Please add the dtb for using s905L2B&3B soc's tvbox,such as mgv2000、zte b860av2.1a\m\t、e900v21e etc,thank you guys verymuch!

eielise · 25 October 2021 17:37

I find the way that update uboot only!

gxl_p211_v1#help
?       - alias for 'help'
aml_sysrecovery- Burning with amlogic format package from partition sysrecovery
amlmmc  - AMLMMC sub system
amlnf   - aml nand sub-system
amlnf_test- AMLPHYNAND sub-system
autoscr - run script from memory
base    - print or set address offset
bmp     - manipulate BMP image data
booti   - boot arm64 Linux Image image from memory
bootm   - boot application image from memory
bootp   - boot image via network using BOOTP/TFTP protocol
cbusreg - cbus register read/write
clkmsr  - measure PLL clock
cmp     - memory compare
cp      - memory copy
crc32   - checksum calculation
cvbs    - CVBS sub-system
d2pll   - DDR set PLL function
dcache  - enable or disable data cache
ddr_dqs_window_step- DDR tune dqs function
ddr_spec_test- DDR test function
ddr_sram_tune- DDR sram tune dqs
ddr_test_ac_bit_setup_hold_window- DDR test ac bit margin function
ddr_test_cmd- ddr_test_cmd cmd arg1 arg2 arg3...
ddr_test_copy- ddr_test_copy function
ddr_test_data_bit_setup_hold_window- DDR test data bit margin function
ddr_test_tune_dqs_env- do_ddr_fine_tune_lcdlr_env arg1 arg2 arg3...
ddr_tune_aclcdlr_step- ddr_tune_aclcdlr_step function
ddr_tune_ddr_ac_acbdlr_ck- DDR tune dqs function
ddr_tune_ddr_ac_aclcdlr- DDR tune dqs function
ddr_tune_ddr_ac_bdlr- DDR tune ac bdl function
ddr_tune_ddr_vref- DDR tune vref function ddr_tune_ddr_vref  a 0 0x8000000  1 48                      1
ddr_tune_dqs- DDR tune dqs function
ddr_tune_dqs_step- ddr_tune_dqs_step function
ddrft   - Enable/Disable ddr full test at runtime

Only support gxl/gxm/txl
ddrtest - DDR test function
ddrtest_gate- DDR test function should dcache off ddrtest_gate a 0 0x80000 1 0 3
ddrtest_gx_crosstalk- DDR test function
ddrtest_gxtvbb_crosstalk- DDR test function
defenv_reserv- reserve some specified envs after defaulting env
dhcp    - boot image via network using DHCP/TFTP protocol
echo    - echo args to console
efuse   - efuse read/write data commands
efuse_user- efuse user space read write ops
emmc    - EMMC sub system
env     - environment handling commands
exit    - exit script
false   - do nothing, unsuccessfully
fatinfo - print information about filesystem
fatload - load binary file from a dos filesystem
fatls   - list files in a directory (default /)
fatsize - determine a file's size
fdt     - flattened device tree utility commands
get_rebootmode- get reboot mode
go      - start application at address 'addr'
gpio    - query and control gpio pins
hdmitx  - HDMITX sub-system
help    - print command description/usage
i2c     - I2C sub-system
icache  - enable or disable instruction cache
imgread - Read the image from internal flash with actual size
irkey   - irkey key_value1 key_value2 key_value3 time_value
itest   - return true/false on integer compare
jtagoff - disable jtag
jtagon  - enable jtag
keyman  - Unify key ops interfaces based dts cfg
keyunify- key unify sub-system
loop    - infinite loop on address range
macreg  - ethernet mac register read/write/dump
md      - memory display
mm      - memory modify (auto-incrementing address)
mmc     - MMC sub system
mmcinfo - display MMC info
mw      - memory write (fill)
mwm     - mw mask function
nm      - memory modify (constant address)
open_scp_log- print SCP messgage
osd     - osd sub-system
phyreg  - ethernet phy register read/write/dump
ping    - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
rarpboot- boot image via network using RARP/TFTP protocol
read_temp- cpu temp-system
reboot  - set reboot mode and reboot system
reset   - Perform RESET of the CPU
rsvmem  - reserve memory
run     - run commands in an environment variable
saradc  - saradc sub-system
saradc_12bit- saradc sub-system
saveenv - save environment variables to persistent storage
sdc_burn- Burning with amlogic format package in sdmmc
sdc_update- Burning a partition with image file in sdmmc card
set_trim_base- cpu temp-system
set_usb_boot- set usb boot mode
setenv  - set environment variables
showvar - print local hushshell variables
sleep   - delay execution for some time
store   - STORE sub-system
systemoff- system off
temp_triming- cpu temp-system
test    - minimal test like /bin/sh
tftpboot- boot image via network using TFTP protocol
true    - do nothing, successfully
unpackimg- un pack logo image into pictures
update  - Enter v2 usbburning mode
usb     - USB sub-system
usb_burn- Burning with amlogic format package in usb
usb_update- Burning a partition with image file in usb host
usbboot - boot from USB device
version - print monitor, compiler and linker version
vout    - VOUT sub-system
vpu     - vpu sub-system
wipeisb - wipeisb
write_trim- cpu temp-system
write_version- cpu temp-system

gxl_p211_v1#usb_update bootloader u-boot.bin
usb_start_count 1
[fat]Filesize is 0xd4000B[0M]
[MSG]Down(store) part(bootloader) sz(0xd4000) fmt(normal)
[MSG]totalSlotNum = 0, nextWriteBackSlot 14
[fat]Filesize is 0xd4000B[0M]
[MSG]Burn Start...
mmc switch to boot0 success
mmc switch to boot1 success
mmc switch to user success
[MSG]align bootloader sz from 0xd4000 to 0x100000
[MSG]Burn complete
BURN u-boot.bin to part bootloader OK!
=====>Burn part bootloader in fmt normal OK<======

gxl_p211_v1#

eielise · 25 October 2021 17:39

gxl_p211_v1#<INTERRUPT>
gxl_p211_v1#reboot
reboot use default mode: normal
INFO:    PSCI Affinity Map:
INFO:      AffInst: Level 0, MPID 0x0, State ON
INFO:      AffInst: Level 0, MPID 0x1, State OFF
INFO:      AffInst: Level 0, MPID 0x2, State OFF
INFO:      AffInst: Level 0, MPID 0x3, State OFF
bl31 reb▒GXLX:BL1:9ac50e:4a8da0;FEAT:ADFD318C:0;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
TE: 95600

BL2 Built : 15:21:58, Mar 26 2020. gxl g486bc38 - gongwei.chen@droid11-sz

set vcck to 1120 mv
set vddee to 1000 mv
Board ID = 3
CPU clk: 1200MHz
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0+1 @ 792MHz - FAIL
DDR3 chl: Rank0 @ 792MHz
bist_test rank: 0 20 00 41 2d 11 49 1e 00 3d 30 15 4c 20 00 40 2e 13 4a 1e 00 3c 2f 14 4b 725   - PASS

Rank0: 1024MB(auto)-2T-11
AddrBus test pass!
Set ddr ssc: ppm1000-
eMMC boot @ 0
sw8 s
emmc switch 3 ok
Authentication key not yet programmed
get rpmb counter error 0x00000007
emmc switch 0 ok
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000, part: 0
New fip structure!
Load bl30 from eMMC, src: 0x00010200, des: 0x013c0000, size: 0x0000d600, part: 0
Load bl31 from eMMC, src: 0x00020200, des: 0x05100000, size: 0x0002c400, part: 0
0002c400Load bl33 from eMMC, src: 0x00050200, des: 0x01000000, size: 0x00080a00, part: 0
NOTICE:  BL3-1: v1.0(release):f5121da90
NOTICE:  BL3-1: Built : 20:18:22, Nov 22 2019
NOTICE:  BL3-1: GXL normal boot!
NOTICE:  BL3-1: BL33 decompress fail
NOTICE:  BL3-1: ERROR! GXL FIP HDR process fail 4!
mpu_config_enable:system pre init ok
dmc sec lock
[Image: gxl_v1.1.3394-7d43064d5 2020-05-07 15:37:15 gongwei.chen@droid11-sz]
OPS=0xc1
26 0a c1 00 f7 d1 f1 21 3d 41 65 dd 84 f5 c4 f7
[0.557530 Inits done]
secure task start!
high task start!
low task start!
ERROR:   Error initializing runtime service opteed_fast

eielise · 25 October 2021 18:28

I restore my box again with original IMG，then i copied the u-boot.bin to USB drive，then i stoped the autoboot and reboot it from USB drive with uboot cmd.

gxl_p211_v1#
gxl_p211_v1#usbboot
** No device specified **
gxl_p211_v1#usb
usb - USB sub-system

Usage:
usb start - start (scan) USB controller
usb reset - reset (rescan) USB controller
usb stop [f] - stop USB [f]=force stop
usb tree - show USB device tree
usb info [dev] - show available USB devices
usb test [dev] [port] [mode] - set USB 2.0 test mode
    (specify port 0 to indicate the device's upstream port)
    Available modes: J, K, S[E0_NAK], P[acket], F[orce_Enable]
usb storage - show details of USB storage devices
usb dev [dev] - show or set current USB storage device
usb part [dev] - print partition table of one or all USB storage    devices
usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'
    to memory address `addr'
usb write addr blk# cnt - write `cnt' blocks starting at block `blk#'
    from memory address `addr'
gxl_p211_v1#usb start
(Re)start USB...
USB0:   USB3.0 XHCI init start
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices... init_part() 278: PART_TYPE_DOS
1 Storage Device(s) found
gxl_p211_v1#usbboot
** No device specified **
gxl_p211_v1#No device specified <INTERRUPT>
gxl_p211_v1#usbboot  /help
** No device specified **
gxl_p211_v1#usb tree
USB device tree:
  1  Hub (5 Gb/s, 0mA)
  |  u-boot XHCI Host Controller
  |
  +-2  Mass Storage (480 Mb/s, 300mA)
       Kingston DataTraveler 3.0 60A44C413984F2A10970AB41

gxl_p211_v1#usb dev [dev1]

