BL301 injection completed. I modified the file config.ini with 3 codes, and it doesnt power on the box… Magicsee N5 Max… here the messages of injection and a dmesg to see whats up with the non working power off/ON button
I think you forgot to execute command mount -o remount,rw /flash before changes in config.ini
or just forgot to remove #
And lines that doesn’t contain values should be commented (1st line in your file above)
first line doesnt appear as commented for a copy/paste error, I think magicsee N5 dont catch this, if someboby achieve it, please, comment it, thank you
yes it has been done this way, I will repeat, and I can put here the screens step by step but I think it is rightly done… So if somebody has achieved it on a magicsee N5 Max, please, comment it, beacause I dont know if I am doing something wrong… thank you
Thanks, now I see the problem! The autoscript is not getting updated. I know this issue already but there is no fix yet. Please try this: fw_setenv upgrade_step 3
And then reboot.
After reboot you can try the IR wake up again!
Also please post again after reboot the result of: fw_printenv bootfromsd
Thx!
hi ! good morning! You mean with ‘try the IR wake up again’ to repeat with this?
systemctl stop kodi
systemctl stop eventlircd
ir-keytable -u
mount -o rw,remount /flash
nano /flash/config.ini
Or you mean to push the wake up button on de IR??
I have done the first, the process to map the wake up button to the IR, and the result after reboot → fw_printenv bootfromsd is:
CoreELEC (official): nightly_20190815 (Amlogic-ng.arm)
CoreELEC:~ # fw_printenv bootfromsd
bootfromsd=mmcinfo; run cfgloadmmc; if fatload mmc 0 ${loadaddr} kernel.img; then run sddtb; setenv bootargs ${bootargs} bootfromsd; bootm; fi
Thanks a lot, I hope we will be near to get success
Regards,
David
PD: Yeeeeeeessss!!! We have achieved it!!! well, you guide me on the success way, Thank you very much @Portisch !!! Hope This trial have been good for all to get working right more tvbox!!
It should work already
By the command fw_setenv upgrade_step 3 the bootloader got forced to reload the aml_autoscript.
And the ouput of fw_printenv bootfromsd shows the update: ...cfgloadmmc...
So since now you config.ini get loaded and IR wakeup should work now…
The forced update of the aml_autoscript will be tomorrow in the next nightly, thank you for testing it!
Device serial number: 290a400001201200000c303254524d50
Using CPU type G12B (29): S922X, A311D
System is not supported by BL301.bin injection: g12b_s922x_odroid_n2
CoreELEC:~ #