot normally and install to emmc fine.

5G wifi still only WPA2, no WPA3 or mixed encryption.

Btw, IR remote both work out of the box in 20.1 and 21.0 without the need for remote.conf, but XB360 joystick is not working in 21.0 for UI control.

[iirigoyen21]

Yo tengo tanix tx3 mini+ s905w2 de 4/64 y no me funciona el DTB (s4_s905w2_4g)
de core 20.1 con instalación nueva para core21

He probado coreelec 21 ne con el dtb s4_s905w2_4g.
CoreELEC-Amlogic-ne.aarch64-21.0-Omega_alpha1-Generic.img.gz
No me inicia a traves de la tarjeta microsd
qué dtb tengo que usar?
Tengo que usar ng?
o aun no hay dtb?
gracias

I have tanix tx3 mini+ s905w2 from 4/64 and the DTB does not work for me (s4_s905w2_4g)
CoreELEC-Amlogic-ne.aarch64-21.0-Omega_alpha1-Generic.img.gz
from core 20.1 with fresh install for core21

I have tested coreelec 21 ne with the dtb s4_s905w2_4g. It does not start me through the microsd card
do i have to use ng version?
what dtb do i have to use?
or is there still no dtb?
thank you

[Portisch]

English?

Amlogic-ne, New Era

Amlogic-ne, New Era Team CoreELEC is proud to present project Amlogic-ne (New Era). For months, the team has worked tirelessly to build an “almost finished” product, ready for the first public test release. Team CoreELEC would like to thank all those who helped to get this project off the ground, no matter how small or large their contribution. Special thanks go to Beelink and Khadas for helping us with the implementation of the new T7 (A311D2) platform, and BuzzTV for their generous hardwar…

[avin]

Check this thread, just discussed the very topic.
U need to use the 21 ne nightly build for the updated s905w2 dtb.

[gujal]

H96 Max X4 Android 11 Amlogic S905X4 device with 4GB RAM and 100Mbps Ethernet port

CE21NE works great from microSD with DTB sc2_s905x4_4g.dtb file
VFD and Remote also work fine with the files in the repository

Thanks for the awesome NE branch

[patkino]

Vim4 not booting neither of nighties. Stuck on khadas boot logo.
I suppose its somehow refers to hdmi output, cuz it did boot when connected to pc display

[Portisch]

Vim4 have a UART header, make a log. I just worked today with vim4, booting fine…

[patkino]

Sorry, im not that advanced to make logs with uart…
Thing is - 20.1 works fine.
21alpha boots fine when using a pc display and installs correctly.
At the same time installed 21alpha doesn’t boot on a regular 1080p tv, as well as setup of 21alpha, which stucks on khadas logo

[Portisch]

I will ask tomorrow my today foggy magic ball…

[patkino]

All right, I’ll disassemble the chips on the board, analyze the response of semiconductors to signals, and send a printout of the punched card. Just asking the developer - is too easy and funny)

[Portisch]

It’s a bit easier: VIM4 GPIO Header [Khadas Docs]
New USB 2.0 to TTL UART 5PIN Module Serial Converter CP2102 STC PRGMR Free cable | eBay

[Mark22]

Sounds like you’ve been around long enough to know some stuff, why dont you join the team and help?

[patkino]

Issue fixed in 0606 nightly