Dolby vision is not triggering on my TV when using the TV led mode, player led does trigger it but it is pink and green. I am running latest nightly no branch.
cat /sys/class/amhdmitx/amhdmitx0/dv_cap
DolbyVision RX support list:
VSVDB Version: V2
2160p60hz: 1
Parity: 0
Support mode:
DV_RGB_444_8BIT
DV_YCbCr_422_12BIT
LL_YCbCr_422_12BIT
IEEEOUI: 0x00d046
EMP: 0
VSVDB: eb0146d0004d0a8a7e6c8775
dmesg | egrep -i '(dv|dolb|dov)'
[ 0.000000] Kernel command line: systemd.show_status=auto init=/init console=ttyS0,921600 no_console_suspend earlycon=aml-uart,0xfe078000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 loop.max_part=4 scramble_reg=0xfe02e030 otg_device=1 logo=osd0,loaded,0x3e800000 vout=2160p60hz,enable panel_type=lcd_1 hdmitx=, hdmimode=2160p60hz hdmichecksum=0xd1380000 dolby_vision_on=0 hdr_policy=1 hdr_priority= frac_rate_policy=0 hdmi_read_edid=1 cvbsmode=576cvbs osd_reverse=0 video_reverse=0 irq_check_en=0 androidboot.selinux=permissive androidboot.firstboot=1 jtag=disable disable_ir=0 usb3_off=0 androidboot.bootloader=01.01.241028.170257 androidboot.hardware=amlogic mac=30:F9:47:0D:6F:CF androidboot.mac=30:F9:47:0D:6F:CF androidboot.factory_flag=testok androidboot.wificountrycode=US androidboot.serialno=SK12403002273 BOOT_IMAGE=kernel.img boot=LABEL=COREELEC disk=LABEL=STORAGE console=tty0 no_console_suspend keymap=us remotewakeup=0xffffffff decode_type=0 remotewake
[ 0.000000] get_amdv_on: 0, 0
[ 0.850312] Advanced Linux Sound Architecture Driver Initialized.
[ 1.075215] aml_dvb_extern_init: OK, version: V1.26
[ 1.141932] amdolby_vision_init:module init
[ 1.142468] amdolby_vision probe start & ver: 20240626
[ 1.142879] amdv_init_receiver(dvel)
[ 1.142885] amdv_init_receiver: dvel
[ 1.143466] dovi disable in uboot
[ 1.330008] DOLBY: vout_notify_callback: VOUT_EVENT_MODE_CHANGE
[ 1.623534] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 1.624397] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 1.627172] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 1.627768] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 1.633824] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 1.634473] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 2.177719] usb 1-1: New USB device found, idVendor=04a6, idProduct=1507, bcdDevice= 2.00
[ 3.003030] usb 5-1: New USB device found, idVendor=0bda, idProduct=9210, bcdDevice=20.01
[ 9.998031] mali fe400000.valhall: clock dvfs cfg table size is 6
[ 9.998113] mali fe400000.valhall: clock dvfs table size is 6
[ 16.184686] dovi_gen_5_15_stb26: disagrees about version of symbol module_layout
[ 16.184704] please rebuild ko: dovi_gen_5_15_stb26
[ 16.184713] dovi_gen_5_15_stb26: module license 'AML' taints kernel.
[ 16.185484] dovi_gen_5_15_stb26: disagrees about version of symbol __stack_chk_fail
[ 16.185497] please rebuild ko: dovi_gen_5_15_stb26
[ 16.186449] [dovi_gen_5_15_stb26]: *** amlogic_dolby_vision_init dv: gen ***
[ 16.186463] error: dolby vision get fail ko, version: Shenzhen Sei Robotics Co., Ltd chip_name = gen [stb:2.6:e]-[v1.0]-[Tue Aug 27 14:41:20 CST 2024]-[jialong.jiang]-[]-[]-[]-[0]
[ 16.186473] dv capability 7
[ 16.186475] *** register_dv_stb2.6_functions.***
[ 16.186677] [dovi_gen_5_15_stb26]: Creating DV mp success
[ 16.186891] [dovi_gen_5_15_stb26]: Creating DV mp success
[ 16.186902] enable DV HLG when stb v2.6. policy 123