USB device 0:
    Device 0: Vendor: Kingston Rev:  Prod: DataTraveler 3.0
            Type: Removable Hard Disk
            Capacity: 14755.2 MB = 14.4 GB (30218842 x 512)
... is now current device
gxl_p211_v1#usbboot Device 0

Loading from usb device 0, partition 1: Name: usbda1  Type: U-Boot
"Synchronous Abort" handler, esr 0x96000210
ELR:     37ebe380
LR:      37ec2730
x0 : 00000000000000de x1 : 0000000037f80cc0
x2 : 0000000000000000 x3 : 0000000000000200
x4 : 0000000033e7e0c0 x5 : 0000000037f14db0
x6 : 0000000037f14db0 x7 : 0000000000000200
x8 : 000000000000000d x9 : 0000000000000000
x10: 00000000003e0000 x11: 0000000000010000
x12: 0000000000000000 x13: 0000000000000000
x14: 0000000000000000 x15: 0000000000000000
x16: 0000000000000000 x17: 0000000000000000
x18: 0000000033e75e28 x19: 00000000000000de
x20: 0000000000000003 x21: 0000000000000000
x22: 0000000000000001 x23: 0000000033e80030
x24: 0000000000000001 x25: 0000000000000000
x26: 0000000037f612b0 x27: 0000000033e80060
x28: 0000000000000000 x29: 0000000033e75aa0

Resetting CPU ...

resetting ...
GXLX:BL1:9ac50e:4a8da0;FEAT:ADFD318C:0;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
TE: 175460

BL2 Built : 20:33:18, Oct 17 2017.
gxl ge978680 - liqiang.hou@droid07-sz

Board ID = 3, adc=227
set vcck to 1070 mv
set vddee to 1070 mv
CPU clk: 1200MHz
2layers board, use ddr_set[0]
DQS-corr enabled
DDR scramble enabled
Pull down ddr cke
STICKY_REG0: 0x00000000
STICKY_REG1: 0x00000000
STICKY_REG9: 0x00000000
DDR3 chl: Rank0 @ 696MHz
Rank0: 1024MB(auto)-2T-11
DataBus test pass!
AddrBus test pass!
emmc switch highspeed 52M
-s
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
New fip structure!
Load bl30 from eMMC, src: 0x00010200, des: 0x01100000, size: 0x00007600
Load bl301 from eMMC, src: 0x00018200, des: 0x01200000, size: 0x00002200
Load bl31 from eMMC, src: 0x0001c200, des: 0x10100000, size: 0x00019600
Load bl33 from eMMC, src: 0x00038200, des: 0x01000000, size: 0x0007d800
NOTICE:  BL3-1: v1.0(debug):3048f05
NOTICE:  BL3-1: Built : 22:38:14, Aug 20 2017
NOTICE:  BL31: GXL normal boot!
NOTICE:  BL31: BL33 decompress pass
[Image: gxl_v1.1.3098-cf1f353 2017-09-11 19:43:10 xiaobo.gu@droid12]
efuse init ops = c1
efuse init hdcp = c, cf9=7
bl30: check_permit, count is 1
bl30: check_permit: ok!
chipid: 0 0 3 c c 0 92 b3 98 a0 0 c1 not ES chip
[0.429212 Inits done]
INFOs:    BL3-1: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL3-1: Preparing for EL3 exit to normal world
INFO:    BL3-1: Next image address = 0x1000000
INFO:    BL3-1: Next image spsr = 0x3c9
ecure task start!
kigh tas
s
ttUa-rBto!o
  2lo0w1 5t.a0s1k  (sMtaarr t0!5
 2018 - 20:55:20)

DRAM:  1 GiB
Relocation Offset is: 36e86000
gpio: pin GPIODV_24 (gpio 43) value is 1
register usb cfg[0][1] = 0000000037f582b0
[CANVAS]canvas init
vpu: error: vpu: check dts: FDT_ERR_BADMAGIC, load default parameters
vpu: clk_level = 7
vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300)
vpp: vpp_init
boot_device_flag : 1
Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
init bus_cycle=6, bus_timing=7, system=5.0ns
reset failed
get_chip_type and ret:fffffffe
get_chip_type and ret:fffffffe
chip detect failed and ret:fffffffe
nandphy_init failed and ret=0xfffffff1
MMC:   aml_priv->desc_buf = 0x0000000033e76ac0
aml_priv->desc_buf = 0x0000000033e78de0
SDIO Port B: 0, SDIO Port C: 1
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
[mmc_init] mmc init success
dtb magic 08088b1f
      Amlogic multi-dtb tool
      GZIP format, decompress...
      Multi dtb detected
      2layers board, board id use 7
      Multi dtb tool version: v2 .
      Support 7 dtbs.
        aml_dt soc: gxlx platform: p261 variant: 1g
        dtb 0 soc: gxbb   plat: p201   vari: 1g
        dtb 1 soc: gxbb   plat: p201   vari: 2g
        dtb 2 soc: gxl   plat: p211   vari: 1g
        dtb 3 soc: gxl   plat: p211   vari: 2g
        dtb 4 soc: gxl   plat: p215   vari: 1g
        dtb 5 soc: gxl   plat: p215   vari: 2g
        dtb 6 soc: gxlx   plat: p261   vari: 1g
      Find match dtb: 6
start dts,buffer=0000000033e7b610,dt_addr=0000000033e7b610
      Amlogic multi-dtb tool
      Single dtb detected
parts: 13
00:      logo   0000000002000000 1
01:  recovery   0000000002000000 1
02:       rsv   0000000000800000 1
03:       tee   0000000000800000 1
04:     crypt   0000000002000000 1
05:      misc   0000000002000000 1
06: instaboot   0000000020000000 1
07:      boot   0000000002000000 1
08:    system   0000000040000000 1
09:     cache   0000000020000000 2
10:    params   0000000004000000 2
11: bootfiles   0000000020000000 2
12:      data   ffffffffffffffff 4
eMMC/TSD partition table have been checked OK!
check pattern success
mmc env offset: 0x27400000
In:    serial
Out:   serial
Err:   serial
board id is : 3
hpd_state=0
cvbs performance type = 7, table = 1
[store]To run cmd[emmc dtb_read 0x1000000 0x40000]
_verify_dtb_checksum()-917: calc da98d767, store da98d767
_verify_dtb_checksum()-917: calc da98d767, store da98d767
dtb_read()-1039: total valid 2
dtb_read()-1106: do nothing
      Amlogic multi-dtb tool
      GZIP format, decompress...
      Multi dtb detected
      2layers board, board id use 7
      Multi dtb tool version: v2 .
      Support 7 dtbs.
        aml_dt soc: gxlx platform: p261 variant: 1g
        dtb 0 soc: gxbb   plat: p201   vari: 1g
        dtb 1 soc: gxbb   plat: p201   vari: 2g
        dtb 2 soc: gxl   plat: p211   vari: 1g
        dtb 3 soc: gxl   plat: p211   vari: 2g
        dtb 4 soc: gxl   plat: p215   vari: 1g
        dtb 5 soc: gxl   plat: p215   vari: 2g
        dtb 6 soc: gxlx   plat: p261   vari: 1g
      Find match dtb: 6
Net:   dwmac.c9410000
wipe_data=successful
wipe_cache=successful
bmp pixel: 16
[CANVAS]addr=0x3d800000 width=2560, height=1440
upgrade_step=2
amlkey_init() enter!
[EFUSE_MSG]keynum is 4
[BL31]: tee size: 0
[KM]Error:f[key_manage_query_size]L507:key[usid] not programed yet
[KM]Error:f[key_manage_query_size]L507:key[deviceid] not programed yet
rebootmode=normal
key1 = 7d82dd22
key2 = 7e81dd22
key3 = 7788dd22
time_out = 7a120
ir init
irkey - irkey key_value1 key_value2 key_value3 time_value

Usage:
irkey
key1 = fb04ff00
key2 = ef10ff00
key3 = b14eff00
time_out = 7a120
ir init
irkey - irkey key_value1 key_value2 key_value3 time_value

Usage:
irkey
Hit any key to stop autoboot:  0
ee_gate_off ...
## Booting Android Image at 0x01080000 ...
reloc_addr =33efb830
copy done
      Amlogic multi-dtb tool
      Single dtb detected
load dtb from 0x1000000 ......
   Uncompressing Kernel Image ... OK
   kernel loaded at 0x01080000, end = 0x01fba400
   Loading Ramdisk to 33d7a000, end 33e7368d ... OK
   Loading Device Tree to 000000001fff3000, end 000000001ffff6f9 ... OK
signature:
fdt_instaboot: get header err

Starting kernel ...

