Nightly builds

i loaded other nightly gt king and stays and beelink screen forever do u know how to fix and where ng generic builds are i cant find them


got it back up and running thx

Hi! Since the last 3 or 4 nightlies, I am experiencing slowdowns in liveTV, and it persist till a reboot, then it work ok again.

Don’t know if is anything related with hyperion again.

The box is a 905x without any changes since months.

What can I do to help you find the problem?

We have not changed anything for 3.14 kernel builds in the past week or two.

[[SOLVED] by…:smiley:
I Changed Repeat delay to 150 ms .
But it will change back to 500ms after I reboot the box.

How can I keep repeat delay is 150ms?

Thank you.

CoreELEC:~ # ir-keytable -D 150 -P 100
Repeat delay = 150 ms, repeat period = 100 ms
Changed Repeat delay to 150 ms and repeat period to 100 ms
CoreELEC:~ # reboot
CoreELEC (official): nightly_20190831 (Amlogic-ng.arm)
CoreELEC:~ # ir-keytable -D 150 -P 100
Repeat delay = 500 ms, repeat period = 125 ms
Changed Repeat delay to 150 ms and repeat period to 100 ms

You also need to type it into

Can you please add realtek 8811cu drivers on ng build plz. It was working on stable non ng build. Thank you!

8811cu driver is already in ng builds. I only tested it with non ng builds though.

Tested again just right now, working on non ng stable 9.0.3 but not on last ng nightly. RTL8811CU

It’s possible that this driver is not functional with kernel 4.9. I have no way to test the ng build, my only Amlogic device is Le Potato board.

I’ll upload dmesg as soon i’ve access to my device (x96max 2g/16g)

Can you test this build? I built it with another version of the driver.

1 Like

Hello, am I alone unable to play the AAC 5.1 ?

No need to read, just listen. :slight_smile:
What exactly is the problem? Sample, log?

1 Like


Thank you for your build but it didn’t work :
here is dmesg

For info i use g12a_s905x2_2g.dtb

On a new try with another usb wifi network card plugged i got this :
May be it can help


And since now you can use official Confluence skin to access CoreELEC settings :slight_smile:


HI @smp,
Please find 2 posts above associated dmesg with your build.
(same output with last nightly).
Or let me know how to integrate drivers, i know how to build coreelec from source but don’t know how to integrate drivers…
Thanks in advance,

HI @smp
I found this
and this
but i can’t figure how to build…