2 posts were merged into an existing topic: Nightly builds
My X96max 4G/64G box burns the latest CE Nightly (20190831) on a TF card.
Everything is OK（ Bluetooth is not OK ）.
And ability to wakeup with a remote .
But when I rebooted into emmc (android 9) and power off in Android.
The box can’t wakeup with a remote.
Is this normal?
Thank you for the CE team and the community.
Yes this is normal as Android doesn’t use the CE features. They are just not implemented in Android kernel.
Use reboot from Android to boot CE and then you can use power off and/or suspend.
When power off from Android you normally need to unplug power to start again.
Thank you for your reply.
Usage “inject_bl301” says “Update of BL301.bin on eMMC is not needed, exit now…” but cec wake up does not work? (Beelink GT King B922 Rev.B).
Please follow this guide:
Guide regarding debug logs or inject_bl301?
I can not continue with inject_bl301 …
Please follow the guide and post your debug ix.io link. Nobody can help without a log file.
What TV you have?
1 Like
Thanks for your support. I use LG TVs connected via HDMI/CEC (LG Simpling) to Beelink GT-King/Orbsmart S86. The logs have been uploaded via CE.
Is there any plan to develop BL301 inject feature for Amlogic S912?
It’s on plan. But there is some other testing ongoing to port Amlogic-ng to S912/S905X devices. So if this gonna happen the “Backport” to 3.14 kernel isn’t needed and the tool can easily used for this devices.
1 Like
Thanks. Please, inform us when this feature will be ready for S912 in order to try it. Thanks once again.
is this normal that the cec wake up only works with the suspend on the khadas vim3? if i set the vim3 on the power off, then i can not wake up the box using cec, i have to use the power button on the board
You maybe have a old injection on your device. Run the tool again and see if it updates.
There was a power on bug from shut down a while ago.
If you shutdown the vim3( blue led is lighting), then you can not power on it by ir remote.
I got excited for a moment but sadly I’m running S912. I hope this will be supported in the future, and by reading the comments it could be!
Thanks!
yes i have the same behavior
@Portisch
Hello, how hard it would be to port it to S905x?
I have Android repo with BL stuff if needed.
Not hard, but a lot of work! I will need to do a lot of backport.
I am not sure about the status if S912/S905X will be supported by Amlogic-ng.
This I have to check first, otherwise the backport is useless 
1 Like
Thanks! I heard we are moving towards Android kernel, if so, will it be a lot of work to support Amlogic-ng for S905X considering Android firmware already has fresh kernel for it?
@Portisch @anon88919003