It maybe you don’t need a crystal ball 
As I wrote wifi should work. It works on other devices but not on yours. So to get it working for you too you need to help us with some data. Or just live without. Or buy one device and send it to one of the devs.
It is completely your choice.
Then please do not request or expect any support.
Contact your box seller for support, thank you.
2 Likes
Btw: From LE forum
There are 3 Different wifi modules for the TX5Pro:
Qualcomm QCA9377 or QCA1023
Ampak AP6255
Fn-Link 8223A
This means fabri2 doesn’t have QCA9377 !
Ok, i opened my box and on wifi chip there was “FN-LINK 8223A-SR”
1 Like
Please post a request there with the debug information:
Do you have the access point thing turned on the in CE wi-fi settings? Try turning it off and reboot and see if you can see some networks… I see nothing there if I have the AP thing turned on (since CE19, it worked ok CE 9), when I turn it off, they come up (using the Odroid wifi adapator (5, I think?))
Thank you. No problem to upgrade the ugoos am6 plus 
from rc2. This time I tried a Wireless connection. My AP uses the same SSID for both WiFi bands. At first, the ugoos connected to the 5 GHz band. But I had frequent buffering because there are several obstacles in between. Then I replaced the AP with another and the ugoos connected to 2.4 GHz and it was better, no more buffering as long as I played only full HD Blu-ray.
Is there a defined logic in CE to chose one or the other WiFi band or is this something at a lower level, out of (y)our control ?
If necessary, I can change the 5 GHz SSID to force the connection to 2.4 GHz.
I have trouble with CEC in the current build. Receiver and TV do not get switched off although it is enabled in the settings.
Using two different boxes: Odroid N2+ and a Tanix TX3 (S905x3)
Hi All,
Is the CEC Issues fixed with the N2 now in RC4 ?
Thanks
I use some basic CEC functions and experience no issues. Anything specific you are worried about …?
No, the issue is still there. Volume control works fine, but the AVR remains powered on although it should be turned off. 
Hi, there
Something changed in kodi 19 advancedsettings video buffer vs. Player.ProgressCache infobar?
The picture show kodi 18 and 19 with same advancedsettings.xml settings
cache
buffermode 1
memorysize 557842432
readfactor 20
cache
Kodi 18 fill the cache and visible bottom progressbar how to fill that, debuginfo show in mb forward cache.
Kodi 19 top progressbar, there not visible how to fill the cache, and that not shown in debug info just 0mb forward cache.
Its a bug or I need change something in my system?
Use this Version on my Egoiggo s95x 2GB, new Installation, use no Wifi or Ethernet only USB Harddrive. If I start a Movie, all works well, but after ca. 30sec the Video stopped and the Box is rebooting. Tried 2 times with the same result. The Box works fine with an much older Version.
Hi
CoreElec 19.1 Matrix don’t working on GT1 Ultimate(S912) dtb(gxm_q200_3g)?
Will it ever be compatible?
Regards.
No, never.
S912 is no longer in development
This behaviour is to be expected. Your box is not compatible with CE 19 Matrix due to bootloader being too old, Android 6.x would be my guess. You can try an android custom rom to elevate bootloader to recommended 7.1.x or stick to CoreElec 9.2.x.
1 Like
After trying on x88king i must write: the best temperature of box was on ver 19.0 (40 celzium degree), after on 19r2 was some higher (44 celzium degree) and now on 19rc4 is 46 celzium degree during of same iptv watching. Something is bad.
Whilst you may have seen an increase in temps, 46C is still very good indeed.
1 Like
My N2 4GB has cec problem with latest builds. It wakes up my TV in unpredicatable moments. Journalctl does not show anything, box does not reboot. Anyone saw this feature on his box?