i installed Coreelec, setup hyperion.ng on my S912.
enabled Boblight Server, thats all what i can do in hyperion.ng
if the client connects to hyperion.ng the source automatical goes to Boblightserver (seeing in Remote.Source selection) to version 100.1 this source is automatical set when i send data or an color-effect.
as i know hyperion.ng switch automatical to source with a higher prio.
boblight client takes frames yes, but can control with an command to setup leds effects to, but this does not working too… never light up.
with the andorid app you can send boblight command to the server, the source must switch permamently to Boblightserver, but does not (i can see an source-selection for ~1 sec in webconfig) when i press the connect button on left corner in the android app ( must setting the right ip and port before in settings)
the hardware is an arduino nano connected to my s912 with usb on TTYUSB0,
the lights working like charm when watching an movie, (Amlogic Grabber)
i switched the internal framegrabber off for testing, set random prio to boblightserver… all the same, no source but the client says connection is up!
i disable the framegrabber with hyperion-remote control web interface (there are all sources with play/stop button on the interface,>Platform Aufnahme)
(ich habe mal einen debug log vom der 100.3er angehängt, vieleicht hängt es mit dem PriorityMuxer zusammen???)
ive attach an debug log from100.3,seems problem with PriorityMuxer???
100.3 error.txt (19.2 KB)
(So sieht die Remote Source bei 100.1 aus wenn ich einen Boblight Client aktiviere (in diesem fall die Android app))
thats the remote/source selection from 100.1 when activate an boblight client (this time i start the android app bobdroid and connect)
