Nightly builds (NEW)

I have a problem whith my s905x3 2gb 100mb Box with both 20 änd 19.4 nightly update:

When I upgrade (rar) with the new Nightlys my LAN dont work
But if I take the Image from the same Nightly it works

If i make a rar update again the LAN dont work
If i change the dtb.img file from the Device Tree then it works

I make a file compare with the dtb.img file from the upgrade and the file in the Device tree there are differences

I test the same on a Odroid N2 and a s905x2 Box there is no Problem

Has enyone the same problems ?

Can you clarify this more in detail? Which files are different?

Sorry for my bad english
After the update from rar file LAN dont work
If I take the SD card from the box in the cardreader on the PC and delete the dtb.img file and copy
the file from the device tree (sm1_s905x3_2g.dtb) and rename it to dtb.img then it work
But if i make a update again its the same, LAN dont work

And so i make a file compare from the dtb.img file from the upgrade that dont work and the sm1_s905x3_2g.dtb file from the device tree there are differences

I dont know if this is normal

I have the problems since the las thet 2 or 3 updates , i think

Check in CoreELEC settings under hardware/device tree. There has been some changes to support one ethernet adapter.

Can you upload your dtb.img which doesn’t work after update with .tar file?

This is the the dtb.img where LAN dont work
dtb.img (69.2 KB)

Look here X96 max+ revision AI - ICPlus_IP1001 (lan is not working) - #74 by Portisch

And try both settings.
Or just remove file /flash/dtb.xml. Then it should work fine even after update.

I remove the dtb.xml in /flash and now it works !
Thanks for the support

1 Like

Seriously, there is such a problem when dtb.xml is automatically created and then updated it breaks. I didn’t have a problem with the LAN but after the update the IP1001 option disappeared. Will there be a repair?

Bugs happen and when they are discovered they are also fixed - try again with tomorrow nightly.

Hi guys, congratulating for future Christmas & new year!
Now just install last nightly Nexus from 23122021 on my x96max s905x2, and booting only in safe mode, standart mode is fail

downgraded to 18122021 normal boot

p.s. s905x3 booting normal

[ 18.343967@3] audit: type=1701 audit(1640438945.883:2): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=4762 comm="kodi.bin" exe="/usr/lib/kodi/kodi.bin" sig=6
It should be kodi crash log there too, please upload it too. It’s some kodi or addon issue.

1 Like

ERROR <general>: Unable to load /storage/.kodi/addons/vfs.libarchive/, reason: cannot open shared object file: No such file or directory

vfs.libarchive doesn’t work temporary. we will check later


The same last Nexus nightly 23122021 on ki pro s905d, not woring dtb module and dtb service

Nightly builds Nexus is not update from 23.12.2021, Matrix from 22.12.2021

It was Christmas, man! :santa:


I’m forgot :slight_smile: , I’m from Russia, we are congratulating Christmas 07.01 :slight_smile:

Cчастливого Рождества! Yes, you still have time to do some shopping! :santa:


I have installed nightly 20211222 19.4 matrix on my X96MAX 4/64 905X2 using pendrive in usb 3.0 port. I have used the g12a_s905x2_4g_1gbit.dtb. Perfect 5G Wifi. Ethernet assigns IP and connects but does not work. It DOES work if I limit it to 100mbit per putty but it doesn’t work gigabit. I see that this old problem persists over time. The ethernet chip is the RTL8211F. Android 300MB symmetric works perfectly. I do not understand where the problem can be and I have read a lot about it when there was support for leia. Hope someday this x96max works gigabit ethernet properly. I have thought about buying a ugreen usb 3.0 hub but I don’t know if it will work or will it be wasted money.