hallo
Recently I updated my A95X Max box from 19.3 to 19.4.rc2 stable image, and have a
problem to switch off.Coreelec 19.4 Nightly Test shutdown the unit, it immediately reboots
Whenever I want to shutdown the unit, it immediately reboots.
2. ssh mount -o remount,rw /flash
fdtput -d /flash/dtb.img /auge_sound spk_mute-gpios
sync
reboot
Problem problem to switch off the unit, it immediately reboots
Hi support,
I have an issue that make a black screen when start and/or stop video, mainly UHD.
Other users have the same see here, this is NOT solved, only a workaround is to change the HDMI input in the AVR and go back to CoreElec player.
In the test I played jellyfish 180mbps, had the black screen then “no input” from the TV. At the end it came back fine to the menu. You will find it due to the same repeated log lines. Note I tried a static disp_cap but nothing better.
Find the log: hastebin
Let me know if you need more info/tests
Thanks
My Minix T5 will not boot after the Matrix RC 2 update or fresh install of 20220112 Nightly.
The update/fresh install both load as normal,with text on screen confirming things,however
on the reboot part,the machine cannot pass the white Minix logo and times out to create
a loop of failed boot after failed boot.
I then went through the nightly archive and confirmed builds post and including the
rc 2 release all carry the issue.
Builds before RC 2 all update/fresh install correctly,which includes the Legacy Leah
build on the Downloads page.
I am using the nightly 20220107 without issue.
The V20 nightlies do something a little different.The T5 cannot read the sd card at all
and it goes straight to the loop I mentioned.
Minix neo t5. CoreELEC 19.4-Matrix_rc2. Single boot. There is no android.
CoreELEC 19.4-Matrix_rc2 - booted from SD card or USB flash drive - restart loop
CoreELEC 19.4-Matrix_rc1 - booted from SD card or USB flash drive - OK
CoreELEC 19.4-Matrix_rc1 - booted from SD card or USB Flash drive, auto upgrade 19.4-Matrix_rc2 (everything on the SD card) - restart loop
I am not able to upload CoreElec to TVBOX.
CoreELEC 19.4-Matrix_rc1 without internet connection to TVBOX (not auto upgrade), boot OK, kodi OK
Upgrade to RC2 version - restart loop
CoreELEC 19.4-Matrix_nightly builds - booted from SD card or USB flash drive - restart loop
Since update 19.3 => 19.4 RC2 BL301 features aren’t working correctly on my Ugoos AM6plus.
I need BL301 to have better control over my power IR command. However, when I use this, I’m unable to power up the device with the power button. Therefor, I needed to add the line gpiopower=502 to my config.ini. This worked great, but stopped working after the update, i.e., I’m unable to power up the device with the power button. Revert to 19.3 fixed it.