You will be pleased to know that there is a way to enable it as discussed here.
Whether both the a and b varieties can be enabled within 1 build I do not know but there is at least a way of doing it.
You will be pleased to know that there is a way to enable it as discussed here.
Whether both the a and b varieties can be enabled within 1 build I do not know but there is at least a way of doing it.
I’m looking forward to an official ng-build for the N2 where the rtl8761b works
Got a X96 MAX plus Q2. No working WiFi or BT with sm1_s905x3_4g_1gbit. I asked the vendor and it seems like the Q2 version uses a different wifi chip.
P: /devices/platform/ffe03000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:1
L: 0
E: DEVPATH=/devices/platform/ffe03000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:1
E: SDIO_CLASS=00
E: SDIO_ID=0271:050A
E: MODALIAS=sdio:c00v0271d050A
E: SUBSYSTEM=sdio
X96 MAX plus Q2
users:
Maybe it’s possible for one user to open the device and take pictures of the Wifi SoC/ACB?
With todays nightly (04-07) my asus wifi dongle is recognized, but i cant configure the network settings (only wired option available in CE settings).
Is it possible to use this type dongle now or make it work somehow?
Device is Odroid N2, C4.
Bus 001 Device 005: ID 0b05:17d1 ASUSTek Computer, Inc. AC51 802.11a/b/g/n/ac Wireless Adapter [Mediatek MT7610U]
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.01
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0b05 ASUSTek Computer, Inc.
idProduct 0x17d1 AC51 802.11a/b/g/n/ac Wireless Adapter [Mediatek MT7610U]
bcdDevice 1.00
iManufacturer 1 MediaTek
iProduct 2 WiFi
iSerial 3 1.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x004a
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 160mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 8
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x08 EP 8 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x07 EP 7 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x09 EP 9 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 0x000c
bNumDeviceCaps 1
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
HIRD Link Power Management (LPM) Supported
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0000
(Bus Powered)
This is a X96 MAX plus Q2, @Portisch.
There is a 1000Mb Ethernet RTL8211F, a Cdtech 4761743 radio module and two antennas.
Dear X96 MAX plus Q2
users. Please post the output of lsmod
.
Hello!
I also have such a device (X96 Max+ “Q2”)
# lsmod
Module Size Used by
meson_remote 61440 0
8021q 36864 0
mali_kbase 499712 3
wireguard 139264 0
ip6_udp_tunnel 16384 1 wireguard
udp_tunnel 16384 1 wireguard
wifi_dummy 16384 0
amvdec_vp9 126976 0
amvdec_vc1 65536 0
amvdec_real 45056 0
amvdec_ports 200704 0
v4l2_common 16384 1 amvdec_ports
videobuf2_dma_contig 20480 1 amvdec_ports
videobuf2_memops 16384 1 videobuf2_dma_contig
v4l2_mem2mem 28672 1 amvdec_ports
videobuf2_v4l2 28672 2 amvdec_ports,v4l2_mem2mem
videobuf2_core 49152 3 amvdec_ports,v4l2_mem2mem,videobuf2_v4l2
amvdec_mpeg4 65536 0
amvdec_mpeg12 106496 0
amvdec_mmpeg4 40960 0
amvdec_mmpeg12 45056 0
amvdec_mmjpeg 32768 0
amvdec_mjpeg 40960 0
amvdec_mh264 163840 0
amvdec_h265 155648 0
amvdec_h264mvc 61440 0
amvdec_h264 147456 0
amvdec_mavs 49152 0
amvdec_avs 69632 0
amvdec_avs2 212992 0
stream_input 204800 12 amvdec_h265,amvdec_mavs,amvdec_mh264,amvdec_h264mvc,amvdec_ports,amvdec_real,amvdec_vp9,amvdec_h264,amvdec_avs2,amvdec_mpeg12,amvdec_avs,amvdec_mmpeg12
decoder_common 184320 18 amvdec_h265,amvdec_mavs,amvdec_mjpeg,amvdec_mh264,amvdec_mmpeg4,amvdec_h264mvc,amvdec_mmjpeg,amvdec_ports,amvdec_real,stream_input,amvdec_vp9,amvdec_h264,amvdec_avs2,amvdec_mpeg12,amvdec_avs,amvdec_vc1,amvdec_mmpeg12,amvdec_mpeg4
