Nightly builds (NEW)

crazyturk · 11 April 2022 18:58

How to set 1080p resolution in Amazon Prime ?

Garcea · 12 April 2022 09:07

Buy a Amazon certified device, their ecosystem it’s locked. Like HboVaxx, no HD resolution possible.

Vasco · 12 April 2022 10:26

Yes, right now with the main streaming addons it’s Netflix 1080p (S922x or with S905x3 and low bitrate), Disney + 720p, Amazon and HBO max SD.

Sholander · 15 April 2022 22:33

Just updated N2 to last Nexus nightly ( 20220409) and have one question:
How do I change “Display Refresh rate” on this version?

oastra · 16 April 2022 09:47

Since one of the last updates I cannot change the refresh rate in the System/Display settings
So The refresh rate is allways in 60 HZ mode

roura97311 · 16 April 2022 11:26

Hello
I just downloaded the latest update 20220416 and I still have this display problem on Hdr movies on my Sdr Tv.
This issue appeared since Matrix 19.4 rc2
On the other hand, HDR10+ and Dolby Vision films are displayed well on my Tv Sdr.
See this post
Thanks for the work you do.
Regards

oastra · 16 April 2022 13:48

Hello
My problem is only in kodi20 nightly in kodi 19.4 everything is ok
I dont usd HDR

Blakey · 16 April 2022 17:19

Which was the last one where it was still available? What’s wrong with 60Hz?

oastra · 16 April 2022 19:37

Hello

For me 50 Hz is usefull because i use my boxes mostly to look TV and Content in 50Hz
With 60Hz my TV toggle between the refresh rates

I have only an older kodi20 nightly Image from 20220121 saved
And with this image I can change the resolution and the refresh rate like in 19.4

With the new nightly Kodi 20 update I can only change the resolution

Sholander · 17 April 2022 14:41

You can set boot resolution to 1080p50hz in “config.ini” and then it stay the same in GUI:

-# VOUT mode
-# You can use this setting to set a specific video mode at boot.

vout=‘1080p50hz’

Sholander · 17 April 2022 15:52

In latest N2 Nexus nightlies what does the number in GPU temperature stand for?

oastra · 17 April 2022 16:09

Thank you Sholander, that works

bhf · 17 April 2022 16:29

If I had to guess °F.

Sholander · 17 April 2022 18:08

That would be close (45°C) to 38°C CPU temp, but it’s also missing " °F ".
Anyway, since CPU&GPU share the same enclosure, it’s unusual that the temperature can be whole 7°C higher.

vpeter · 17 April 2022 18:19

Actually both values are the same and shows SoC temperature.
But because there is update interval the second value is probably different.

And actually there should be only one line. Will be fixed soon.

Sholander · 17 April 2022 18:58

OK, that’s what I thought; shouldn’t it then be labelled as “SoC temperature” to be more precise?
And what about missing “Display Refresh rate” value as shown on picture in post no. 2030?

