Hi. I am a user of coreelec and dvb-t tuner on Realtek RTL2832 chipset and everything is OK, I bought a new dvb-t2 tuner this time, Terratec Cinergy TC2 unfortunately tvheadend does not detect it. What can I do to make it visible through tvheadend?
Have you tried all the driver modules? Dvb-latest and crazycat?
Yes I tried, coreelec default drivers, drivers for TBS and driver from the latest kernel.
I found such a thread on another forum but I don’t know how to do it in the Coreelec system.
When you use CoreELEC 19 Matrix you can try this crazycat addon.
Open a SSH connection and run:
cd downloads
megadl https://mega.nz/file/6HxCWbaQ#-Eyff6cA4fSI3s4HcztteVz7hjJCK1kxijH3TtAMKLc
sync
Then install the addon from zip file.
Or you just download driver.dvb.crazycat-19.0.0.zip on any other way and install it on your device.
Please remember to reboot once after install the addon!
Hi. Thanks a lot for your quick help. On Coreelec Matrix 19 on tv-box x96 mini it detects the tuner in tvheadend after installing driver.dvb.crazycat-19.0.0.zip. Is there a chance that it will work on the older version of Coreelec on the tv-box on the s912 chipset? Shouldn’t it detect DVB-T2 ? The attached picture shows only DVB-T.
Everything is Ok, the description is actually DVB-T but it normally searches for DVB-T2 programs. On the tv-box with the s912 chipset, the attempt to install the driver.dvb.crazycat-19.0.0.zip does not work because there is a problem with dependencies. Is there a version of these drivers for older versions of the Coreelec system? Thank you.
No, only for CE-19
Hi. The Terratec Cinergy TC2 dvb-t tuner does not search for channels although the driver.dvb.crazycat drivers are installed and updated, the tuner is seen in the system as ID 048d:9306 Integrated Technology Express, Inc. IT930x DVB stick. What else can I do to make the tuner search for channels? So far, everything has been OK. Best regards. Greg
Hi. The Terratec Cinergy TC2 dvb-t tuner does not search for channels although the driver.dvb.crazycat drivers are installed and updated, the tuner is seen in the system as ID 048d:9306 Integrated Technology Express, Inc. IT930x DVB stick. What else can I do to make the tuner search for channels? So far, everything has been OK. Best regards. Greg
Before scanning:
CoreELEC:~ # systemctl stop service.tvheadend43.service
or
CoreELEC:~ # systemctl stop service.tvheadend42.service
and
CoreELEC:~ # t2scan -Y PL >chann.conf
t2scan -Y PL
t2scan version 20200628 (compiled for DVB API 5.11)
using settings for POLAND
DVB aerial
DVB-T Europe VHF and UHF
scan type TERRESTRIAL, channellist 14
output format vdr-2.1
WARNING: could not guess your codepage. Falling back to ‘UTF-8’
output charset ‘UTF-8’, use -I to override
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 → TERRESTRIAL “Silicon Labs Si2168”: very good :-))
Using TERRESTRIAL frontend (adapter /dev/dvb/adapter0/frontend0)
---- Getting frontend capabilities----
FE_READ_STATUS failed: 121 Remote I/O error
Using DVB API 5.11
frontend ‘Silicon Labs Si2168’ supports
DVB-T2
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
BANDWIDTH_AUTO not supported, trying 6/7/8 MHz.
MULTISTREAM
FREQ (48.00MHz … 870.00MHz)
-----------------------_
Scanning DVB-T…
Scanning 7MHz frequencies…
177500 (CH5): (time: 00:01.303) no signal
184500 (CH6): (time: 00:03.311) signal ok: QAM_AUTO f = 184500 kHz I999B7C999D999T999G999Y999 (0:0:0)
QAM_64 f = 184500 kHz I999B7C56D0T8G4Y0 (8808:13313:28673) : scanning for services
service = Metro (Emitel)
service = Zoom TV (Emitel)
service = Nowa TV (Emitel)
service = WP (Emitel)
service = Legia TV (Emitel)
service = UA Perszyj (Emitel)
service = test5 (Emitel)
service = test6 (Emitel)
service = EmiRadio (Emitel)
service = EmiTV (Emitel)
191500 (CH7): (time: 00:05.851) no signal
198500 (CH8): (time: 00:07.867) ^C
ERROR: interrupted by SIGINT, dumping partial result…
(time: 00:09.303) dumping lists (10 services)
no channel search…
Can anyone help ?