firmware 28672 18 amvdec_h265,amvdec_mavs,amvdec_mjpeg,amvdec_mh264,amvdec_mmpeg4,amvdec_h264mvc,amvdec_mmjpeg,decoder_common,amvdec_real,stream_input,amvdec_vp9,amvdec_h264,amvdec_avs2,amvdec_mpeg12,amvdec_avs,amvdec_vc1,amvdec_mmpeg12,amvdec_mpeg4
media_clock 45056 12 amvdec_h265,amvdec_mavs,amvdec_mh264,decoder_common,amvdec_ports,firmware,stream_input,amvdec_vp9,amvdec_h264,amvdec_avs2,amvdec_mpeg12,amvdec_avs
amlvideodri 24576 0
videobuf_res 16384 1 amlvideodri
videobuf_core 32768 2 amlvideodri,videobuf_res
videodev 286720 6 amlvideodri,v4l2_common,amvdec_ports,videobuf2_core,v4l2_mem2mem,videobuf2_v4l2
media 40960 1 videodev
fbcon 61440 0
bitblit 16384 1 fbcon
softcursor 16384 1 bitblit
font 20480 1 fbcon
Mecool M8S Pro L
S912 3G
gxm_q201_3g
9.2.7
dmesg | paste
http://ix.io/2VA4
lsusb -v | paste
http://ix.io/2LV2
Bluetooth cannot find the device
本来9.2.7是可以用蓝牙的,还连接了蓝牙音箱。但是CoreELEC不支持红外遥控,于是我按网上找到资料在ssh中执行了以下命令:
systemctl stop kodi
systemctl stop eventlircd
ir-keytable -a /storage/.config/rc_maps.cfg -s rc0
systemctl start eventlircd
systemctl start kodi
然后蓝牙就不能找到设备了,服务里面能够启用蓝牙。烦请解决,谢谢
WiFi and bluetooth don’t work for me either. X96 MAX plus 4+64 (Q2?)
I currently working on a solution for this WiFi SoC, will need some more days…
I have here a test image for this WiFi device. It’s a image including QCA6174 driver. It’s untested, but maybe can work already.
Please keep in mind it’s a CoreELEC-19-Matrix update!!
So when using 9.2 please update first to a fresh clean 19.1-Matrix_rc2!
First test:
CoreELEC-Amlogic-ng.arm-19.1-Matrix_devel_20210411081809.tar
If the new image is booted please post debug logs by:
dmesg | paste
and
journalctl -u qca-firmware-aml | paste
My A95X with the MediaTek MTK7668 Chipset, does have WLAN but No Bluetooth .
This was not the question! No log provided, no support!
Hi, I am a newbie here. So I hope my logs are correct. I have X96 max plus with todays update, but wifi and bluetooth dont work anyway.
Thank you, i will create a new image later…
EDIT:
@Dzimmi please try again with this image:
CoreELEC-Amlogic-ng.arm-19.1-Matrix_devel_20210411182625.tar
Please post again all logs and also the output of
udevadm info /sys/bus/sdio/devices/* | paste
Bluetooth seems to work now, but wifi is still dead.
http://ix.io/2VLg
http://ix.io/2VLh
udevadm info /sys/bus/sdio/devices/* | paste
P: /devices/platform/ffe03000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:1
L: 0
E: DEVPATH=/devices/platform/ffe03000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:1
E: SDIO_CLASS=00
E: SDIO_ID=0271:050A
E: MODALIAS=sdio:c00v0271d050A
E: SUBSYSTEM=sdio
E: USEC_INITIALIZED=6684760
E: SYSTEMD_WANTS=qca-firmware-aml.service
E: TAGS=:systemd:
E: CURRENT_TAGS=:systemd:
As I do not have this hardware we need to do it step by step…
First fix all BT issues. Please try this image and make again a log please!
CoreELEC-Amlogic-ng.arm-19.1-Matrix_devel_20210411192611.tar
wifi doese not work yet because of:
ar6k_wlan sdio:0001:1: Direct firmware load for qca6174/wlan/qcom_cfg.ini failed with error -2
I still getting info: Sorry you cannot post a link to that host
P: /devices/platform/ffe03000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:1
L: 0
E: DEVPATH=/devices/platform/ffe03000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:1
E: SDIO_CLASS=00
E: SDIO_ID=0271:050A
E: MODALIAS=sdio:c00v0271d050A
E: SUBSYSTEM=sdio
E: USEC_INITIALIZED=6958786
E: SYSTEMD_WANTS=qca-firmware-aml.service
E: TAGS=:systemd:
E: CURRENT_TAGS=:systemd:
About | FAQ | Terms of Service | Privacy Policy | Legal Notice