If it doesn’t work, open the vfd.cond file and switch the 15 and 16 values and try again.
Then you might have to play around with the vfd_char to reorder the numbers and symbols. vfd_dot_bits is responsible for the order of the symbols themselves.
does this mean that there is nothing that can be done at the moment to make the display to work? Another thing I have noticed that if I shut down or power of the box it cannot be started by remote control or by restoring power. I have to remove the power cable, then remove the SD card, reinsert power, boot in Android, reinsert SD card and reboot update through terminal. If I do not do all this the box would not boot. Just rebooting from Kodi is OK and is not a problem.
Yes, nothing to do right now.
Not sure regarding your boot issues. Try to search the forum for similar issues, I think I saw some posts about it in the past. If you can’t find a solution, open a new thread.
Hi , which vfd.conf and DTB should i use? i tried to use x96-max-1gbit-vfd.conf and put it into .config , it won’t work , should i need to cp the dtb from devices_tree and mv to flash dtb.img again ?
my box is X96 Max+ 4/64g 1Gbit Lan , just like the picture in your topic.
Hi, I cannot find a working vfd-File for my box. Here is the GPIO-Output when I boot up android. Can someone provide me with a vfd-File?
p282:/ # cat /sys/kernel/debug/gpio
GPIOs 145-154, platform/c1109880.pinmux, ao-bank:
gpio-147 (gpio_key ) in hi
gpio-148 (fd628_dev ) out hi
gpio-149 (fd628_dev ) in hi
gpio-150 (fd628_dev ) out hi
GPIOs 155-255, platform/c1109880.pinmux, banks:
gpio-172 (sda ) in hi
gpio-173 (scl ) in hi
gpio-176 (mute_gpio ) out hi
gpio-203 (amlsd ) in hi
gpio-228 (sysled ) out hi
gpio-240 (sdio_wifi ) out hi
gpio-241 (sdio_wifi ) in hi
gpio-251 (bt_rfkill ) in lo
Hi I have x96 air 2gb but i think it is another (first?¿)version.
When I flash android v2 rom I lost vdf in android.
Stock firmware was X96Air_20191017-1108 but I don´t find it to restore.
In coreelec I try all config files from repository but it doesn`t work vfd.
Is posible to work in coreelec? wrong uboot?¿
thanks and sorry for my english.