General   Guides & How-tos

Please use the CoreELEC Wiki: https://wiki.coreelec.org/coreelec:ce_addon CoreELEC Settings Hardware Section There are some different options to customize the used device. Please keep in mind that some option may be …

BL301.BIN Injection Some Amlogic devices do have problems with wake-up from suspend/power off by IR remote, CEC or WOL, this is related to a poorly configured bootloader. This is the reason for the new tool that we hav…

Combining multiple remote keymaps for use with meson-ir As an example I will cofigure the mce and khadas remotes to be used together. edit /storage/.config/rc_maps.cfg so that it contains the following meson-ir …

RU Team CoreELEC ceemmc tool This tool is written by Team CoreELEC and exclusive for Amlogic devices running CoreELEC! This tool ceemmc can be used for a safe installation of CoreELEC to internal eMMC storage. U…

Please follow new CoreELEC Wiki https://wiki.coreelec.org/coreelec:debuglogs Before posting a error Did you try a clean install? How the error can be reproduced? If your issue is not solved by a clean install: Plea…

Please check out our guides section before opening a thread, by using the recommended installation and update methods, most of the time you will encounter no issues with your CoreELEC installation. With that said as wit…

I found this post by kszaq to be very useful, as it combines the convenience of dual boot with speed of internal installation while retaining the safety of booting from external media. A word of caution: Be aware, as y…

By far, the simplest way to update CoreELEC would be to enable the Auto Update feature. To do so, start the CoreELEC Configuration addon and, to the right hand side of the first screen, you will see the Updates section. …

IR remote controls can be configured in 1 of 2 ways in CoreELEC, both are detailed in this guide below. meson-ir meson-ir allows you to use almost any IR remote controller to control your device. CoreELEC uses meson-i…

Update Please follow the more recent installation guide on CoreELEC Wiki New installation Prepare an SD card (class 10) / USB flash drive as follows; NOTE: On some devices, only 1 USB port is able to boot the device,…