uboot time: 2772923 us
[    0.000000@0] Initializing cgroup subsys cpu
[    0.000000@0] Initializing cgroup subsys cpuacct
[    0.000000@0] Linux version 3.14.29 (yangyumei@vanlen) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Sat Mar 17 09:22:24 CST 2018
[    0.000000@0] CPU: ARMv71 Processor [410fd034] revision 4
[    0.000000@0] no prop version_code
[    0.000000@0] bootconsole [earlycon0] enabled
get_dvfs_info 0007
INFO:    HDCP22 key read fail!
INFO:    p1d 0
INFO:    pd1 0
root@p201_iptv:/ #

eielise · 25 October 2021 18:38

bl30 dump.txt (145.9 KB)

bumerc · 25 October 2021 22:10

You can only use these commands for the stock u-boot, not for the p211, since the blobs are of different sizes.
I have now fixed FIP signing errors. Please install this IMG via UBT and post the log.

aml_upgrade_package_gxlx

Note: Partition sizes are reduced to a minimum, as your eMMC only has 8GB storage capacity.

eielise · 26 October 2021 12:21

Can’t install！！！

eielise · 26 October 2021 12:21

gxl_p211_v1#
gxl_p211_v1#update
Enter USB burn
Set Addr 17
Get DT cfg
Get DT cfg
Get DT cfg
set CFG

ID[16]
tplcmd[    echo 12345]
12345
[MSG]ret = 0
[info]success
BULKcmd[    low_power]
[info]success
BULKcmd[bootloader_is_old]
[info]success
BULKcmd[erase_bootloader]
[info]success
BULKcmd[reset]
reboot mode: normal
INFO:    PSCI Affinity Map:
INFO:      AffInst: Level 0, MPID 0x0, State ON
INFO:      AffInst: Level 0, MPID 0x1, State OFF
INFO:      AffInst: Level 0, MPID 0x2, State OFF
INFO:      AffInst: Level 0, MPID 0x3, State OFF
bl31 reboot re▒GXLX:BL1:9ac50e:4a8da0;FEAT:ADFD318C:0;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
TE: 96186

BL2 Built : 20:33:18, Oct 17 2017.
gxl ge978680 - liqiang.hou@droid07-sz

Board ID = 3, adc=226
set vcck to 1070 mv
set vddee to 1070 mv
CPU clk: 1200MHz
Skip usb!
0.0;
TE: 2744563

BL2 Built : 15:21:58, Mar 26 2020. gxl g486bc38 - gongwei.chen@droid11-sz

set vcck to 1120 mv
set vddee to 1000 mv
Board ID = 3
CPU clk: 1200MHz
BL2 USB
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0+1 @ 792MHz - FAIL
DDR3 chl: Rank0 @ 792MHz
bist_test rank: 0 21 00 43 2d 11 4a 1f 00 3e 30 15 4c 20 00 41 2f 13 4b 1e 00 3c 30 14 4c 725   - PASS

Rank0: 1024MB(auto)-2T-11
Set ddr ssc: ppm1000-
Load fip header from USB, src: 0x0000c000, des: 0x01400000, size: 0x00004000, part: 0
New fip structure!
Load bl30 from USB, src: 0x00010000, des: 0x013c0000, size: 0x0000d600, part: 0
Load bl31 from USB, src: 0x00020000, des: 0x05100000, size: 0x0002c400, part: 0
0002c400Load bl33 from USB, src: 0x00050000, des: 0x01000000, size: 0x00080a00, part: 0
NOTICE:  BL3-1: v1.0(release):f5121da90
NOTICE:  BL3-1: Built : 20:18:22, Nov 22 2019
NOTICE:  BL3-1: GXL normal boot!
NOTICE:  BL3-1: BL33 decompress fail
NOTICE:  BL3-1: ERROR! GXL FIP HDR process fail 4!
mpu_config_enable:system pre init ok
dmc sec lock
[Image: gxl_v1.1.3394-7d43064d5 2020-05-07 15:37:15 gongwei.chen@droid11-sz]
OPS=0xc1
26 0a c1 00 f7 d1 f1 21 3d 41 65 dd 84 f5 c4 f7
[3.522747 Inits done]
secure task start!
high task start!
low task start!
ERROR:   Error initializing runtime service opteed_fast

eielise · 27 October 2021 05:38

It’s really like i install the img of you asked me replace 3 files by myself last time.

eielise · 27 October 2021 13:42

What should i do next?

bumerc · 27 October 2021 19:43

check your PM, install the update

eielise · 28 October 2021 05:30

Success！

gxl_p211_v1#update
Enter USB burn
Set Addr 6
Get DT cfg
Get DT cfg
Get DT cfg
set CFG

ID[16]
tplcmd[    echo 12345]
12345
[MSG]ret = 0
[info]success
BULKcmd[    low_power]
[info]success
BULKcmd[bootloader_is_old]
[info]success
BULKcmd[erase_bootloader]
[info]success
BULKcmd[reset]
reboot mode: normal
INFO:    PSCI Affinity Map:
INFO:      AffInst: Level 0, MPID 0x0, State ON
INFO:      AffInst: Level 0, MPID 0x1, State OFF
INFO:      AffInst: Level 0, MPID 0x2, State OFF
INFO:      AffInst: Level 0, MPID 0x3, State OFF
bl31 reboot re▒GXLX:BL1:9ac50e:4a8da0;FEAT:ADFD318C:0;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
TE: 96177

BL2 Built : 20:33:18, Oct 17 2017.
gxl ge978680 - liqiang.hou@droid07-sz

Board ID = 3, adc=227
set vcck to 1070 mv
set vddee to 1070 mv
CPU clk: 1200MHz
Skip usb!
0.0;
TE: 2783560

BL2 Built : 16:43:57, Apr  3 2019. gxl gf3484f5 - luan.yuan@droid15-sz

set vcck to 1120 mv
set vddee to 1000 mv
Board ID = 3
CPU clk: 1200MHz
BL2 USB
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0+1 @ 792MHz - FAIL
DDR3 chl: Rank0 @ 792MHz
bist_test rank: 0 22 00 44 2d 0d 4d 1f 00 3f 32 14 50 21 00 43 30 10 50 1e 00 3c 30 12 4f 725   - PASS

Rank0: 1024MB-2T-11
Load fip header from USB, src: 0x0000c000, des: 0x01400000, size: 0x00004000, part: 0
New fip structure!
Load bl30 from USB, src: 0x00010000, des: 0x013c0000, size: 0x0000d600, part: 0
Load bl31 from USB, src: 0x00020000, des: 0x05100000, size: 0x0002b400, part: 0
Load bl33 from USB, src: 0x0004c000, des: 0x01000000, size: 0x00083200, part: 0
NOTICE:  BL3-1: v1.0(release):7864fbc
NOTICE:  BL3-1: Built : 17:15:18, Mar  5 2019
NOTICE:  BL3-1: GXL normal boot!
NOTICE:  BL3-1: BL33 decompress pass
mpu_config_enable:system pre init ok
dmc sec lock
[Image: gxl_v1.1.3394-7d43064d5 2020-05-07 15:37:15 gongwei.chen@droid11-sz]
OPS=0xc1
26 0a c1 00 f7 d1 f1 21 3d 41 65 dd 84 f5 c4 f7
[3.537639 Inits done]
secure task start!
high task start!
low task start!
ERROR:   Error initializing runtime service opteed_fast


U-Boot 2015.01-gabeeb4952b-dirty (Apr 25 2021 - 21:29:24)

DRAM:  1 GiB
Relocation Offset is: 36e78000
mmu cfg end: 0x40000000
mmu cfg end: 0x40000000
[MSG]MMC init in usb
aml_priv->desc_buf = 0x0000000033e78640
aml_priv->desc_buf = 0x0000000033e7a980
SDIO Port B: 0, SDIO Port C: 1
InUsbBurn
[MSG]sof
Set Addr 8
Get DT cfg
Get DT cfg
Get DT cfg
set CFG

ID[16]
tplcmd[    echo 12345]
12345
[MSG]ret = 0
[info]success
BULKcmd[    low_power]
[info]success

