Hello. I try the supplied dtb on fresh install and it works. I copied the file to device_trees on COREELEC partition and also copied to root of COREELEC as dtb.img. System boots correctly and the reboot works too.
Of course my mistake - damaged uSD card (used only for testing). Everything is fine with reboot too.
(Beelink GT King Rev A)
Thanks again and best regards.
JAM
I am having an issue with Youtube plugin running A4k clip.
Here is the link where you can see the issue.https://discourse.coreelec.org/uploads/default/original/2X/f/f4b8abec5d63e4b0c4576bb0a9074cfee2d69bd4.MOV
@anon88919003 great work test last build today x96 max+ 905x 2gb 16 no work wifi,rest all fine,test ssd is impresive faster.Me old 905x is slow jee thank
From an X96 Max+, s905x3/4g/1000m. No wifi for me.
Also no gigabit, only 100mbit ethernet. I’m getting very similar results as the s905x2 x96max users in this thread. Must be the same issue passed on to the newer box.
@creo this is RTL8822CS, yet another new wifi chip that we don’t have a driver for, which is why wifi doesn’t work.
If people keep persisting on buying the cheapest device available just to save a few $$ then you have to understand the risks that come with it.
We can only do so much to support devices.
Best option right now is to use a USB ethernet or wifi adapter.
1 Like
I leave the report of an x96 air P1 with amlogic s905x3 and for now everything works correctly. For now the tests I have done are:
Remote: OK, the x96 is compatible
Bluetooth: OK
Remote: OK
Wifi: OK, both 2.4 and 5ghz
Hardware decoding: OK, tested with 4K files with encoding h264, h265 y VP9
Live TV: OK
2 Likes
Working great on my X96 Air (P2, s905x3, 4gb, dual band WiFi, gigabit) using sm1_s905x3_4g_1gbit.dtb
I can’t verify gigabit atm but I am getting a working wired connection, also tested 2.4ghz & 5ghz WiFi and they work too. YouTube 4k works and the pixelated blocks on BBC iplayer that I got with the Khadas dtb last week have also gone.
edit I’m still getting some random pixelated blocks/ghosting on playback, not as often but it’s happening.
It also have has the frozen video after pausing like 9.2.1.
Also what’s the difference between the generic and unlabeled build both are NG?
I can also confirm that the dtb provided for gt-king rev A is working , i have flashed from scratch the latest nightly and now is working fine, it seems also that the playback capacity has increased over 9.2.1 stable.
i’ll try some of the demo posted above .
Huge thanks to everybody , will keep on using and update coreelec and report issues if needed
Hi.
Is ethernet working? At 100M or 1Gbps? Which dtb did you use?
Thanks!
Dtb can be found at post 130 from @anon88919003, and the switch seems to recognize the device as gigabit
X96 MAX plus s905x3 4g-64g-1000M -Dual Wifi.
wifi does not work
Lan :IP address is wrong.,dhcp is not able to get address, and configure ip manual doesn’t get lan.
no-LAN and no-WIFI
sm1_s905x3_4g_1gbit.dtb
CoreELEC-Amlogic-ng.arm-9.2-nightly_20191217-Generic.img.gz
Already been answered.
Ok.
and the lan network? Will it have a solution?
The the 100mb device tree, some device are marketed as gbit whilst not actually being gbit.
in android it is gigabit without problems 400/400
the tree tested 100 and the result is the disappearance of the network
summarizing :
sm1_s905x3_4g_1gbit.dtb lan network is present but does not work
sm1_s905x3_4g.dtb lan network disappears
My TV box model is a95x F3 air(905x3). After installing the version of “coreelec-amlogic-ng.arm-9.2-nightly_-generic.img”, the startup is normal, the operation is basically normal, the network card and voice are normal, and the fiber audio is normal, but WiFi is not working, Bluetooth is not working, and the WiFi core seems to be mt7668
Updated from 20191217 to 20191218 on my A95X Max.
After the upgrade process and subsequent boot there was no GUI, just the CE logo and a variety of text.
I was able to SSH into the box to run a reboot but upon issuing the command, the server connection was closed and no reboot was carried out. I was also unable to SSH back again.
I switched the box off and on again and the second boot was successful.
Looking at the log for the first boot I noticed the following lines at the end:
2019-12-19 03:12:35.391 T:4062125504 ERROR: failed to initialize EGL display (EGL_NOT_INITIALIZED)
2019-12-19 03:12:35.392 T:4062125504 FATAL: CApplication::Create: Unable to init windowing system
2019-12-19 03:12:35.392 T:4062125504 NOTICE: Stopping player
2019-12-19 03:12:35.392 T:4062125504 NOTICE: Storing total System Uptime
2019-12-19 03:12:35.392 T:4062125504 NOTICE: Saving settings
2019-12-19 03:12:35.402 T:4062125504 NOTICE: Saving skin settings
2019-12-19 03:12:35.402 T:4062125504 NOTICE: Stopping all
2019-12-19 03:12:35.408 T:4062125504 NOTICE: stop dvd detect media
2019-12-19 03:12:35.409 T:4062125504 NOTICE: Application stopped
2019-12-19 03:12:35.609 T:4062125504 NOTICE: unload skin
2019-12-19 03:12:35.610 T:4062125504 NOTICE: unload sections
But all is working fully, with TVH and live TV running again.
Ran various tests and I can’t find any issues, so all thumbs up from me.
Thanks Team.
will old SoC be affected when this goes to stable builds - S905x for example.
Or will this kernel change only be a -ng thing?