Hi Portisch, CoreELEC-Amlogic-ng.arm-19.1-Matrix_devel_20210412215312.tar works great after 2 days and newest CoreELEC-Amlogic-ng.arm-19.1-Matrix_devel_20210413152421.tar works too (5x restart).
Progress! CE does now show the WLAN configurations options, but it appears not to be scanning for networks: there are no WIFI network in the Connection menu item. Furthermore:
lsmod |grep -i 8723
8723bs 1585152 0
Dmesg:
http://ix.io/2W1P
I tried rebooting, disabling and enabling the wlan menu option, but no luck.
Forgot to add: BT is not working either. But for me that’s not a problem.
I think your device reached EOL:
The chip SoC got removed Dec 31, 2014.
There is no driver out there anymore supporting RTL8723AS.
[post removed…I got it]
What you expect without any log?
And how can i get log without network? 
I donť understand, sorry
You use an ethernet cable and connect it to your router. You don’t need a TV/screen to boot CE and SSH to it.
X96 MAX Plus Q2
CoreELEC-Amlogic-ng.arm-19.1-Matrix_devel_20210413152421.tar is no longer available on the MEGA repository.
Wait for CoreELEC 19.1-Matrix_rc3 to fix wifi and bluetooth bug? When to expect?
@Bart @Lucky3058 @truztruz
Please try tomorrow CE-19 nightly. The WiFi 3030:3030 X96 Mini should now work.
It uses the SSV6030P WiFi SoC and the driver was needed to be adjusted.
hello, i´m allready try CoreELEC-Amlogic-ng.arm-19.1-Matrix_nightly_20210419 in new x96 mini
Wifi 3030:3030 -----> OK
Reboot ---------------> OK
@Portisch There´s any chance to change the script ceemmc, to install the firmware in NAND in this new x96 mini, because somethimes when in sdcard, we´ve got small freezes. In the old x96 mini i can install in nand, and run like a charm…
When i try install in nand in this new x96 mini, it takes a eternety to install, and then when restart is very slow to start ( 3 or 4 minutes). And then is very slowly to work to.
Can you help with this…?
Thank You Everything.
2 Likes
Ceemmc is working normally and the device is booting fast.
Sometimes it’s different from device to device due to hardware problems. I once had a X96 air to test and the booting processe from cemmc took over one minute and we have dozens of X96 air running CE and no complaints.
Try it on another X96 mini if you haven’t tried it already in new nightly. If it’s still slow try a fresh install and not an upgrade.
@Vasco , thank you for your quick reply,
Yes i´ve got one X96 air with this problem too, but i ask to supplier change it, and the problem is solved.
With this new x96 mini, the problem is very different, yes i try a fresh install with the new nightly, in other new x96 mini, but seems the problem remains, i believe is about hardware problems.
After this, i flash the box with original firmware again, boot from sdcard, and works normally.
what could it be …
No support for non CoreELEC supporter!
Using ceemmc on this device is on your own risk!
Just tried the nightly build “CoreELEC-Amlogic-ng.arm-19.1-Matrix_nightly_20210419-Generic.img.gz” on my X96 Max+ (S905x3, 4g/32g, gbe). It seems WiFi & BT are working now (It was not working in CoreELEC 19).
Here is the log: http://ix.io/2WC6
Thanx.
As @Portisch said this is not one of our supported ceemmc devices. I can only say that the one I have here works perfectly with ceemmc.