ID[16]
tplcmd[    download mem dtb normal 120832]
[MSG]Down(mem) part(dtb) sz(0x1d800) fmt(normal)
[MSG]totalSlotNum = 0, nextWriteBackSlot 2
[info]success
[MSG]Burn Start...
[MSG]load dt.img to 0x0000000001000000, sz=0x1d800
[MSG]Burn complete
BULKcmd[download get_status]
[info]success
BULKcmd[disk_initial 1]
      Amlogic multi-dtb tool
      Multi dtb detected
      Multi dtb tool version: v2 .
      Support 2 dtbs.
        aml_dt soc: gxl platform: p211 variant: 1g
        dtb 0 soc: gxl   plat: p211   vari: 1g
        dtb 1 soc: gxlx   plat: p261   vari: 1g
      Find match dtb: 0
start dts,buffer=0000000001000000,dt_addr=0000000001000800
get_partition_from_dts() 92: ret 0
      Amlogic multi-dtb tool
      Multi dtb detected
      Multi dtb tool version: v2 .
      Support 2 dtbs.
        aml_dt soc: gxl platform: p211 variant: 1g
        dtb 0 soc: gxl   plat: p211   vari: 1g
        dtb 1 soc: gxlx   plat: p261   vari: 1g
      Find match dtb: 0
parts: 17
00:      logo   0000000001000000 1
01:  recovery   0000000001800000 1
02:      misc   0000000000800000 1
03:      dtbo   0000000000800000 1
04:  cri_data   0000000000800000 2
05:     param   0000000001000000 2
06:      boot   0000000001000000 1
set has_boot_slot = 0
07:       rsv   0000000001000000 1
08:  metadata   0000000001000000 1
09:    vbmeta   0000000000200000 1
10:       tee   0000000002000000 1
11:    vendor   000000000fa00000 1
12:       odm   0000000008000000 1
13:    system   000000003e800000 1
14:   product   0000000008000000 1
15:     cache   0000000046000000 2
16:      data   ffffffffffffffff 4
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 400000
emmc/sd response timeout, cmd8, cmd->cmdarg=0x1aa, status=0x3ff2800
emmc/sd response timeout, cmd55, cmd->cmdarg=0x0, status=0x3ff2800
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 40000000
init_part() 297: PART_TYPE_AML
[mmc_init] mmc init success
_cmp_iptbl()-620: partition count is not same 20:16
mmc_device_init()-1354: update rsv with dtb!
init_part() 297: PART_TYPE_AML
eMMC/TSD partition table have been checked OK!
check pattern failed,need to write
several 0x55aa55aa pattern blocks write OK
crc32_s:0x1577dad == storage crc_pattern:0x1577dad!!!
check magic failed,need to write
several 0xff00ff pattern blocks write OK
crc32_s:0x8b2a7ae8 == storage crc_pattern:0xee152b83!!!
check random failed,need to write
several 0x52414e44 pattern blocks write OK
crc32_s:0x8b2a7ae8 == storage crc_pattern:0x79f50f07!!!
XXXXXXX======enter EMMC boot======XXXXXX
co-phase 0x2, tx-dly 0, clock 40000000
co-phase 0x2, tx-dly 0, clock 40000000
co-phase 0x2, tx-dly 0, clock 400000
emmc/sd response timeout, cmd8, cmd->cmdarg=0x1aa, status=0x3ff2800
emmc/sd response timeout, cmd55, cmd->cmdarg=0x0, status=0x3ff2800
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 40000000
init_part() 297: PART_TYPE_AML
[mmc_init] mmc init success
switch to partitions #0, OK
mmc1(part 0) is current device
Device: SDIO Port C
Manufacturer ID: 70
OEM: 100
Name: T2270
Tran Speed: 52000000
Rd Block Len: 512
MMC version 5.0
High Capacity: Yes
Capacity: (0x1c8000000 Bytes) 7.1 GiB
mmc clock: 40000000
Bus Width: 8-bit
[store]amlmmc erase 1emmckey_is_protected(): protect
start = 0,end = 57343
start = 221184,end = 14942207
Erasing blocks 0 to 8192 @ boot0
start = 0,end = 8191
Erasing blocks 0 to 8192 @ boot1
start = 0,end = 8191
[MSG]usb producing env_relocate
mmc env offset: 0x4d400000
*** Warning - bad CRC, using default environment

Saving Environment to aml-storage...
mmc env offset: 0x4d400000
Writing to MMC(1)... done
      Amlogic multi-dtb tool
      Multi dtb detected
      Multi dtb tool version: v2 .
      Support 2 dtbs.
        aml_dt soc: gxl platform: p211 variant: 1g
        dtb 0 soc: gxl   plat: p211   vari: 1g
        dtb 1 soc: gxlx   plat: p261   vari: 1g
      Find match dtb: 0
[MSG]to erase ddr parameters
[info]success

ID[16]
tplcmd[download store _aml_dtb normal 120832]
[MSG]Down(store) part(_aml_dtb) sz(0x1d800) fmt(normal)
[MSG]totalSlotNum = 0, nextWriteBackSlot 2
[info]success
[MSG]Burn Start...
[MSG]optimus_download_dtb_image:dataSzReceived=0x1d800
start erase dtb......
dev # 1,  , several blocks erased OK
[store]To run cmd[emmc dtb_write 0x0000000007700000 0x40000]
dtb_write()-3737: valid 0
dtb_write()-3757: new stamp 0, checksum 0x283e0ce2, version 1, magic A~D
      Amlogic multi-dtb tool
      Multi dtb detected
      Multi dtb tool version: v2 .
      Support 2 dtbs.
        aml_dt soc: gxl platform: p211 variant: 1g
        dtb 0 soc: gxl   plat: p211   vari: 1g
        dtb 1 soc: gxlx   plat: p261   vari: 1g
      Find match dtb: 0
start dts,buffer=0000000033e86d30,dt_addr=0000000033e87530
      Amlogic multi-dtb tool
      Multi dtb detected
      Multi dtb tool version: v2 .
      Support 2 dtbs.
        aml_dt soc: gxl platform: p211 variant: 1g
        dtb 0 soc: gxl   plat: p211   vari: 1g
        dtb 1 soc: gxlx   plat: p261   vari: 1g
      Find match dtb: 0
start dts,buffer=0000000007700000,dt_addr=0000000007700800
get_partition_from_dts() 92: ret 0
      Amlogic multi-dtb tool
      Multi dtb detected
      Multi dtb tool version: v2 .
      Support 2 dtbs.
        aml_dt soc: gxl platform: p211 variant: 1g
        dtb 0 soc: gxl   plat: p211   vari: 1g
        dtb 1 soc: gxlx   plat: p261   vari: 1g
      Find match dtb: 0
parts: 17
00:      logo   0000000001000000 1
01:  recovery   0000000001800000 1
02:      misc   0000000000800000 1
03:      dtbo   0000000000800000 1
04:  cri_data   0000000000800000 2
05:     param   0000000001000000 2
06:      boot   0000000001000000 1
set has_boot_slot = 0
07:       rsv   0000000001000000 1
08:  metadata   0000000001000000 1
09:    vbmeta   0000000000200000 1
10:       tee   0000000002000000 1
11:    vendor   000000000fa00000 1
12:       odm   0000000008000000 1
13:    system   000000003e800000 1
14:   product   0000000008000000 1
15:     cache   0000000046000000 2
16:      data   ffffffffffffffff 4
init_part() 297: PART_TYPE_AML
partition table success
[MSG]Burn complete
BULKcmd[download get_status]
[info]success
BULKcmd[verify sha1sum 278cdd8078f826cdd9f5578222e6d5379670ca3e]
[store]To run cmd[emmc dtb_read 0x0000000007700000 0x40000]
dtb_read_shortcut()-3534: short cut in...
[MSG]VERIFY OK
[info]success

ID[16]
tplcmd[download store boot normal 9977856]
[MSG]flash LOGIC partCap 0x1000000B
[MSG]Down(store) part(boot) sz(0x984000) fmt(normal)
[MSG]totalSlotNum = 0, nextWriteBackSlot 1
[info]success
[MSG]Burn Start...
[MSG]Burn complete
BULKcmd[download get_status]
[info]success
BULKcmd[verify sha1sum e07f698acb22c210c708f387ec1f377ca3008a84]
[MSG]Verify Start...
[MSG]To verify part boot in fmt normal
[MSG]Verify End
[MSG]VERIFY OK
[info]success

ID[16]
tplcmd[download store dtbo normal 438]
[MSG]flash LOGIC partCap 0x800000B
[MSG]Down(store) part(dtbo) sz(0x1b6) fmt(normal)
[MSG]totalSlotNum = 0, nextWriteBackSlot 1
[info]success
[MSG]Burn Start...
[MSG]Burn complete
BULKcmd[download get_status]
[info]success
BULKcmd[verify sha1sum 7e63f51086267cbfc7ea71d55d89d967a9d2916a]
[MSG]Verify Start...
[MSG]To verify part dtbo in fmt normal
[MSG]Verify End
[MSG]VERIFY OK
[info]success

ID[16]
tplcmd[download store logo normal 5048640]
[MSG]flash LOGIC partCap 0x1000000B
[MSG]Down(store) part(logo) sz(0x4d0940) fmt(normal)
[MSG]totalSlotNum = 0, nextWriteBackSlot 1
[info]success
[MSG]Burn Start...
[MSG]Burn complete
BULKcmd[download get_status]
[info]success
BULKcmd[verify sha1sum 1abddad2fa6742ed3a15dd50ca046983df124b62]
[MSG]Verify Start...
[MSG]To verify part logo in fmt normal
[MSG]Verify End
[MSG]VERIFY OK
[info]success

ID[16]
tplcmd[download store odm sparse 573516]
[MSG]flash LOGIC partCap 0x8000000B
[MSG]Down(store) part(odm) sz(0x8c04c) fmt(sparse)
[MSG]totalSlotNum = 0, nextWriteBackSlot 9
[info]success
[MSG]Burn Start...
[MSG]Burn complete
BULKcmd[download get_status]
[info]success
BULKcmd[verify sha1sum 1492468e470f27363a93dd70fec61c7b389366dc]
[MSG]Verify Start...
[MSG]To verify part odm in fmt sparse
[MSG]Verify End
[MSG]VERIFY OK
[info]success

ID[16]
tplcmd[download store product sparse 11673676]
[MSG]flash LOGIC partCap 0x8000000B
[MSG]Down(store) part(product) sz(0xb2204c) fmt(sparse)
[MSG]totalSlotNum = 0, nextWriteBackSlot 179
[info]success
[MSG]Burn Start...
[MSG]Burn complete
BULKcmd[download get_status]
[info]success
BULKcmd[verify sha1sum 0089d662ae864972ff9886cb1cab6ea3e14c7fd1]
[MSG]Verify Start...
[MSG]To verify part product in fmt sparse
[MSG]Verify End
[MSG]VERIFY OK
[info]success

