The daily receiving link over the device gives an error.
file log 18-01-2022
https://paste.c-net.org/DoughAngels
Do you mean error for channel we talked about?
1 Like
You have a G12B rev a SoC, please try this in SSH:
mount -o rw,remount /flash
fdtput -t x /flash/dtb.img /reserved-memory/linux,di_cma size 0 5800000
sync
reboot
Also try to limit HDMI output to 4:2:2 in Kodi settings, thx.
@startv @Shoog Please try this SSH cmds also on your hardware. I have seen this also on my device, video starts stuttering and play normally after 1-2 seconds, audio start normal. So they are finally out of sync. Pressing pause bring them back in sync as audio stops and video continue running until they are in sync again.
1 Like
Will try that and report back.
Edit: Initial impressions are good.
Shoog
1 Like
@Shoog @startv please pick your dtb from here and update dtb.img by your needed one:
Please report if the video/audio sync error is fixed. Thx!
There seems to be also a bug when you pause/play video few time sound is going out of sync by few ms - when you stop playing and play this file gain all is the same way it should be.
I use nightly build on X96 Max plus 4/64 installed on emmc.
Movie played from USB 3.0 HDD.
How to update dtb.img that is on emmc(flash folder i assume?) Can’t copy to this folder over ftp.
I tried with nightly(newly downloaded from www)+new dtb.img from mega(didn’t try the one with img) and it is ok now from sd card - will try to update it on emmc now.
From emmc is ok as well.
N2 replaced the old dtb.img with the new one , the video/audio sync error is fixed, thank you .
Emmc or sd boot? It looks like it is back after a while on my box.
n2 boot from sd card
your box is sm1(s905x3), it should already have this fix…
I think a clean install with no addons will solve the issue…
Will check it on friday - you might be right as on sd card it was a clean install while on emmc i did update - unless it removes everything as well first?
Hi guys, sorry and what now Nexus not will new builds?
CoreELEC-Amlogic-ng.arm-20.0-Nexus_nightly_20220113.tar this is last
We’re working on it!
3 Likes
Build 20220120 is available.
1 Like
tonight will test
ps.
KI PRO
CoreELEC (official): 20.0-Nexus_nightly_20220120 (Amlogic-ng.arm)CoreELEC:~ # dmesg|paste
http://ix.io/3MVA
X96Max
CoreELEC (official): 20.0-Nexus_nightly_20220120 (Amlogic-ng.arm)CoreELEC:~ # dmesg|paste http://ix.io/3MVG
X96Max+2_AI
CoreELEC (official): 20.0-Nexus_nightly_20220120 (Amlogic-ng.arm)CoreELEC:~ # dmesg|paste
http://ix.io/3MVL
All is working, great work, you’re best guys 
Has anyone noticed a problem with the PlayerProcess VideoDAR with the nightly builds after the kernel bump?
H.265 content using the AMLogic decoder always indicates a video aspect ratio of 0.25
Aspect ratio is correct for H.264 content or if software decoder is used
The initial decoder info is correct, but after that the aspect ratio value is always 0.25
CAMLCodec::OpenDecoder hints.width(1920), hints.height(800), hints.codec(173), hints.codec_tag(0)
CAMLCodec::OpenDecoder hints.fpsrate(24000), hints.fpsscale(1001), video_rate(4004)
CAMLCodec::OpenDecoder hints.aspect(2.400000), video_ratio.num(1), video_ratio.den(1)
CAMLCodec::OpenDecoder hints.orientation(0), hints.forced_aspect(1), hints.extrasize(86)
AAC decoding doesn’t seem to be working in the nightlies.
Shoog