19.0-Matrix Discussion

boot2k3 · 2 March 2021 10:48

The answer is 2 messages above

ozkaradag · 2 March 2021 10:51

Greetings,

I have now switched to the CE 19 Matrix version, it works stable and well, but my WiFi Remote works very fast, so it detects 2-3 times when I press it once.

I want a solution for this. What can I do?

Thanks for your help in advance…

Best regards…

giaur500 · 2 March 2021 11:02

Is there some other default webserver port now? I am unable to connect at port 8080, thus, Kore does not work.

vpeter · 2 March 2021 11:06

Did you enable it? Under Settings, Services, Control.

Portisch · 2 March 2021 11:07

Kodi http webserver is disabled by default as it’s a security issue.

Portisch · 2 March 2021 11:07

giaur500 · 2 March 2021 11:08

I updated from 18.9, it was enabled before update

Vasco · 2 March 2021 11:12

Now it’s mandatory to have a user/password @giaur500. Configure that in CE and Kore and you’re fine.

Portisch · 2 March 2021 11:13

Please search the forum!

giaur500 · 2 March 2021 11:16

Update applied, so it’s even too late. I think I have no so much things to set up, so I don’t need to backup.

ozkaradag · 2 March 2021 11:21

http://ix.io/1K8E .

Sorry and best regards…

Portisch · 2 March 2021 11:24

Wrong link?

11:17:52.823 T:18446744072853104928  NOTICE: Starting Kodi (17.4 Git:2017-08-25-6aad64f). Platform: Android ARM 32-bit
11:17:52.824 T:18446744072853104928  NOTICE: Using Debug Kodi x32 build
11:17:52.824 T:18446744072853104928  NOTICE: Kodi compiled Aug 26 2017 by GCC 4.9.0 for Android ARM 32-bit API level 21 (API level 21)
11:17:52.825 T:18446744072853104928  NOTICE: Running on Amlogic X96mini with Android 7.1.2 API level 25, kernel: Linux ARM 32-bit version 3.14.29
11:17:52.827 T:18446744072853104928  NOTICE: FFmpeg version/source: ffmpeg-3.1-kodi
11:17:52.827 T:18446744072853104928  NOTICE: Host CPU: AArch64 Processor rev 4 (aarch64), 4 cores available
11:17:52.831 T:18446744072853104928  NOTICE: Product: p281, Device: p281, Board: p281 - Manufacturer: Amlogic, Brand: Amlogic, Model: X96mini, Hardware: amlogic

ozkaradag · 2 March 2021 11:29

Greetings,

Sorry, I’ll investigate and get back to you.

Yours truly…

nd299 · 2 March 2021 11:46

I have 19 nightly, will it automatically switch to 19 stable? Or it will stay on nightly tree, and if I want stable I have to specifically download that?

giaur500 · 2 March 2021 11:48

AFAIK it will switch to stable and will stay stable

Portisch · 2 March 2021 11:49

no, you need to update by stable manually.

like by SSH:

cd .update
wget https://github.com/CoreELEC/CoreELEC/releases/download/19.0-Matrix/CoreELEC-Amlogic-ng.arm-19.0-Matrix.tar
sync
reboot

ashi · 2 March 2021 12:32

Just tested the final release on a MECOOL KII Pro (S905D) . Everything I tested worked well. Even DVB-S2 with tvheadend.

Notes:

Download the generic .img.gz, do not chose your device at dtb, it will take you to 9.2.6
Get the dtb.img from the post linked below, do not use the included one, it will result in a black screen
For DVB to work install the crazycat drivers from the “services” addons (did not try media build)

revolution6 · 2 March 2021 12:48

On my X96 Air box on startup the display is being forced into 3D mode (projector) unlike with 9.2.6 which was fine. Can this be disabled?

blahpony · 2 March 2021 13:15

I guess I know what I’m doing when I get home.

Thanks for getting this going.

RowanCE · 2 March 2021 13:45

Can I update from 9.2.6 or must I do a clean install (because its a major version release)? Might be worth adding to the announcement to avoid a flood of questions.

[I see from previous replies here that I can update. Updated my Odroid N2 with no issues!]