ID[16]
tplcmd[download store recovery normal 16738304]
[MSG]flash LOGIC partCap 0x1800000B
[MSG]Down(store) part(recovery) sz(0xff6800) fmt(normal)
[MSG]totalSlotNum = 0, nextWriteBackSlot 1
[info]success
[MSG]Burn Start...
[MSG]Burn complete
BULKcmd[download get_status]
[info]success
BULKcmd[verify sha1sum d6064110e87d325b882e17fe8a88f29e51e57de4]
[MSG]Verify Start...
[MSG]To verify part recovery in fmt normal
[MSG]Verify End
[MSG]VERIFY OK
[info]success

ID[16]
tplcmd[download store system sparse 970301636]
[MSG]flash LOGIC partCap 0x3e800000B
[MSG]Down(store) part(system) sz(0x39d5a0c4) fmt(sparse)
[MSG]totalSlotNum = 0, nextWriteBackSlot 1024
[info]success
[MSG]Burn Start...
[MSG]Burn complete
Downloading %100
BULKcmd[download get_status]
[info]success
BULKcmd[verify sha1sum 2d39562a66a3da48f8dbb314b32298234bae4ba8]
[MSG]Verify Start...
[MSG]To verify part system in fmt sparse
[MSG]Verify End
[MSG]VERIFY OK
[info]success
[WRN]total 0x200 < tranferred 0x400

ID[16]
tplcmd[download store vbmeta normal 4096]
[MSG]flash LOGIC partCap 0x200000B
[MSG]Down(store) part(vbmeta) sz(0x1000) fmt(normal)
[MSG]totalSlotNum = 0, nextWriteBackSlot 1
[info]success
[MSG]Burn Start...
[MSG]Burn complete
BULKcmd[download get_status]
[info]success
BULKcmd[verify sha1sum ebc223238e8f93d5bb549a7db978aac490db19bc]
[MSG]Verify Start...
[MSG]To verify part vbmeta in fmt normal
[MSG]Verify End
[MSG]VERIFY OK
[info]success

ID[16]
tplcmd[download store vendor sparse 235589756]
[MSG]flash LOGIC partCap 0xfa00000B
[MSG]Down(store) part(vendor) sz(0xe0ad07c) fmt(sparse)
[MSG]totalSlotNum = 0, nextWriteBackSlot 1024
[info]success
[MSG]Burn Start...
[MSG]Burn complete
BULKcmd[download get_status]
[info]success
BULKcmd[verify sha1sum 8dfac62f1ee3887506858f99146aeb9f8b7074c1]
[MSG]Verify Start...
[MSG]To verify part vendor in fmt sparse
[MSG]Verify End
[MSG]VERIFY OK
[info]success

ID[16]
tplcmd[download store bootloader normal 851968]
[MSG]Down(store) part(bootloader) sz(0xd0000) fmt(normal)
[MSG]totalSlotNum = 0, nextWriteBackSlot 13
[info]success
[MSG]Burn Start...
amlmmc_write_bootloader() 573: map 0x7
Wrting blocks 1 to 1664 @ user
Wrting blocks 1 to 1664 @ boot0
boot_info.rsv_base_addr :       12000
boot_info.ddr.addr      :       4000
boot_info.ddr.size      :       0004
boot_info.version       :       0001
boot_info.checksum      :       16005
Wrting blocks 1 to 1664 @ boot1
boot_info.rsv_base_addr :       12000
boot_info.ddr.addr      :       4000
boot_info.ddr.size      :       0004
boot_info.version       :       0001
boot_info.checksum      :       16005
[MSG]Burn complete
BULKcmd[download get_status]
[info]success
BULKcmd[verify sha1sum d9fe7070161a203b948de8f8e03d0393904446ed]
mmc switch to boot0 success
mmc switch to boot1 success
mmc switch to user success
[MSG]VERIFY OK
[info]success
BULKcmd[save_setting]
## save_setting ##
[MSG]Set upgrade_step to 2
Saving Environment to aml-storage...
mmc env offset: 0x4d400000
Writing to MMC(1)... done
[info]success
BULKcmd[burn_complete 3]
[MSG]Pls un-plug USB line to poweroff
[info]success

eielise · 28 October 2021 05:33

The new IMG start log：

 GXLX:BL1:9ac50e:4a8da0;FEAT:ADFD318C:0;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
TE: 115608

BL2 Built : 16:43:57, Apr  3 2019. gxl gf3484f5 - luan.yuan@droid15-sz

set vcck to 1120 mv
set vddee to 1000 mv
Board ID = 3
CPU clk: 1200MHz
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0+1 @ 792MHz - FAIL
DDR3 chl: Rank0 @ 792MHz
bist_test rank: 0 23 01 45 2d 0d 4d 1f 00 3f 32 14 50 21 00 42 30 11 50 1e 00 3c 30 11 50 725   - PASS

Rank0: 1024MB-2T-11
AddrBus test pass!
eMMC boot @ 0
sw8 s
emmc switch 3 ok
Authentication key not yet programmed
get rpmb counter error 0x00000007
emmc switch 0 ok
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000, part: 0
New fip structure!
Load bl30 from eMMC, src: 0x00010200, des: 0x013c0000, size: 0x0000d600, part: 0
Load bl31 from eMMC, src: 0x00020200, des: 0x05100000, size: 0x0002b400, part: 0
Load bl33 from eMMC, src: 0x0004c200, des: 0x01000000, size: 0x00083200, part: 0
NOTICE:  BL3-1: v1.0(release):7864fbc
NOTICE:  BL3-1: Built : 17:15:18, Mar  5 2019
NOTICE:  BL3-1: GXL normal boot!
NOTICE:  BL3-1: BL33 decompress pass
mpu_config_enable:system pre init ok
dmc sec lock
[Image: gxl_v1.1.3394-7d43064d5 2020-05-07 15:37:15 gongwei.chen@droid11-sz]
OPS=0xc1
26 0a c1 00 f7 d1 f1 21 3d 41 65 dd 84 f5 c4 f7
[0.565003 Inits done]
secure task start!
high task start!
low task start!
ERROR:   Error initializing runtime service opteed_fast


U-Boot 2015.01-gabeeb4952b-dirty (Apr 25 2021 - 21:29:24)

DRAM:  1 GiB
Relocation Offset is: 36e78000
mmu cfg end: 0x40000000
mmu cfg end: 0x40000000
register usb cfg[0][1] = 0000000037f4f2b0
[CANVAS]canvas init
boot_device_flag : 1
Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
init bus_cycle=6, bus_timing=7, system=5.0ns
reset failed
get_chip_type and ret:fffffffe
get_chip_type and ret:fffffffe
chip detect failed and ret:fffffffe
nandphy_init failed and ret=0xfffffff1
MMC:   aml_priv->desc_buf = 0x0000000033e786b0
aml_priv->desc_buf = 0x0000000033e7a9f0
SDIO Port B: 0, SDIO Port C: 1
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 400000
emmc/sd response timeout, cmd8, cmd->cmdarg=0x1aa, status=0x1ff2800
emmc/sd response timeout, cmd55, cmd->cmdarg=0x0, status=0x1ff2800
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 40000000
init_part() 297: PART_TYPE_AML
[mmc_init] mmc init success
      Amlogic multi-dtb tool
      Multi dtb detected
      Multi dtb tool version: v2 .
      Support 2 dtbs.
        aml_dt soc: gxl platform: p211 variant: 1g
        dtb 0 soc: gxl   plat: p211   vari: 1g
        dtb 1 soc: gxlx   plat: p261   vari: 1g
      Find match dtb: 0
start dts,buffer=0000000033e7d240,dt_addr=0000000033e7da40
get_partition_from_dts() 92: ret 0
      Amlogic multi-dtb tool
      Multi dtb detected
      Multi dtb tool version: v2 .
      Support 2 dtbs.
        aml_dt soc: gxl platform: p211 variant: 1g
        dtb 0 soc: gxl   plat: p211   vari: 1g
        dtb 1 soc: gxlx   plat: p261   vari: 1g
      Find match dtb: 0
parts: 17
00:      logo   0000000001000000 1
01:  recovery   0000000001800000 1
02:      misc   0000000000800000 1
03:      dtbo   0000000000800000 1
04:  cri_data   0000000000800000 2
05:     param   0000000001000000 2
06:      boot   0000000001000000 1
set has_boot_slot = 0
07:       rsv   0000000001000000 1
08:  metadata   0000000001000000 1
09:    vbmeta   0000000000200000 1
10:       tee   0000000002000000 1
11:    vendor   000000000fa00000 1
12:       odm   0000000008000000 1
13:    system   000000003e800000 1
14:   product   0000000008000000 1
15:     cache   0000000046000000 2
16:      data   ffffffffffffffff 4
init_part() 297: PART_TYPE_AML
eMMC/TSD partition table have been checked OK!
crc32_s:0x1577dad == storage crc_pattern:0x1577dad!!!
crc32_s:0xee152b83 == storage crc_pattern:0xee152b83!!!
crc32_s:0x79f50f07 == storage crc_pattern:0x79f50f07!!!
mmc env offset: 0x4d400000
In:    serial
Out:   serial
Err:   serial
aml log : internal sys error!
reboot_mode=cold_boot
[store]To run cmd[emmc dtb_read 0x1000000 0x40000]
_verify_dtb_checksum()-3476: calc 283e0ce2, store 283e0ce2
_verify_dtb_checksum()-3476: calc 283e0ce2, store 283e0ce2
dtb_read()-3691: total valid 2
update_old_dtb()-3672: do nothing
      Amlogic multi-dtb tool
      Multi dtb detected
      Multi dtb tool version: v2 .
      Support 2 dtbs.
        aml_dt soc: gxl platform: p211 variant: 1g
        dtb 0 soc: gxl   plat: p211   vari: 1g
        dtb 1 soc: gxlx   plat: p261   vari: 1g
      Find match dtb: 0
vpu: error: invalid vpu
vpu: error: invalid vpu
vpp: vpp_init

