@Portisch, the problem is that I have X96 Max 4/64 with the codes I sent and I can’t turn it on with the IR remote. Everything else is working fine now.
Thanks.
Please make a new log tomorrow as it will include some more information, thx!
did the injection tool also come for the old S905(?) models?
in future somewhere, yes
Hello!
X2 Cube (s905x2)
IR remote
Power OFF - ok
Power ON - ok (after injecting BL301)
Goto SUSPEND - ok
but
wake up from SUSPEND - NO
power led turns to red but TV has no picture (just black screen)
I will try to describe the behavior of the box: (sorry for my bad english)
1: Power OFF
Pressed the power button on remote and the box is shutdowning - OK
power led and lan led are ON (lan sometimes blinking)
Then pressed the power button again - the box is starting and everething is OK
2: SUSPEND
Pressed SUSPEND and the box is suspending - OK
Pressed the power button on remote and power led turns to VERY BRIGHT RED and lan led turns off - TV screen is still black. (looks like the box is frozen)
Press power button again and box starting like it was power off (full system loading)
Where? In CoreELEC power options?
Yes, in CE power options
ok, you have a ssh connection after resume when the TV is black?
If yes type: ce-debug and post the link.
Also dmesg | paste please
no ssh connection
Then before enter suspend:
Go to Settings->CoreELEC->System->Upload config…
And post the shown link
You have correct uppercase/lowercase of the link? It show nothing usefull.
ahh, it’s :http://ix.io/1SOD
I don’t see any problem, so it have to be a different gpio number or something else.
Since now it’s time to get a UART adapter and a serial connection to the device.
I will try if I find something in google…
I am quite sure the 4-pin not mounted header right/bottom is the UART header:
What will be better ?
USB - TTL (UART) CH340G
USB - TTL (UART) CP2102
USB - TTL (UART) PL2303HX
I know the CH340G, you need a special driver on Windows 
But it is working (Arduino clone)
I know the PL… too, we don’t use it anymore as adapter - to much where not working…
I have a CP2102 adapter, works perfectly in Windows 10.
If I buy adapter, you can tell me what should I do next whis it?
And. Android on the board working correct. Maybe in it has info about gpio?