Below are the video settings which we recommend for Kodi v18 Leia, by default our builds will use these settings unless you have changed them. Settings > Player > Videos Adjust display refresh rate => On start / stop Sync playback to display => disabled Settings > System > Display Whitelist…

I write my first question in the forum, I hope you have patience. My configuration is: CoreELEC 8.95.7 SD boot on Amlogic 912 device (Beelink GT1 Ultimate), Screen 4kHDR 75 inch (Samsung QE75Q7FNATXZT) For me it is very tempting to have both the 4k GUI (in such a big screen you can really perceive…

@Freitag73 no I’m sorry that will not work, HDR will not activate with the above configuration. On a side note you are incorrect, your TV will only upscale if Kodi resolution is 1080 or below, if you are running Kodi at 4K and watch some 1080 content then Kodi will handle the upscaling which is bad…

thanks, now everything works as I wanted. I had to remember to force the TV screen adaptation function (from Auto to On). last brief note: the restore to default command of the video section has no effect on: whitelist, resolution, frequency, calibration. restores only double buffering selection

Thanks adamg, I’ve been a bit confused about the whitelisting feature, never knew how to configure it! So now we shouldn’t select anything in there at all right?

It was necessary to define a whitelist in earlier releases but you do not need to any more unless your TV can’t handle certain resolutions or refresh rates.

[image] anon88919003: if you are running Kodi at 4K and watch some 1080 content then Kodi will handle the upscaling which is bad because generally your TV will upscale better than Kodi will. Why is scaling in Kodi bad exactly? I understand software scaling can be slow (especially HQ) but I’d …

Running 4k videos (remux, etc), without whitelist, i get 2160p 24hz. (Only some files from 4kmedia etc goes 60hz). To run 60hz, i have to whitelist it, and for some reason in that case i loose HD audio (dd+ ok) (H96 pro+ s912; denon avr x2100w; viewsonic px727).

Using a Beelink GT King (S922x) I only get playback if I whitelist. Resolution set to 4k @ 59.94. with 4K 60/59.94/50 and 1080p 29.97/23.98 selected at the moment.

Hi I have a problem while I try to play hevc uhd video files with my N2. I don’t know what is the correct technical term for this issue (I’m sorry I’m a newbie) when I play uhd hevc movies, the video doesn’t fit the screen, it looks like 10 times zoomed. And if I don’t stop the video all kodi menus…

See instructions in this post: [image] Gui at 3840 x 2160 Odroid N2/N2Plus/C4 Right solution: systemctl stop kodi delete all resolution related sections from guisettings.xml systemctl start kodi

CoreELEC Forums

Recommended Kodi Settings

Kodi

About | FAQ | Terms of Service | Privacy Policy | Legal Notice