Portisch · 19 April 2022 13:53

github.com/xbmc/xbmc

IsStandAlone is set to late after #21200

opened 01:25PM - 19 Apr 22 UTC

Portisch

Triage: Needed

## Bug report ### Describe the bug Here is a clear and concise description of …what the problem is: Setting is hidden because of wrong status of requirement [IsStandAlone](https://github.com/xbmc/xbmc/blob/master/system/settings/settings.xml#L2503) ## Expected Behavior Here is a clear and concise description of what was expected to happen: [IsStandAlone](https://github.com/xbmc/xbmc/blob/master/xbmc/Application.h#L271) need to be initialized before SettingsConditions get initialized. ## Actual Behavior [m_bStandalone](https://github.com/xbmc/xbmc/blob/master/xbmc/Application.cpp#L335) is set to late. ## Possible Fix ### To Reproduce Steps to reproduce the behavior: 1. Start kodi as standalone application and the `Refresh rate` setting is shown ### Debuglog The debuglog can be found here: There is no debug log possible as CLog isn't initialized yet. Debug prints by: ```c diff --git a/xbmc/Application.cpp b/xbmc/Application.cpp index bde74257ad..09d750b685 100644 --- a/xbmc/Application.cpp +++ b/xbmc/Application.cpp @@ -92,7 +92,6 @@ #include "utils/SystemInfo.h" #include "utils/TimeUtils.h" #include "utils/XTimeUtils.h" -#include "utils/log.h" #include "windowing/WinSystem.h" #include "windowing/WindowSystemFactory.h" @@ -332,6 +331,7 @@ bool CApplication::Create(const CAppParamParser &params) m_bPlatformDirectories = params.HasPlatformDirectories(); m_bTestMode = params.IsTestMode(); + MYLOG(__FILE__, __FUNCTION__, __LINE__); m_bStandalone = params.IsStandAlone(); m_windowing = params.GetWindowing(); m_logTarget = params.GetLogTarget(); diff --git a/xbmc/Application.h b/xbmc/Application.h index 1ddf3ca954..2123bf139e 100644 --- a/xbmc/Application.h +++ b/xbmc/Application.h @@ -28,6 +28,7 @@ #include "threads/Thread.h" #include "utils/GlobalsHandling.h" #include "utils/Stopwatch.h" +#include "utils/log.h" #include "windowing/OSScreenSaver.h" #include "windowing/Resolution.h" #include "windowing/XBMC_events.h" @@ -268,7 +269,7 @@ public: int GlobalIdleTime(); - bool IsStandAlone() { return m_bStandalone; } + bool IsStandAlone() { MYLOG(__FILE__, __FUNCTION__, __LINE__); return m_bStandalone; } bool IsEnableTestMode() { return m_bTestMode; } const std::string& GetLogTarget() const { return m_logTarget; } diff --git a/xbmc/utils/log.h b/xbmc/utils/log.h index 52e973e54e..58c2d24353 100644 --- a/xbmc/utils/log.h +++ b/xbmc/utils/log.h @@ -36,6 +36,11 @@ #include <spdlog/spdlog.h> +#include <iostream> +static void MYLOG (const char* _file, const char* _function, const int line){ + std::cerr << "[" << _function << "] " << line << " in " << _file << std::endl; +} + namespace spdlog { namespace sinks ``` In `log.h` prints these lines on console: ```text [Initialize] 432 in xbmc/settings/SettingConditions.cpp [IsStandAlone] 272 in xbmc/Application.h [IsStandAlone] 272 in xbmc/Application.h [IsStandAlone] 272 in xbmc/Application.h [Create] 338 in xbmc/Application.cpp [IsStandAlone] 272 in xbmc/Application.h ``` This shows clear the variable `m_bStandalone` is accessed before initialized. ### Screenshots Here are some links or screenshots to help explain the problem: ## Additional context or screenshots (if appropriate) Here is some additional context or explanation that might help: ### Your Environment Used Operating system: - [ ] Android - [ ] iOS - [ ] tvOS - [x] Linux - [ ] OSX - [ ] Windows - [ ] Windows UWP - Operating system version/name: - Kodi version: Nexus Nightly *note: Once the issue is made we require you to update it with new information or Kodi versions should that be required. Team Kodi will consider your problem report however, we will not make any promises the problem will be solved.*

Refresh rate should be back with next nightly Nexus 20220420.

loki7777 · 27 April 2022 09:57

Anyone else has a problem with audio after stop/pause not the out of sync problem but it sounds like robots talking? Stop is not helping only reboot.

I hope that log is ok - started after second pause of futurama then stop and play other files but still same error.

