It looks like Amlogic did remove revision c as it’s same as revision b. But in kernel there is only take care about rev.a and rev.b but not about rev.c.
So the bootloader bl2 blob do “cheat” rev.b as there is no real difference, maybe. We also have no official statement about it. Maybe rev.c is just something different in manufacturing process but the function is same as rev.b.
No, unsupported SoC for CE 19. Last working variant is CE 9.2.8. You could try LE 11 (hit or miss regarding at codecs) if you want latest Kodi variants.
Hello, i have an X96 max plus and after updating from 19.3 (usb) i get the following in the splash screen.
Cannot initialize conversion from codepage 850 to ANSI_X3.4-1968: Invalid argument
Cannot initialize conversion from ANSI_X3.4-1968 to codepage 850: Invalid argument
Using internal CP850 conversion table.
At first no but after a few reboots (disconnecting and connecting) it started to work fine it just display the message for a second before the splash screen, i think is working fine now, thanks.
I had the same short message on a Ugoos Am6 device, its a very short message so i have to take a
handy video to indentify it.
Then I test a fresh install on a SD Card, with the same result
So I make a complete new Installation from the Box (new Android Image with USB burning tool)
After that the message is gone
It also happened with a fresh install (with Libreelec usb burning tool) but Coreelec is working the same as usual. I did upgrade from a backup on the emmc just to check and there is no message, mounting error maybe.
With a fresh install it did not gave any problems except for the message.
Tried to update X96 S905x3 from 19.3 to 19.4. Unfortunately there is stuttering on some 4K videos. No errors, and hardware decoded. The same 4K video plays very smooth on 19.3.
Hallo,
A95Max S905X2 Problem ausschalten shutdown geht nicht.
Android 8.1 neu geflascht und SD Karte mit Corelec 19.4 neu installiert.
Box beim runterfahrem permanent reboot.
bei Coreelec 19.3 ist alles okay.
ist es möglich g12a_s905x2_4g_1gbit.dtb 19.4 gegen eine ältere Version <19.4 replace zu tauschen
LG
Hi there,
A95Max S905X2 problem switch off shutdown does not work.
Reflashed Android 8.1 and reinstalled SD card with Corelec 19.4.
Box permanently reboot when shutting down.
with Coreelec 19.3 everything is ok.
is it possible to replace g12a_s905x2_4g_1gbit.dtb 19.4 with an older version <19.4 replace
LG
HI, das tauschen einer dtb aus der 19.3. “sollte” zum testen kein problem sein. ich musst auch bei meinem S905X2 eine andere dtb nehmen, da ich eine Fake Box hatte und mit der, die du hier genannt hast, meine Box nicht bootete. probier es einfach aus. Kannst ja nichts kaputt machen. Sicher Dir einfach die aktuelle auf den Rechner weg und nimm die funktionierende aus der 19.3.
HI, swapping a dtb from 19.3. "should not be a problem for testing. I also have to use another dtb with my S905X2 because I had a fake box and the one you mentioned here didn’t boot my box. just try it. You can’t break anything. Just save the current one on your computer and take the working one from 19.3.