Looking for users with no working WiFi or BT

Development
121

Sorry, I thought that the BT was still not working properly, but if you think that it is better, I am going to open a new post.

122

Mecool KM9 PRO 4GB RAM
WiFi OK BT not working: http://ix.io/2gtI

123

@kodiwpigulce_pl please provide the dmesg also from this device.

124

http://ix.io/2guy
A95 Max 4GB 64
Wlan ok BT NO
mfg

125

Mecool KM9 PRO 4GB RAM
dmesg here http://ix.io/2gw5

126

@thecook you have the Mediatek 7668 chip, there is no compatible driver for the BT available.

1 Like
127

A95x F3 Air 4Gb not working bluetooth
SSH Screen

##############################################

CoreELEC

https://coreelec.org

##############################################

CoreELEC (official): nightly_20200402 (Amlogic-ng.arm)
CoreELEC:~ # udevadm info /sys/bus/sdio/devices/*
P: /devices/platform/ffe03000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:1
L: 0
E: DEVPATH=/devices/platform/ffe03000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:1
E: DRIVER=wlan
E: SDIO_CLASS=00
E: SDIO_ID=037A:7608
E: MODALIAS=sdio:c00v037Ad7608
E: SUBSYSTEM=sdio

P: /devices/platform/ffe03000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:2
L: 0
E: DEVPATH=/devices/platform/ffe03000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:2
E: SDIO_CLASS=00
E: SDIO_ID=037A:7668
E: MODALIAS=sdio:c00v037Ad7668
E: SUBSYSTEM=sdio

CoreELEC:~ #

128

@pafcio refer to my previous post, same chipset.

1 Like
129

Hi all,

I have got a Sunvell Qbox, 2gb+16gb which the wifi and bluetooth are not working. Bluetooth shows as disabled and wifi not in the menu.

I have tried running ‘udevadm info /sys/bus/sdio/devices/sdio* | paste’ via SSH but the output I get is ‘Unknown Device’. Am I doing something wrong?

130

Maybe your running the wrong device tree for your device but there should always be output.

131

Sorry I should have said it used to work but not 100% sure when it stopped as majority of the time it’s connected via ethernet.

I’ll start for scratch again and double check I’m using the right device tree and see what happens.

Edit:
So I have started from scratch again. I am using dtb gxbb_p200_2G_1Gbit. Still no wifi or bluetooth. Trying via ssh again gives:

CoreELEC:~ # udevadm info /sys/bus/sdio/devices/sdio* | paste
Unknown device “/sys/bus/sdio/devices/sdio*”: No such device

Edit again:
Left it for a while as I was busy doing something else, come back to it and switch it on and strangely it’s now working perfectly with no changes.

And another edit:

While it was working I managed to use ssh successfully, output of which is:
http://ix.io/2h0s

Annoyingly, WiFi and bt have stopped working again now.

132

@jlawes20389 it’s possible the sdio path is different on that SoC given it’s age, I will try to have a look later.

133

Thank you, don’t put yourself out though. Its hooked up to a powerline now so all is well. It was more of a curiosity thing as to why it works sometimes and not others really.

134

I have VONTAR X96Max S905X3, 4 GB, 32 GB, Wi-Fi, 1000 m, BT, CoreELEC-Amlogic-ng.arm-9.2-nightly_200408-Generic firmware installed, but there is a problem with BT, I pair the Logitech BT mouse, it only works before restarting, after restarting it needs to be re-paired, I also have a Q5 air Mouse Bluetooth remote, detected as RC_REMOTE, it pairs, but none of them works button on the remote. What am I doing wrong?

http://ix.io/2hjw

135

Your Q5 air mouse remote issue belongs in another thread.

As for the pairing issue, you need to check the mac address on the adaptor and see if it changes following a reboot. Type hcitool dev to get the MAC.

136

Devices:
hci0 22:22:D0:63:85:81
After rebooting:
Devices:
hci0 22:22:B5:AE:81:A6

138

@filkint your new mac on reboot issue will be fixed in tomorrow’s nightly, this should solve the issue of having to re-pair devices on each reboot.

139

Thank you, the latest firmware helped.

141

Any luck with adding the drivers for this one?

142

Your wifi and BT looks fine.