Nightly builds (NEW)

I thought you were encrypting before. I thought you were encrypting before.
after reboot
http://ix.io/3MA9

It’s only dmesg log and I don’t see for any stream playback
See the link in my previous message how to collect debug log.
In case it’s encrypted you will see black screen in most cases.

1 Like

Log files
http://ix.io/3MAt

Yes ,I met the sync issues too,It seems to happen on N2 only, on vim3 ,no issues, don’t know why.

I don’t see something that tries to recognize this channel format
but there are some errors that I don’t know what they mean.
2022-01-17 20:20:42.359 T:3964 DEBUG <general>: ffmpeg[(nil)X]: [image2] Custom AVIOContext makes no sense and will be ignored with AVFMT_NOFILE format.
Jan 17 20:20:43.932484 CoreELEC tvheadend[3300]: diseqc: failed to set high voltage 0 (e=Unknown error 524)
You could also try to enable ffmpeg option additionally in debug components. Use latest nightly. May be some stream details will be visible if it receive something.

1 Like

Please reboot box and enable debug with audio/video sync enabled
Just after issue will be repeated stop debug and upload debug log
Also please clarify what are you using as audio output?

@crazyturk please try today’s nightly again. Your log still shows errors what should have been fixed with nightly 20220118

1 Like

The daily receiving link over the device gives an error.
file log 18-01-2022
https://paste.c-net.org/DoughAngels

Do you mean error for channel we talked about?

1 Like

You have a G12B rev a SoC, please try this in SSH:

mount -o rw,remount /flash
fdtput -t x /flash/dtb.img /reserved-memory/linux,di_cma size 0 5800000
sync
reboot

Also try to limit HDMI output to 4:2:2 in Kodi settings, thx.

@startv @Shoog Please try this SSH cmds also on your hardware. I have seen this also on my device, video starts stuttering and play normally after 1-2 seconds, audio start normal. So they are finally out of sync. Pressing pause bring them back in sync as audio stops and video continue running until they are in sync again.

1 Like

Will try that and report back.

Edit: Initial impressions are good.

Shoog

1 Like

@Shoog @startv please pick your dtb from here and update dtb.img by your needed one:

Please report if the video/audio sync error is fixed. Thx!

There seems to be also a bug when you pause/play video few time sound is going out of sync by few ms - when you stop playing and play this file gain all is the same way it should be.
I use nightly build on X96 Max plus 4/64 installed on emmc.
Movie played from USB 3.0 HDD.

@loki7777

How to update dtb.img that is on emmc(flash folder i assume?) Can’t copy to this folder over ftp.

I tried with nightly(newly downloaded from www)+new dtb.img from mega(didn’t try the one with img) and it is ok now from sd card - will try to update it on emmc now.

From emmc is ok as well.

N2 replaced the old dtb.img with the new one , the video/audio sync error is fixed, thank you .

Emmc or sd boot? It looks like it is back after a while on my box.

n2 boot from sd card

your box is sm1(s905x3), it should already have this fix…

I think a clean install with no addons will solve the issue…