try this
https://relkai.coreelec.org/CoreELEC-Amlogic-ng.arm-9.2-nightly_20200210-Generic.img.gz
Tried the CoreELEC-Amlogic-ng.arm-9.2-nightly_20200210-Generic.img build and get the same results.
sm1_s905x3_4g.dtb boots the Droix X3 into CoreELEC without working wifi, lan and bluetooth whereas sm1_s905x3_4g_1gbit.dtb sits on a black screen. I see a little flash or two on my USB stick to some some activity after the device boot logo on screen and then nothing.
Solved after the last “nightly” update.
Thanks
Ran through each dtb using the latest CoreELEC-Amlogic-ng.arm-9.2-nightly_20200218-Generic.img build on the Droix X3 and here are the results using both the internal NIC and an external USB NIC.
Not working - Permanent black screen on the TV.
g12a_s905x2_2g_1gbit.dtb
g12a_s905x2_4g_1gbit.dtb
sm1_s905d3_khadas_vim3l.dtb
sm1_s905x3_2g_1gbit.dtb
sm1_s905x3_4g_1gbit.dtb
Not working - Continual Reboots.
g12b_a311d_khadas_vim3.dtb
g12b_s922x_odroid_n2.dtb
g12b_s922x_odroid_n2_dvb.dtb
g12b_s922x_ugoos_am6.dtb
g12b_s922x_ugoos_am6_rev_a.dtb
Not working - Continual Reboots & Corrupt boot Logo.
g12b_s922x_beelink_gt_king.dtb
g12b_s922x_beelink_gt_king_rev_a.dtb
CoreELEC Working but with no detected network or bluetooth devices (internal or external)
(Note: Both g12a device trees boot the initial partition formating screen and once complete require a hardware reboot before loading CoreELEC. The sm1 device trees do not require this extra step.)
g12a_s905x2_2g.dtb
g12a_s905x2_4g.dtb
sm1_s905x3_2g.dtb
sm1_s905x3_4g.dtb
This thread is not monitored for help and support, tou can not just try any device tree and hope for the best, the key is in the naming of them.
Based on the spec of the box the correct device tree is sm1_s905x3_4g.
If network is not working then it needs to be brought to our attention in a more appropriate thread, ie nightlies, you also haven’t said whether this is just wireless or wired or both that isn’t working.
As you have tried an external NIC as well it could be that the driver is missing but again these are all separate issues that need raising.
For issues with nightly releases yes.
Amlogic S905X3 may be use 9.2.1 version coreelec?
No, you need to use the Amlogic-ng nightly builds.
my origin system is android 9.0 maybe use amlogic-ng nightly?
Unable to boot system it still enter Android 9
so you downloaded the correct ng build,you then copied the correct dtb from the dtb folder, renamed it to dtb.img & copied it to the root of the usb/sd card
you then held the reset button in, while plugging in the power lead. after a few seconds, you release the reset button?
if you did that perhaps you have not used the correct device tree(dtb)
thx Succeed
Remote control cannot be used without return key
x96 max plus remote control can not use
2.4G remote control without return keyboard
you need to search the forum for remote control.
NEW Repo for Remote files (Thanks to Betatester)
apparently, the x92 works
thx bro
put three files in the root directory of the U disk？
did not work
rc map.cfg and x96 and x96_remote.png
Put it in the root directory of U disk？
No, you need to read the instructions in the first link
Copy x92_remote to /storage/.config/rc_keymaps
Copy rc_maps.cfg to /storage/.config
I don’t know about the xml file
then reboot
You really have the ability to share. Thank you, boss
I have learnt a lot from people here, & if I can help others, so be it.
perhaps, over time, as you learn, you can offer help.