Amlogic S905X2

General
189

:crazy_face:

190

sorry gentlemen’s, I’m idiot lost 2 day on this stupid problem


1 Like
191

Hey! first - Thx devs for great work! I have X96 Max 4/64 (CoreELEC-Amlogic-ng.arm-9.1-nightly_20190824-Generic.img.gz) booting ok, but something wrong with CEC - popup could not initialize cec adapter. Any ideas?

192

I have the same problem with my Magicsee n5 Max.

193

Ah I am going crazy. I had flac 24bit 96khz working on my x96 max s905x2, but suddenly no sound. I then booted into an old nightly I was sure it had been working, but no sound with spdif passthrough. Then I started up my old s812 device and flac 24 bit 96khz is working on my receiver. I start up the x96max again and be sure to use the same settings with best match, spdif passthrough, sample rate on 192khz but only 24bit 44.1khz sound or just 16 bit 44.1khz sound works.
Anybody any idea? I am on the latest nightly from 27 august. I don’t get any error, but there is no sound going to the receiver or something. And it really has been working also.

194

Try to switch to 2.0 in audio settings
Multichannel PCM is not implemented yet

195

@Fenom remove the power cable from the tv, put it back on and restart the tvbox

196

Sorry , sound like faulty optical out Omscar , also mine X96 Max have same problem

197

Thx, but same popup. (

198

My x96max 4/64 does not give sound by spdif. Same as your case

199

It’s a dtb configuration issue, unfortunately the devs have no way to test it and therefore fix it.

200

His case is that only 24bit and 16bit work, you’re saying that you have no output at all. So it’s not the same case as his.
No information about your setup means we can’t try to suggest anything to fix the issue.

201

I got this box Sawpy KM9 4x64GB LPDDR4 S905X2 Ethernet/100M
I assume it’s a Mecool KM9 Clone, I loaded nightly_20190829-Generic on a SDCard boot to CE without problem but Wifi and BT doesn’t work I used g12a_s905x2_4g.dtb and 1gbit with same results. Any advice?

202

Open it and check which wifi module inside.

203

Before opening it up, run the following command and post the url
udevadm info /sys/bus/sdio/devices/sdio* | paste

204

Connecting ethernet cable to it and ssh, this is the result:
http://ix.io/1TXq

205

Can anyone recommend me one of these S905x2 devices with wifi 5Ghz (ac) working ootb with CE?

206

This might help, dont know what hardware you have?
)H96 Max S905X2 working Coreelec

edit: saw the later post re Odroid, anyway anyone with same as in my linky may benefit.

207

UPD: I opened it and this is the wifi module:
wifi
udevadm info /sys/bus/sdio/devices/sdio* | paste
http://ix.io/1TXq

208

Fix pushed (hopefully it’ll work), please try next nightly build.