Mecool m8s plus dvb

This has been covered already, multiple times. We don’t have a source for that Wifi chip, no source code = no driver.
That precompiled module doesn’t work in CE, and therefore it was removed.

Thank You for informations. Ethernet and WiFi dongle works fine.
And AVL6762 for example with TVHeadend?

I can’t answer that. Try the search function in the forum.
But if it’s not working, then there’s probably no driver for the chip in CE either.

AVL6762 is unsupported.

HI dear, i cannot install this firmware on my m8s plus dvb. i have burn the img file with win32 disk image and put usb in the usb and press reset button and pluged the power.
but nothing…
help me with a guide… thanks

@antrace82 did you copy and rename the DTB?

You have to use gxl_p231_1g_m8s_dvb.dtb. Unsupported wifi, bt and install to internal nand flash. DVB-T2/C supported only in dvb-latest-drivers addon.

I have problem with start Android and CE, LE on this box. Only showing boot logo AndroidTV.
Is the device bricked? How fix it? Reset buton not work and i don’t know how reflash. Or where can I find correct IMG file for AMLOGIC usb tool.

I moved your reply here as you posted on wrong topic.
Now i see you have posted here before.
So what has gone wrong ??
If you’ve installed "CE to internal"
It’s Game Over as far as support goes on this forum.

Android Firmware / Amlogic burning tools will not be supported here.
Supplier of your box can help you.
Or over to Freaktab Forum.

No i only boot from USB LibreElec, CoreElec builds.

Do DVB S2 (satellite) drivers work correctly?
After installation, TVHeadEnd can not see DVB adapters.

CE supports only Mecool M8S Plus DVB-T2/C. No support for DVB-S2 version.
Also you have to use gxl_p231_1g_m8s_dvb.dtb for this box.
This box is not recommended by CE team, there is missing linux driver for WiFi chipset.
If you look for full support for both boxes you can try CE clone “AlexELEC”.

Could be somebody make new DTB for Mecool M8S Plus DVB-T2/C?
There is working source for this one.

gxl_p231_1g_m8s_plus_dvbt.dts (1.7 KB)

Dev is away.

I did not find how to compile the tds to tdb.
Is is here somebody who know how to do it?

I tried use dtc for compile but wit this error:
FATAL ERROR: Unable to parse input tree

You can build the linux package.

Which package? I using Ubuntu desktop and I have install dtc compiler package from repository for dts and dtb, but I am not able to compile it.
Is there somebody who can compile this dts file to dtb: gxl_p231_1g_m8s_dvb-t2.dts attachment (1.6 KB)
It is for Mecool M8S Plus DVB-T2/C. It is working dts from AlexELEC source.

Because CoreELEC dtb for M8S Plus tuner does’nt work.

You can’t easily just build a DTS as it has many dependencies. You can do it when you build the linux package from CE source.

This .dts has dependecie on gxl_p231_1g.dts.
In CoreELEC source is wrong I2C address, for this device is correct addres 0x60 not 0x69 or 0x14.
Therefore the dtb does not working.
If there somebody who can compile it, please let’s do it…

My device is Mecool M8S Plus DVB T2. Please advise which variant should I use. Generic Devices S905? or Mecool KI Plus (S905D)?
Thanks.