No dtb matched！

bumerc · 28 October 2021 07:26

No, dtb has been installed successfully. Disconnect the uart connection and try to boot into Android. See if the bootloader logo appears on the TV

eielise · 28 October 2021 11:06

unfortunately，nothing appears on the screen.

bumerc · 28 October 2021 12:34

Please run “store init 3” and install only the uboot, the dtb, and the kernel. See if the kernel is loaded. Probably the emmc capacity for android 9 is not sufficient.

fatload usb 0 ${loadaddr} bootloader.PARTITION

store rom_write ${loadaddr} 0 100000

usb 0 ${loadaddr} _aml_dtb.PARTITION

store dtb write ${loadaddr}

usb_update boot boot.PARTITION

eielise · 28 October 2021 14:04

Should I flash back to the original img or enter the command directly?

eielise · 30 October 2021 10:01

gxl_p211_v1#store init 3
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
[mmc_init] mmc init success
switch to partitions #0, OK
mmc1(part 0) is current device
Device: SDIO Port C
Manufacturer ID: 70
OEM: 100
Name: T2270
Tran Speed: 52000000
Rd Block Len: 512
MMC version 5.0
High Capacity: Yes
Capacity: 7.1 GiB
mmc clock: 40000000
Bus Width: 8-bit
[store]amlmmc erase 1emmckey_is_protected : protect
 start = 0,end = 57343


Caution! Your devices Erase group is 0x400
The erase range would be change to 0x36000~0xe3ffff

start = 221184,end = 14942206
gxl_p211_v1#usb start
(Re)start USB...
USB0:   USB3.0 XHCI init start
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices... init_part() 278: PART_TYPE_DOS
1 Storage Device(s) found
gxl_p211_v1#fatload usb 0 ${loadaddr} bootloader.PARTITION
reading bootloader.PARTITION
868352 bytes read in 470 ms (1.8 MiB/s)
gxl_p211_v1#store rom_write ${loadaddr} 0 100000
mmc switch to boot0 success
mmc switch to boot1 success
mmc switch to user success
gxl_p211_v1#usb 0 ${loadaddr} _aml_dtb.PARTITION
usb - USB sub-system

Usage:
usb start - start (scan) USB controller
usb reset - reset (rescan) USB controller
usb stop [f] - stop USB [f]=force stop
usb tree - show USB device tree
usb info [dev] - show available USB devices
usb test [dev] [port] [mode] - set USB 2.0 test mode
    (specify port 0 to indicate the device's upstream port)
    Available modes: J, K, S[E0_NAK], P[acket], F[orce_Enable]
usb storage - show details of USB storage devices
usb dev [dev] - show or set current USB storage device
usb part [dev] - print partition table of one or all USB storage    devices
usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'
    to memory address `addr'
usb write addr blk# cnt - write `cnt' blocks starting at block `blk#'
    from memory address `addr'
gxl_p211_v1#usb device0 ${loadaddr} _aml_dtb.PARTITION

USB device 0: Vendor: Kingston Rev:  Prod: DataTraveler 3.0
            Type: Removable Hard Disk
            Capacity: 14755.2 MB = 14.4 GB (30218842 x 512)
gxl_p211_v1#usb device 0 ${loadaddr} _aml_dtb.PARTITION

USB device 0: Vendor: Kingston Rev:  Prod: DataTraveler 3.0
            Type: Removable Hard Disk
            Capacity: 14755.2 MB = 14.4 GB (30218842 x 512)
gxl_p211_v1#fatload usb 0 ${loadaddr} _aml_dtb.PARTITION
reading _aml_dtb.PARTITION
120832 bytes read in 81 ms (1.4 MiB/s)
gxl_p211_v1#store dtb write ${loadaddr}
[store]To run cmd[emmc dtb_write 1080000 0x40000]
dtb_write()-1140: valid 2
dtb_write()-1160: new stamp 1, checksum 0xba7dd51c, version 1, magic A~D
dtb magic 5f4c4d41
      Amlogic multi-dtb tool
      Multi dtb detected
      2layers board, board id use 7
      Multi dtb tool version: v2 .
      Support 2 dtbs.
        aml_dt soc: gxlx platform: p261 variant: 1g
        dtb 0 soc: gxl   plat: p261   vari: 1g
        dtb 1 soc: gxl   plat: p271   vari: 1g
      Not match any dtb.
start dts,buffer=0000000001080000,dt_addr=0000000001080000
check_valid_dts: FDT_ERR_BADMAGIC
gxl_p211_v1#usb_update boot boot.PARTITION
usb_start_count 0
(Re)start USB...
USB0:   USB3.0 XHCI init start
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices... init_part() 278: PART_TYPE_DOS
1 Storage Device(s) found
[fat]Filesize is 0x795f9fB[7M]
[MSG]flash LOGIC partCap 0x2000000B
[MSG]Down(store) part(boot) sz(0x795f9f) fmt(normal)
[MSG]totalSlotNum = 0, nextWriteBackSlot 1
[fat]Filesize is 0x795f9fB[7M]
[MSG]Burn Start...
[fat]0x:leftSz f9f < BPS 1000, gotSz 5f9f
[MSG]Burn complete
BURN boot.PARTITION to part boot OK!
=====>Burn part boot in fmt normal OK<======

gxl_p211_v1#reboot
reboot use default mode: normal
INFO:    PSCI Affinity Map:
INFO:      AffInst: Level 0, MPID 0x0, State ON
INFO:      AffInst: Level 0, MPID 0x1, State OFF
INFO:      AffInst: Level 0, MPID 0x2, State OFF
INFO:      AffInst: Level 0, MPID 0x3, State OFF
bl31 reb▒GXLX:BL1:9ac50e:4a8da0;FEAT:ADFD318C:0;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
TE: 100075

BL2 Built : 15:21:58, Mar 26 2020. gxl g486bc38 - gongwei.chen@droid11-sz

set vcck to 1120 mv
set vddee to 1000 mv
Board ID = 3
CPU clk: 1200MHz
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0+1 @ 792MHz - FAIL
DDR3 chl: Rank0 @ 792MHz
bist_test rank: 0 20 00 41 2d 11 49 1e 00 3d 2f 14 4b 20 00 41 2f 14 4b 1e 00 3c 30 14 4c 725   - PASS

Rank0: 1024MB(auto)-2T-11
AddrBus test pass!
Set ddr ssc: ppm1000-
eMMC boot @ 0
sw8 s
emmc switch 3 ok
Authentication key not yet programmed
get rpmb counter error 0x00000007
emmc switch 0 ok
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000, part: 0
New fip structure!
Load bl30 from eMMC, src: 0x00010200, des: 0x013c0000, size: 0x0000d600, part: 0
Load bl31 from eMMC, src: 0x00020200, des: 0x05100000, size: 0x0002c400, part: 0
0002c400Load bl33 from eMMC, src: 0x00050200, des: 0x01000000, size: 0x00080a00, part: 0
NOTICE:  BL3-1: v1.0(release):f5121da90
NOTICE:  BL3-1: Built : 20:18:22, Nov 22 2019
NOTICE:  BL3-1: GXL normal boot!
NOTICE:  BL3-1: BL33 decompress fail
NOTICE:  BL3-1: ERROR! GXL FIP HDR process fail 4!
sha fail.
sha fail.

eielise · 30 October 2021 10:18

gxl_p211_v1#
gxl_p211_v1#store init 3
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
[mmc_init] mmc init success
switch to partitions #0, OK
mmc1(part 0) is current device
Device: SDIO Port C
Manufacturer ID: 70
OEM: 100
Name: T2270
Tran Speed: 52000000
Rd Block Len: 512
MMC version 5.0
High Capacity: Yes
Capacity: 7.1 GiB
mmc clock: 40000000
Bus Width: 8-bit
[store]amlmmc erase 1emmckey_is_protected : protect
 start = 0,end = 57343


Caution! Your devices Erase group is 0x400
The erase range would be change to 0x36000~0xe3ffff

start = 221184,end = 14942206
gxl_p211_v1#fatload usb 0 ${loadaddr} bootloader.PARTITION
** Bad device usb 0 **
gxl_p211_v1#usb start
(Re)start USB...
USB0:   USB3.0 XHCI init start
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices... init_part() 278: PART_TYPE_DOS
1 Storage Device(s) found
gxl_p211_v1#fatload usb 0 ${loadaddr} bootloader.PARTITION
reading bootloader.PARTITION
851968 bytes read in 465 ms (1.7 MiB/s)
gxl_p211_v1#store rom_write ${loadaddr} 0 100000
mmc switch to boot0 success
mmc switch to boot1 success
mmc switch to user success
gxl_p211_v1#usb 0 ${loadaddr} _aml_dtb.PARTITION
usb - USB sub-system

