CE-22 NO: Looking for users with no working WiFi or BT

Development
290

Driver for 0x4339 will be included with tomorrow nightly, so please also try tomorrow with a clean fresh install if WiFi is working now.

I did try to scan but no SSID was found. Not sure what is the case.

I hope no other devices do break WiFi with tomorrow update :crossed_fingers:t2:.

1 Like
291

With clean install : Wifi & BT is OK

But WiFi canā€™t connect on boot

I have a shared MySQL DB, Kodi is bootlooping until I plug wired network :frowning:

292

The current driver does not work for 0x4339, will need to do more searching.

The driver used on CE-NG is very very old and far away from beeing compatible with 5.15 kernelā€¦

1 Like
294

The driver used on CE-NG is very very old and far away from beeing compatible with 5.15 kernelā€¦

OK. The driver in CE-NE (kernel 5.4.210) does work just fine with this box (I run CE-21 on the NE kernel regularly on this model). Thatā€™s still old, but not as old as NG.

295

Can you please boot with CE-NE once and make dmesg | paste? After it boot again CE-NO and ensure tmate is enabled again, thx.

296

https://paste.coreelec.org/CarlsonKirsty is from CE-NE. It booted and connected to wifi, no problem.

297

I canā€™t see any wifi, it wonā€™t connect to my wifi either. My X96s doesnā€™t have an ethernet port.

last working version is 20250903

last tested version is 20251010 and stil not view any wifi. s905y2_4g

298

No log, no problem.

299

No wifi, no logā€¦

Log from 20250903 / last working version (wifi) for me

CE-22 NO: Looking for users with no working WiFi or BT - #273 by sol052

300
301

Get a spare usb and copy paste an autostart.sh script containing this

dmesg > dmesg.txt

And copy and paste the logs to your working system and upload it to pastebin or something

302

You can make a log this way I think .

Turn on logging in Kodi settings

In Corelec settings at the bottom you can make a running log and it gives you a web address to copy and paste into your post above.

303

That probably doesnā€™t work if you donā€™t have a connection but thatā€™s another methodā€¦

1 Like
304

Ugoos AM9:

  1. latest nightly
  2. Ugoos AM9
  3. Dont know, did not test
  4. udevadm info /sys/bus/sdio/devices/* | paste ā†’ no such device
  5. paste.coreelec.org/AgendaFacility
    6.1) paste.coreelec.org/CauldronReign
    6.2) paste.coreelec.org/AccessedMessy
  6. paste.coreelec.org/EndorseSinister
305

There are issues with last nightly / 20251017. (removed) Edit: and replaced with some updates)

306

My Minix U22-XJ just updated to 20251018 nightly and wifi is gone. Blank screen in Connections.
Is this expected? Iā€™ll try to get logs off somehow tomorrow.

307

Minix U22-XJ no more wifi - https://paste.coreelec.org/MindsHurts

308

You have g12b_s922x_minix_u22xj_rev_a while my one here is g12b_s922x_minix_u22xj_max where it works fine.
So you might connect ethernet and open tmate so we can take a look when we get time:

309

The 20251021 nightly build seems to have fixed the wifi issue with the 4339 chip on both an Rbox HK1 and Vontar X4 (theyā€™re clones of each other). Wifi and BT are both working. Thanks!

2 Likes
310

Hmmmmmm

Thx for info ,will have a test on Hk1x4 RBOX, have been using NE for months now..

1 Like