That problem is still present for me;
Also, there has been no Wi-Fi connection for a month now, since the start of CoreELEC.
I use the GT-King S922X 4GB
cec.
me too
First question, where did the 13.04 come from? Youāre not mixing up LibreELEC with Core are you?
I donāt see 13 anything on CE, guess I could have missed it.
All 3 of these things lead to a HDMI handshake issue, where devices were not interrogated at boot time and therefor settings are reset to default because Kodi thinks itās a new device.
More HDMI/mode issues perhaps?
What display do you have and what else do you have connected in your HDMI chain?
Are you using a quality HDMI cable?
BTW, I am seeing the same random reboots on nightlies amlogic-no on Khadas Kvim3 as well.
having random reboots here as well. on the latest no nightly. gt king pro 4gb
Coreelec is from CoreELEC nightly builds
CoreELEC-Amlogic-no.aarch64-22.0-Piers_nightly_20260413
If this is the case then I wish there was an option we could activate to ignore this behavior.
In regards of HDMI, tv box is connected directly to my 65ā Samsung RU7402, and about cable, dont know what to tell you, same setup works just fine using CE21.
1 Like
There was an EDID override in NG, donāt know how to achieve that in NO.
Directly connected is good, I would suggest spending on a higher end cable just to see how it does, maybe a Zeskit Maya if I were to recommend one.
I donāt know whatās changed regarding this between the 2 versions.
This maybe has something to do with issues I am having with HDMI sound grabbing the output away from my USB-sound card. It started happening out of the blue around a fortnight ago and the dmesg logs indicate that HDMI is causing the switch.
To be frank Kodi and CE have become a lot more unstable of late in my use case.
Could be, maybe something one of the devs can look at.
Perhaps thereās been something changed in polling frequency or power management within the codeā¦.
Hopefully itās not upstream changes, I havenāt noticed any CEC PRs lately.
I suspect its changes in Kodi rather than LE or CE.
1 Like
I previously wrote here about having some issues using Wi-Fi in CE on a Dune Pro Vision 4K. Then I bought a Wi-Fi-to-ethernet bridge, and now, instead of 12-16 MB/s, Iām getting a super-stable 47 MB/s. I havenāt encountered any buffering issues while viewing large files.
But I still have some issues. I have some drops in 05_Network.log for eth0:
RX packets:27107266 errors:0 dropped:46497 overruns:0 frame:0
TX packets:10316784 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:37692755549 (35.1 GiB) TX bytes:12473871115 (11.6 GiB)
Interrupt:40
Or is this ok?
Another problem. Sometimes, when opening a file, it simply freezes with āunix_err: ā6eā error: āConnection timed outāā in the log. Itās not common, maybe 1 file out of 20. Itās not a settings or file issue, as the same file plays perfectly after a pseudo-sleep (pkill -STOP/pkill -CONT). Also, during this bug, Kodi for some reason tries to open a bunch (but not all) of the files from the same folder and subfolders, which I didnāt even ask for, and the interface just freezes. Hereās the log. As always, Iām not sure whether this is a Kodi 22 or CoreELEC issue.
Sometimes the behavior is slightly different: the interface doesnāt freeze, the Kodi circle just spins, then simply stops trying to open the file. The log shows the same error. This happens with any file until I pseudo-sleep, after which everything works.
The issue isnāt with the router and SMB, as no other device (including Kodi 21 on Google Chromecast) has this issue. The minimum SMB version in the settings is SMBv3, as is the maximum.
Well, the two latest nightly builds (20260414 and 20260416) makes the UI (in 4k) or any 4k playback appears in the left corner of the screen, about a quarter of the screen, while the boot logo still is on the background.
Similar issue was seeing in NE few months ago.
I have a Homatics Box R 4k Plus here.
Downgrading to the 20260413 resolves the issue for me.
Turning āDisable GUI Scalingā to on is fixing the issue on my Homatics box. I have latest nightly installed.
Iām getting āNo signalā on my TV when playing 4k DV movies on the two latest releases, 20260418 and 20260416.
I downgraded to CoreELEC-Amlogic-no.aarch64-22.0-Piers_nightly_20260414.tar and now theyāre working.
āDisable GUI Scalingā works but gives some weird video glitches when starting a video.
Back to 20260413 and all is fine.
Iām sorry to hear that and I assume u also using a Homatics R 4K plus.
Iāve just done some tests with all kind of videos with all kind of resolutions, they all playing fine.
Iām using the default skin with having Kodi settings 99% as default apart from the GUI resolution and the turned on āDisable GUI scalingā
@ Iāve the latest ATV FW installed
You both realize that changing the GUI resolution doesnāt change the skinās rendered resolution.
Unless defined in the skin itās going to render the skin at 1080p, the GUI scale only stretches the GUI to 4K.
If you want to actually render at 4K you need to add that resolution to the addon.xml
Otherwise all youāre doing is making it work harder with no actual improvement in size or quality.
Running a Odroid N2+ rev 0.5 4gb
I have been getting kernel panics since 04102026 Nightly to the the current one.
Below is a log
Iām using Estuary MOD V2.
As @gjstroom says, disabling the gui scaling gives some weird glitchles when you playback and the OSD starts to loose sync and moves.
May be a patch but not a fix.
Same issue here with N2, N2+.
Logs look the same. Previous kernel does not have these panics.