Usage:
usb start - start (scan) USB controller
usb reset - reset (rescan) USB controller
usb stop [f] - stop USB [f]=force stop
usb tree - show USB device tree
usb info [dev] - show available USB devices
usb test [dev] [port] [mode] - set USB 2.0 test mode
    (specify port 0 to indicate the device's upstream port)
    Available modes: J, K, S[E0_NAK], P[acket], F[orce_Enable]
usb storage - show details of USB storage devices
usb dev [dev] - show or set current USB storage device
usb part [dev] - print partition table of one or all USB storage    devices
usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'
    to memory address `addr'
usb write addr blk# cnt - write `cnt' blocks starting at block `blk#'
    from memory address `addr'
gxl_p211_v1#fatload usb 0 ${loadaddr} _aml_dtb.PARTITION
** Bad device usb 0 **
gxl_p211_v1#usb 0 ${loadaddr} _aml_dtb.PARTITION
Unknown command 'usb' - try 'help'
gxl_p211_v1#usb start
(Re)start USB...
USB0:   USB3.0 XHCI init start
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices... init_part() 278: PART_TYPE_DOS
1 Storage Device(s) found
gxl_p211_v1#fatload usb 0 ${loadaddr} _aml_dtb.PARTITION
reading _aml_dtb.PARTITION
120832 bytes read in 81 ms (1.4 MiB/s)
gxl_p211_v1#store dtb write ${loadaddr}
[store]To run cmd[emmc dtb_write 1080000 0x40000]
dtb_write()-1140: valid 2
dtb_write()-1160: new stamp 1, checksum 0xf6dc45ff, version 1, magic A~D
dtb magic 5f4c4d41
      Amlogic multi-dtb tool
      Multi dtb detected
      2layers board, board id use 7
      Multi dtb tool version: v2 .
      Support 2 dtbs.
        aml_dt soc: gxlx platform: p261 variant: 1g
        dtb 0 soc: gxl   plat: p211   vari: 1g
        dtb 1 soc: gxlx   plat: p261   vari: 1g
      Find match dtb: 1
start dts,buffer=0000000001080000,dt_addr=000000000108f000
dtb magic 5f4c4d41
      Amlogic multi-dtb tool
      Multi dtb detected
      2layers board, board id use 7
      Multi dtb tool version: v2 .
      Support 2 dtbs.
        aml_dt soc: gxlx platform: p261 variant: 1g
        dtb 0 soc: gxl   plat: p211   vari: 1g
        dtb 1 soc: gxlx   plat: p261   vari: 1g
      Find match dtb: 1
start dts,buffer=0000000001080000,dt_addr=000000000108f000
      Amlogic multi-dtb tool
      Multi dtb detected
      2layers board, board id use 7
      Multi dtb tool version: v2 .
      Support 2 dtbs.
        aml_dt soc: gxlx platform: p261 variant: 1g
        dtb 0 soc: gxl   plat: p211   vari: 1g
        dtb 1 soc: gxlx   plat: p261   vari: 1g
      Find match dtb: 1
parts: 17
00:      logo   0000000001000000 1
01:  recovery   0000000001800000 1
02:      misc   0000000000800000 1
03:      dtbo   0000000000800000 1
04:  cri_data   0000000000800000 2
05:     param   0000000001000000 2
06:      boot   0000000001000000 1
07:       rsv   0000000001000000 1
08:  metadata   0000000001000000 1
09:    vbmeta   0000000000200000 1
10:       tee   0000000002000000 1
11:    vendor   000000000fa00000 1
12:       odm   0000000008000000 1
13:    system   000000003e800000 1
14:   product   0000000008000000 1
15:     cache   0000000046000000 2
16:      data   ffffffffffffffff 4
_cmp_iptbl()-599: partition count is not same 20:16
mmc_device_init()-1115: update rsv with dtb!
partition table success
gxl_p211_v1#usb_update boot boot.PARTITION
usb_start_count 0
(Re)start USB...
USB0:   USB3.0 XHCI init start
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices... init_part() 278: PART_TYPE_DOS
1 Storage Device(s) found
[fat]Filesize is 0x984000B[9M]
[MSG]flash LOGIC partCap 0x1000000B
[MSG]Down(store) part(boot) sz(0x984000) fmt(normal)
[MSG]totalSlotNum = 0, nextWriteBackSlot 1
[fat]Filesize is 0x984000B[9M]
[MSG]Burn Start...
[MSG]Burn complete
BURN boot.PARTITION to part boot OK!
=====>Burn part boot in fmt normal OK<======

gxl_p211_v1#reboot
reboot use default mode: normal
INFO:    PSCI Affinity Map:
INFO:      AffInst: Level 0, MPID 0x0, State ON
INFO:      AffInst: Level 0, MPID 0x1, State OFF
INFO:      AffInst: Level 0, MPID 0x2, State OFF
INFO:      AffInst: Level 0, MPID 0x3, State OFF
bl31 reb▒GXLX:BL1:9ac50e:4a8da0;FEAT:ADFD318C:0;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
TE: 104253

BL2 Built : 16:43:57, Apr  3 2019. gxl gf3484f5 - luan.yuan@droid15-sz

set vcck to 1120 mv
set vddee to 1000 mv
Board ID = 3
CPU clk: 1200MHz
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0+1 @ 792MHz - FAIL
DDR3 chl: Rank0 @ 792MHz
bist_test rank: 0 21 00 42 2d 0d 4d 1f 00 3e 31 13 4f 21 00 42 30 11 50 1e 00 3c 30 11 4f 725   - PASS

Rank0: 1024MB-2T-11
AddrBus test pass!
eMMC boot @ 0
sw8 s
emmc switch 3 ok
Authentication key not yet programmed
get rpmb counter error 0x00000007
emmc switch 0 ok
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000, part: 0
New fip structure!
Load bl30 from eMMC, src: 0x00010200, des: 0x013c0000, size: 0x0000d600, part: 0
Load bl31 from eMMC, src: 0x00020200, des: 0x05100000, size: 0x0002b400, part: 0
Load bl33 from eMMC, src: 0x0004c200, des: 0x01000000, size: 0x00083200, part: 0
NOTICE:  BL3-1: v1.0(release):7864fbc
NOTICE:  BL3-1: Built : 17:15:18, Mar  5 2019
NOTICE:  BL3-1: GXL normal boot!
NOTICE:  BL3-1: BL33 decompress pass
mpu_config_enable:system pre init ok
dmc sec lock
[Image: gxl_v1.1.3394-7d43064d5 2020-05-07 15:37:15 gongwei.chen@droid11-sz]
OPS=0xc1
26 0a c1 00 f7 d1 f1 21 3d 41 65 dd 84 f5 c4 f7
[0.554730 Inits done]
secure task start!
high task start!
low task start!
ERROR:   Error initializing runtime service opteed_fast


U-Boot 2015.01-gabeeb4952b-dirty (Apr 25 2021 - 21:29:24)

DRAM:  1 GiB
Relocation Offset is: 36e78000
mmu cfg end: 0x40000000
mmu cfg end: 0x40000000
register usb cfg[0][1] = 0000000037f4f2b0
[CANVAS]canvas init
boot_device_flag : 1
Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
init bus_cycle=6, bus_timing=7, system=5.0ns
reset failed
get_chip_type and ret:fffffffe
get_chip_type and ret:fffffffe
chip detect failed and ret:fffffffe
nandphy_init failed and ret=0xfffffff1
MMC:   aml_priv->desc_buf = 0x0000000033e786b0
aml_priv->desc_buf = 0x0000000033e7a9f0
SDIO Port B: 0, SDIO Port C: 1
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 400000
emmc/sd response timeout, cmd8, cmd->cmdarg=0x1aa, status=0x1ff2800
emmc/sd response timeout, cmd55, cmd->cmdarg=0x0, status=0x1ff2800
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 40000000
init_part() 297: PART_TYPE_AML
[mmc_init] mmc init success
      Amlogic multi-dtb tool
      Multi dtb detected
      Multi dtb tool version: v2 .
      Support 2 dtbs.
        aml_dt soc: gxl platform: p211 variant: 1g
        dtb 0 soc: gxl   plat: p211   vari: 1g
        dtb 1 soc: gxlx   plat: p261   vari: 1g
      Find match dtb: 0
start dts,buffer=0000000033e7d240,dt_addr=0000000033e7da40
get_partition_from_dts() 92: ret 0
      Amlogic multi-dtb tool
      Multi dtb detected
      Multi dtb tool version: v2 .
      Support 2 dtbs.
        aml_dt soc: gxl platform: p211 variant: 1g
        dtb 0 soc: gxl   plat: p211   vari: 1g
        dtb 1 soc: gxlx   plat: p261   vari: 1g
      Find match dtb: 0
parts: 17
00:      logo   0000000001000000 1
01:  recovery   0000000001800000 1
02:      misc   0000000000800000 1
03:      dtbo   0000000000800000 1
04:  cri_data   0000000000800000 2
05:     param   0000000001000000 2
06:      boot   0000000001000000 1
set has_boot_slot = 0
07:       rsv   0000000001000000 1
08:  metadata   0000000001000000 1
09:    vbmeta   0000000000200000 1
10:       tee   0000000002000000 1
11:    vendor   000000000fa00000 1
12:       odm   0000000008000000 1
13:    system   000000003e800000 1
14:   product   0000000008000000 1
15:     cache   0000000046000000 2
16:      data   ffffffffffffffff 4
init_part() 297: PART_TYPE_AML
eMMC/TSD partition table have been checked OK!
check pattern failed,need to write
several 0x55aa55aa pattern blocks write OK
crc32_s:0x1577dad == storage crc_pattern:0x1577dad!!!
crc32_s:0xee152b83 == storage crc_pattern:0xee152b83!!!
crc32_s:0x79f50f07 == storage crc_pattern:0x79f50f07!!!
mmc env offset: 0x4d400000
*** Warning - bad CRC, using default environment

