The system always detects the Eoft&Gamut value as SDR BT.709 in HDR, HLG broadcasts.
The broadcast in the picture is HLG broadcast format
Confirmed, when booting CE first and then powering TV on results in black screen.
https://paste.coreelec.org/RHaSub
This is known issue what was worked on already. But your TV send an EDID also when powered off. So Kodi does not “see” the hotplug and do not re-init the display engine. Not sure how to proper solve it.
1 Like
But the problem is not in ng
I think there must be a difference in the kernel versions
Same issue but it was working before the last 2 nightlies.
What changed in those?
Hi,
I am still having problems after upgrading to the latest version, although the changelog says HDMI 4k is fixed. (CoreELEC-Amlogic-no.aarch64-21.0-Omega_nightly_20240223.tar)
On startup, the picture looks fine on the TV (2160p, 50Hz), but if I switch to a different input on my home cinema amplifier and then back again, the home cinema amplifier doesn’t recognize the input signal format from then on.
dmesg: https://paste.coreelec.org/yAqKFj
debug log: https://paste.coreelec.org/9l07FY
(all lines for pvr.iptvsimple are deleted from the log)
This is not a 4k issue, it’s a “hotplug” issue and as said above it is worked on.
2 Likes
Thanks.
Strange because I had no problems until one of the updates this week.
new kernel, just wait 
Anyone got the 20240209 nightly tar still flying around so I can somewhat use this device until the fix drops?
With new nightly 20240226 the hotplug should finally work on 5.15.119.
1 Like
Thanks,yes hotplug worked
2 Likes
I was trying to attach some logs to a reply but get this message
“An error occurred: Sorry you cannot post a link to that host.”
hastebin was used.
At any rate the Latest Nightly-no 02262024 on a sm1_s905x3_4g_1gbit X96 Max+ 4gb
It only Boots cpu 0
[ 5.094670] CPU1: failed to come online
[ 5.094693] CPU1: failed in unknown state : 0x0
[ 10.220368] CPU2: failed to come online
[ 10.220388] CPU2: failed in unknown state : 0x0
[ 15.346022] CPU3: failed to come online
[ 15.346040] CPU3: failed in unknown state : 0x0
Full log and fresh install?
Use dmesg | paste after boot.
This issue should have been solved since a few nighties. Maybe this device have another regulator need to be enabled for CPU.
Please also make a dmesg | paste with current NG nightly.
I tried that it gave the following error
“An error occurred: Sorry you cannot post a link to that host.”
See if it works now
Nope same error
An error occurred: Sorry you cannot post a link to that host.
no, you had http://paste.kodi.tv/ not http://paste.coreelec.org/
I added now a rule to ignore in spam filter:
http://paste.kodi.tv/
http://paste.coreelec.org/
http://pastebin.com/
Nightly no Build 02262024 sm1_s905x3_4g_1gbit X96 Max+ 4gb/32gb
Only one cpu boots the others fail
I tried this on 3 different s905x3 boxes with the same results for the cpu’s
CoreELEC-19-ng Works and boots all cpu’s
Nightly Log
https://paste.kodi.tv/vuvapazeyi
CoreELEC-19 Log
https://paste.kodi.tv/onoqorogag
This file is only 70MB, does not look right to me?