Well, both files work and improve/slower key response. I kept the first/shorter one, and transferred the dongle from back 3.0 port to the front 2.0 port and the keyboard is again very usable.
Thank you very much for help.
Can you put the Firestick back in the drawer to use only in vacations?
I already did that, put it into deep sleep
unfortunatelly HDMI passthrough of AC3 is still broken on M8S II Mini. Any idea how to fix it? I’m back to 9.2.8 for the time being since it is working fine there.
I have an a95x box (s905x) that I use a 8812BU based AC wifi USB adapter as it is much faster than the onboard N wifi.
On older CE versions I had to disable the onboard wifi or neither the onboard or the USB adapter would work if they were both plugged in/active at the same time.
After installing the latest update I an unable to disable the onboard wifi using the blacklist.conf file, and neither wifi adapter works at boot if the USB adapter is plugged in.
I had previous added ‘blacklist wlan’ to my blacklist file, and it worked without issue.
I can confirm that those files are in place, and my black list appears unchanged from previous versions.
If I look at lsmod I don’t see any name changes that jump out at me.
Module Size Used by
ir_rc6_decoder 16384 0
ir_nec_decoder 16384 0
ir_lirc_codec 16384 0
lirc_dev 24576 1 ir_lirc_codec
meson_ir 16384 0
rc_core 40960 6 ir_rc6_decoder,ir_nec_decoder,ir_lirc_codec,meson_ir,lirc_dev
hci_uart 86016 1
btbcm 16384 1 hci_uart
btqca 16384 1 hci_uart
btintel 24576 1 hci_uart
bluetooth 425984 27 hci_uart,btintel,btqca,btbcm
wlan 4198400 0
88x2bu 2981888 0
mali 348160 1
joydev 24576 0
nfsd 364544 3
exportfs 16384 1 nfsd
nfs_acl 16384 1 nfsd
wireguard 139264 0
ip6_udp_tunnel 16384 1 wireguard
udp_tunnel 16384 1 wireguard
wifi_dummy 16384 0
amvdec_vp9 135168 0
amvdec_vc1 69632 0
amvdec_real 45056 0
amvdec_ports 249856 0
v4l2_common 16384 1 amvdec_ports
videobuf2_dma_contig 20480 1 amvdec_ports
videobuf2_memops 16384 1 videobuf2_dma_contig
v4l2_mem2mem 28672 1 amvdec_ports
videobuf2_v4l2 28672 2 amvdec_ports,v4l2_mem2mem
videobuf2_core 49152 3 amvdec_ports,v4l2_mem2mem,videobuf2_v4l2
amvdec_mpeg4 65536 0
amvdec_mpeg12 110592 0
amvdec_mmpeg4 40960 0
amvdec_mmpeg12 49152 0
amvdec_mmjpeg 36864 0
amvdec_mjpeg 40960 0
amvdec_mh264 172032 0
amvdec_h265 163840 0
amvdec_h264mvc 57344 0
amvdec_h264 151552 0
amvdec_mavs 61440 0
amvdec_avs 69632 0
amvdec_avs2 221184 0
stream_input 208896 12 amvdec_h265,amvdec_mavs,amvdec_mh264,amvdec_h264mvc,amvdec_ports,amvdec_real,amvdec_vp9,amvdec_h264,amvdec_avs2,amvdec_mpeg12,amvdec_avs,amvdec_mmpeg12
decoder_common 196608 18 amvdec_h265,amvdec_mavs,amvdec_mjpeg,amvdec_mh264,amvdec_mmpeg4,amvdec_h264mvc,amvdec_mmjpeg,amvdec_ports,amvdec_real,stream_input,amvdec_vp9,amvdec_h264,amvdec_avs2,amvdec_mpeg12,amvdec_avs,amvdec_vc1,amvdec_mmpeg12,amvdec_mpeg4
firmware 28672 18 amvdec_h265,amvdec_mavs,amvdec_mjpeg,amvdec_mh264,amvdec_mmpeg4,amvdec_h264mvc,amvdec_mmjpeg,decoder_common,amvdec_real,stream_input,amvdec_vp9,amvdec_h264,amvdec_avs2,amvdec_mpeg12,amvdec_avs,amvdec_vc1,amvdec_mmpeg12,amvdec_mpeg4
media_clock 45056 14 amvdec_h265,amvdec_mavs,amvdec_mh264,decoder_common,amvdec_ports,firmware,stream_input,amvdec_vp9,amvdec_h264,amvdec_avs2,amvdec_mpeg12,amvdec_avs,amvdec_vc1,amvdec_mpeg4
amlvideodri 24576 0
videobuf_res 16384 1 amlvideodri
videobuf_core 32768 2 amlvideodri,videobuf_res
videodev 290816 6 amlvideodri,v4l2_common,amvdec_ports,videobuf2_core,v4l2_mem2mem,videobuf2_v4l2
media 40960 1 videodev
fuse 131072 1
fbcon 61440 0
bitblit 16384 1 fbcon
softcursor 16384 1 bitblit
font 20480 1 fbcon
I tried upgrading to the 10/18/21 nightly, and it has the same issue.
