I can’t find this file:( can you show exact path?
I find this file but I can’t understand what I need to remove?
I removed all string with resolution but this is don’t help… 
how fix it?
WTF fucking update…
Everything worked well, what the fuck did I start updating?
Remove everything between <resolution> and </resolution>.
Don’t forget to stop kodi before editing file
systemctl stop kodi
Well done. All thanks guys 
Good day to everybody! I have some issues with Ugoos X2 Pro: I didn’t get USB working, even power on the ports is absent. It works normally on Android, so it’s definitely not a hardware problem. Please help me to cope with this issue.
Edit: Some observations. USB works well right after toothpick method boot, and stop working right after the first reboot. The output of fw_printenv in both cases (before and after reboot) exactly the same.
Edit2: Just in case, here are the dmesg logs for both working and non-working USB boots (could it be related to the androidboot.rpmb_state=0 ?):
dmesg_bad.log (57.4 KB) dmesg_good.log (57.8 KB)
Does anybody have some thoughts? 
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
...
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
I don’t see nothing related to usb issue from log… may be some gpios are different, but I don’t see conflicts also…
If I receive some additional info from Ugoos I will check it again.
@boot2k3, thanks for the answer! I will wait eagerly 
But do you really think that gpios mismatch can cause such behavior: toothpick boot - USB works, regular boot - USB doesn’t work?
Right now I don’t have any idea. Need to check original dtb/dts first.
If it would be helpful :
dtb_backup.img (256 KB) dtb_backup.dts (82.3 KB)
Hi,
I have some issues with my ugoos x2 pro Box.
More info is here:
The general solution for Ugoos boxes is here.
Anyone here tried the H96 Max? Or other S905x2 box that works excellent? I promised a guy a barely know to set up a coreelecbox. He don’t know how to do this, yet. He will order a box, and I will install CE on a SD card, so I am looking for a box with the least amount of hassle possible (easy startup with SD card etc). Thanks in advance.
I recommended the Odroid N2, but he does not want any DIY. He can run the SW though.
Not sure how a s905x2 is less DIY than the N2 with coreelec pre-installed? CE stable - done
CoreELEC 9.2.1 still doesn’t have the USB-OTG (USBv2) port function with Beelink GT1 Mini units. I know why, and It’s an issue that’s easily correctible by CoreELEC team by updating the dtb image. Beelink GT1 Mini & CoreELEC, No USBv2 Port
Are you asking Team CoreELEC to replace the Vendors Bootloader ?
That’s not going to happen.
Ask the vendor.
Or are you asking for a new dtb.img for this hardware ??
Yes. I meant dtb.img for this hardware. Needs to remove OTG mode for that USB-OTG (USBv2) port in order to allow that port to be used more than just a gadget.
Beelink GT1 Mini USB-OTG port which is USBv2 also dual-role device besides, to flash it via PC or hook up USB devices like mouse, keyboard, drives… The dtg is only seeing it as a single-role OTG device with the dr_mode set the way it is currently.
I have just seen this is an issue with some devices like the X2 Cube Thread
Scattered USB issue also HERE
So not so easy fix so far.
You are probably correct, @prynn. But I want to act support as little as possible here. I just want to deliver a suggestion on a box, and deliver a sd-card.
Also, there is a huge amount of delivery costs and import fees connected to the N2 where we live. That can be avoided with other boxes.
Alright, fair enough. If that’s the case I would’ve go with the Shield, if you wanna do as less support as possible.
About | FAQ | Terms of Service | Privacy Policy | Legal Notice