These instructions were done several versions ago. For your projector (supports DV) and the latest version T4 you do not need to go through those instructions since the software will read you projector information and use default values, just leave the VSVDB Block off. You can still follow those instructions if you do want to insert the VSVDB Block AND do not know your projector’s specs including how much nits your projector has. If you do know your projector’s specs including how much nits your projector has then you do NOT need those steps either just follow the menu options available on the screen and it will generate the VSVDB Block for you. If you do want to override the VSVDB Block without following the screen menu options available then you will need the spreadsheet below to generate the VSVDB Block for you.
dolby_vsvdb_calc_MOD_6.xlsm (59.3 KB)