I rolled back to 19.2 RC3 and was able to get everything working without issue again. I am guessing something changed between RC3 and the final release that impacted blacklisting the wifi somehow.
Does anyone have any ideas on how I can disable the onboard wifi adapter again without a hardware modification to the system?
your blacklist config would be needed. and also provide all debug logs
@Portisch
I provided the blacklist config in my post, but I will put it in code brackets so it is easier to find.
blacklist wlan
Here are debug logs.
http://ix.io/3C6J
please also:
ls .config/modprobe.d
and then cat
for each conf
file you get:
cat .config/modprobe.d/xxxx.conf
Hello, someone have the dtb tree of p281_gxl_4/32GB from Box D905 ???
Thank you.
ls .config/modprobe.d
blacklist.conf disable-spdif-for-hd-audio.conf
cat blacklist.conf
blacklist wlan
cat disable-spdif-for-hd-audio.conf
# INTEL HBR WORKAROUND FOR DTS-MA & Dolby TrueHD PLAYBACK
# Uncomment the following lines to disable any S/PDIF out to deliver
# bitstreamed audio on Intel builds. This is a rough workaround for
# users that have both S/PDIF and HDMI audio outputs on their motherboard
# or motherboard+discrete graphics combo.
# EVEN IF YOU ARE NOT USING THE S/PDIF OUTPUT
# but still have one, you will need to uncomment the lines below !
# after uncommenting these lines, you must reboot for these settings to take effect
# blacklist snd_hda_codec_realtek
# blacklist snd_hda_codec_sigmatel
# blacklist snd_hda_codec_cirrus
Did this information help you gleam any new ideas of what might be amiss with the blacklist between 19.2 RC3 and 19.2?
please also make a dmesg | paste
as it’s not included in the log above, thx
Try blacklist wlan-qca9377-aml
in your blacklist config.
@Portisch
That fixed it.
I guess the module name or the way it was being processed changed in the last revision.
Thanks for your help.
Hello,
With the new 19.2 matrix the screen resolution 1024x768 disappeared. It is no longer in the menu.
Is there a trick to get it back ?
Thank you.
Hello,
I have a Sunnzo S9 mini S905W.
My screen randomly goes pinkish/greenish. I have read in this forum that is is possible to add a RGB option in a file by sshing into the box. How to do that ?
Thank you.
Hi
Do you speak about this ? Color space issues - #6 by pierino2010
?
But I have brand new Sony TV and I have this issue too … I think there is nothing to do with RGB or something like …
I have sshed into my box and entered the 2 lines. I’ll tell you it this fixes the random pinkish/greenish display. My TV is 2010 Sony Bravia.
Thank you.
Edit November the 18th 2021
In Android box itself, I chose the RGB settings.
In CoreElec, I added the 2 mentionned lines in autostart.
Result : The pinkish/greenish colors have disappeared.
I have a 2020 SONY X900H and I have this issue too.
I did not tried this tweak for now because I’m not sure …
Does anyone know if this RGB issue also concerns the news TV ? like news 2020/21 Sony TV ?