Saving Environment to aml-storage...
mmc env offset: 0x4d400000
Writing to MMC(1)... done
In:    serial
Out:   serial
Err:   serial
aml log : internal sys error!
reboot_mode=normal
[store]To run cmd[emmc dtb_read 0x1000000 0x40000]
_verify_dtb_checksum()-3476: calc f6dc45ff, store f6dc45ff
_verify_dtb_checksum()-3476: calc f6dc45ff, store f6dc45ff
dtb_read()-3691: total valid 2
update_old_dtb()-3672: do nothing
      Amlogic multi-dtb tool
      Multi dtb detected
      Multi dtb tool version: v2 .
      Support 2 dtbs.
        aml_dt soc: gxl platform: p211 variant: 1g
        dtb 0 soc: gxl   plat: p211   vari: 1g
        dtb 1 soc: gxlx   plat: p261   vari: 1g
      Find match dtb: 0
vpu: error: invalid vpu
vpu: error: invalid vpu
vpp: vpp_init

eielise · 30 October 2021 14:55

gxl_p211_v1#store disprotect key
[store]disprotect key
gxl_p211_v1#store init 3
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
[mmc_init] mmc init success
switch to partitions #0, OK
mmc1(part 0) is current device
Device: SDIO Port C
Manufacturer ID: 70
OEM: 100
Name: T2270
Tran Speed: 52000000
Rd Block Len: 512
MMC version 5.0
High Capacity: Yes
Capacity: 7.1 GiB
mmc clock: 40000000
Bus Width: 8-bit
[store]amlmmc key
emmc disprotect key
[store]amlmmc erase 1emmckey_is_protected : disprotect
 blkcnt = 14942208
start = 0,end = 14942207
gxl_p211_v1#fatload usb 0 ${loadaddr} bootloader.PARTITION
** Bad device usb 0 **
gxl_p211_v1#usb start
(Re)start USB...
USB0:   USB3.0 XHCI init start
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices... init_part() 278: PART_TYPE_DOS
1 Storage Device(s) found
gxl_p211_v1#fatload usb 0 ${loadaddr} bootloader.PARTITION
reading bootloader.PARTITION
851968 bytes read in 465 ms (1.7 MiB/s)
gxl_p211_v1#store rom_write ${loadaddr} 0 100000
mmc switch to boot0 success
mmc switch to boot1 success
mmc switch to user success
gxl_p211_v1#usb 0 ${loadaddr} _aml_dtb.PARTITION
usb - USB sub-system

Usage:
usb start - start (scan) USB controller
usb reset - reset (rescan) USB controller
usb stop [f] - stop USB [f]=force stop
usb tree - show USB device tree
usb info [dev] - show available USB devices
usb test [dev] [port] [mode] - set USB 2.0 test mode
    (specify port 0 to indicate the device's upstream port)
    Available modes: J, K, S[E0_NAK], P[acket], F[orce_Enable]
usb storage - show details of USB storage devices
usb dev [dev] - show or set current USB storage device
usb part [dev] - print partition table of one or all USB storage    devices
usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'
    to memory address `addr'
usb write addr blk# cnt - write `cnt' blocks starting at block `blk#'
    from memory address `addr'
gxl_p211_v1#usb_update boot boot.PARTITION
usb_start_count 0
(Re)start USB...
USB0:   USB3.0 XHCI init start
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices... init_part() 278: PART_TYPE_DOS
1 Storage Device(s) found
[fat]Filesize is 0x984000B[9M]
[MSG]flash LOGIC partCap 0x2000000B
[MSG]Down(store) part(boot) sz(0x984000) fmt(normal)
[MSG]totalSlotNum = 0, nextWriteBackSlot 1
[fat]Filesize is 0x984000B[9M]
[MSG]Burn Start...
[MSG]Burn complete
BURN boot.PARTITION to part boot OK!
=====>Burn part boot in fmt normal OK<======

gxl_p211_v1#reboot
reboot use default mode: normal
INFO:    PSCI Affinity Map:
INFO:      AffInst: Level 0, MPID 0x0, State ON
INFO:      AffInst: Level 0, MPID 0x1, State OFF
INFO:      AffInst: Level 0, MPID 0x2, State OFF
INFO:      AffInst: Level 0, MPID 0x3, State OFF
bl31 reb▒GXLX:BL1:9ac50e:4a8da0;FEAT:ADFD318C:0;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
TE: 97780

BL2 Built : 16:43:57, Apr  3 2019. gxl gf3484f5 - luan.yuan@droid15-sz

set vcck to 1120 mv
set vddee to 1000 mv
Board ID = 3
CPU clk: 1200MHz
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0+1 @ 792MHz - FAIL
DDR3 chl: Rank0 @ 792MHz
bist_test rank: 0 21 00 42 2c 0d 4c 1f 00 3e 31 13 4f 20 00 41 30 11 4f 1e 00 3d 31 12 50 725   - PASS

Rank0: 1024MB-2T-11
AddrBus test pass!
eMMC boot @ 0
sw8 s
emmc switch 3 ok
Authentication key not yet programmed
get rpmb counter error 0x00000007
emmc switch 0 ok
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000, part: 0
New fip structure!
Load bl30 from eMMC, src: 0x00010200, des: 0x013c0000, size: 0x0000d600, part: 0
Load bl31 from eMMC, src: 0x00020200, des: 0x05100000, size: 0x0002b400, part: 0
Load bl33 from eMMC, src: 0x0004c200, des: 0x01000000, size: 0x00083200, part: 0
NOTICE:  BL3-1: v1.0(release):7864fbc
NOTICE:  BL3-1: Built : 17:15:18, Mar  5 2019
NOTICE:  BL3-1: GXL normal boot!
NOTICE:  BL3-1: BL33 decompress pass
mpu_config_enable:system pre init ok
dmc sec lock
[Image: gxl_v1.1.3394-7d43064d5 2020-05-07 15:37:15 gongwei.chen@droid11-sz]
OPS=0xc1
26 0a c1 00 f7 d1 f1 21 3d 41 65 dd 84 f5 c4 f7
[0.548735 Inits done]
secure task start!
high task start!
low task start!
ERROR:   Error initializing runtime service opteed_fast


U-Boot 2015.01-gabeeb4952b-dirty (Apr 25 2021 - 21:29:24)

DRAM:  1 GiB
Relocation Offset is: 36e78000
mmu cfg end: 0x40000000
mmu cfg end: 0x40000000
register usb cfg[0][1] = 0000000037f4f2b0
[CANVAS]canvas init
boot_device_flag : 1
Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
init bus_cycle=6, bus_timing=7, system=5.0ns
reset failed
get_chip_type and ret:fffffffe
get_chip_type and ret:fffffffe
chip detect failed and ret:fffffffe
nandphy_init failed and ret=0xfffffff1
MMC:   aml_priv->desc_buf = 0x0000000033e786b0
aml_priv->desc_buf = 0x0000000033e7a9f0
SDIO Port B: 0, SDIO Port C: 1
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 400000
emmc/sd response timeout, cmd8, cmd->cmdarg=0x1aa, status=0x1ff2800
emmc/sd response timeout, cmd55, cmd->cmdarg=0x0, status=0x1ff2800
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 40000000
[mmc_init] mmc init success
      Amlogic multi-dtb tool
      Cannot find legal dtb!
start dts,buffer=0000000033e7d240,dt_addr=0000000033e7d240
check_valid_dts: FDT_ERR_BADMAGIC
get_partition_from_dts() 92: ret -9
get_partition_from_dts() 95: ret -9
get_ptbl_from_dtb()-272: get partition table from dts faild
mmc_device_init()-1320: get partition table from dtb failed
get_ptbl_rsv()-494: magic faild MPT,
mmc_device_init()-1347: dtb&rsv are not exist, no LPT source
get partition info failed !!
Using default environment

In:    serial
Out:   serial
Err:   serial
aml log : internal sys error!
reboot_mode=normal
[store]To run cmd[emmc dtb_read 0x1000000 0x40000]
_verify_dtb_checksum()-3476: calc 0, store 0
update_dtb_info()-3584: cpy 1 is not valid
_verify_dtb_checksum()-3476: calc 0, store 0
update_dtb_info()-3584: cpy 0 is not valid
dtb_read()-3691: total valid 0
emmc - EMMC sub system

Usage:
emmc dtb_read addr size
emmc dtb_write addr size
emmc erase dtb
emmc erase key
emmc fastboot_read addr size
emmc fastboot_write addr size

      Amlogic multi-dtb tool
      Cannot find legal dtb!
[store]Err:do_store_dtb_ops,L425:Fail in fdt check header
board_late_init(): [store dtb read $dtb_mem_addr] fail
load dtb to 1000000
[store]To run cmd[emmc dtb_read 1000000 0x40000]
_verify_dtb_checksum()-3476: calc 0, store 0
update_dtb_info()-3584: cpy 1 is not valid
_verify_dtb_checksum()-3476: calc 0, store 0
update_dtb_info()-3584: cpy 0 is not valid
dtb_read()-3691: total valid 0
emmc - EMMC sub system

Usage:
emmc dtb_read addr size
emmc dtb_write addr size
emmc erase dtb
emmc erase key
emmc fastboot_read addr size
emmc fastboot_write addr size

      Amlogic multi-dtb tool
      Cannot find legal dtb!
[store]Err:do_store_dtb_ops,L425:Fail in fdt check header
board_late_init(): store dtb read 1000000 fail
vpu: error: vpu: check dts: FDT_ERR_BADMAGIC, load default parameters
vpu: error: invalid vpu
vpu: error: invalid vpu
vpp: vpp_init

eielise · 31 October 2021 01:50

The kernel couldn’t load.