Portisch · 27 April 2022 12:38

There is something wrong:

2022-04-27 11:53:44.430 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/pcm/pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround51
2022-04-27 11:53:44.430 T:3725     INFO <general>: CAESinkALSA - Unable to open device "surround51" for playback
2022-04-27 11:53:44.431 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/pcm/pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround40
2022-04-27 11:53:44.431 T:3725     INFO <general>: CAESinkALSA - Unable to open device "surround40" for playback
2022-04-27 11:53:44.431 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/pcm/pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround51
2022-04-27 11:53:44.431 T:3725     INFO <general>: CAESinkALSA - Unable to open device "surround51" for playback
2022-04-27 11:53:44.440 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/confmisc.c:767:(parse_card) cannot find card '$CARD'
2022-04-27 11:53:44.440 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:4745:(_snd_config_evaluate) function snd_func_card_driver returned error: No such device
2022-04-27 11:53:44.440 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/confmisc.c:392:(snd_func_concat) error evaluating strings
2022-04-27 11:53:44.440 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:4745:(_snd_config_evaluate) function snd_func_concat returned error: No such device
2022-04-27 11:53:44.440 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/confmisc.c:1246:(snd_func_refer) error evaluating name
2022-04-27 11:53:44.440 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:4745:(_snd_config_evaluate) function snd_func_refer returned error: No such device
2022-04-27 11:53:44.440 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:5233:(snd_config_expand) Evaluate error: No such device
2022-04-27 11:53:44.444 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:5084:(parse_args) Unknown parameter CARD
2022-04-27 11:53:44.444 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:5217:(snd_config_expand) Parse arguments error: No such file or directory
2022-04-27 11:53:44.444 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:5084:(parse_args) Unknown parameter CARD
2022-04-27 11:53:44.444 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:5217:(snd_config_expand) Parse arguments error: No such file or directory
2022-04-27 11:53:44.444 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:5084:(parse_args) Unknown parameter CARD
2022-04-27 11:53:44.444 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:5217:(snd_config_expand) Parse arguments error: No such file or directory
2022-04-27 11:53:44.444 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:5084:(parse_args) Unknown parameter CARD
2022-04-27 11:53:44.444 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:5217:(snd_config_expand) Parse arguments error: No such file or directory
2022-04-27 11:53:44.444 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:5084:(parse_args) Unknown parameter CARD
2022-04-27 11:53:44.444 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:5217:(snd_config_expand) Parse arguments error: No such file or directory
2022-04-27 11:53:44.444 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:5084:(parse_args) Unknown parameter CARD
2022-04-27 11:53:44.444 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:5217:(snd_config_expand) Parse arguments error: No such file or directory
2022-04-27 11:53:44.444 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:5084:(parse_args) Unknown parameter CARD
2022-04-27 11:53:44.444 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:5217:(snd_config_expand) Parse arguments error: No such file or directory
2022-04-27 11:53:44.444 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:5084:(parse_args) Unknown parameter CARD
2022-04-27 11:53:44.444 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:5217:(snd_config_expand) Parse arguments error: No such file or directory
2022-04-27 11:53:44.444 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:5200:(snd_config_expand) Unknown parameters CARD=AMLAUGESOUND,DEV=0
2022-04-27 11:53:44.444 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:5200:(snd_config_expand) Unknown parameters CARD=AMLAUGESOUND
2022-04-27 11:53:44.444 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:5200:(snd_config_expand) Unknown parameters CARD=AMLAUGESOUND,DEV=0
2022-04-27 11:53:44.444 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:5200:(snd_config_expand) Unknown parameters CARD=AMLAUGESOUND
2022-04-27 11:53:44.444 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:5084:(parse_args) Unknown parameter DEV
2022-04-27 11:53:44.445 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:5217:(snd_config_expand) Parse arguments error: No such file or directory
2022-04-27 11:53:44.445 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:5084:(parse_args) Unknown parameter DEV
2022-04-27 11:53:44.445 T:3725     INFO <general>: CAESinkALSA - ALSA: /var/corebuild/CoreELEC-19/build.CoreELEC-Amlogic-ng.arm-19/build/alsa-lib-1.2.4/src/conf.c:5217

Can you try with a clean install. Just use another uSD or USB device and make a clean install with the last nightly available.

loki7777 · 27 April 2022 13:17

Just trying with latest nightly clean but will use my old kodi settings.
Will let you know in few hours.