I’m getting the same error. My device GT King Pro.
sdr to hdr works on vim3/lg oled -> many thanks for the support
1 Like
HI. I first tried the nightly dated 14th February. Then the 15th Auto updated. The hit rate for scraping is now down to 20%, and I have tried many manual variations without success for the other 80%.
In the end i gave up and reinstalled the 14th Feb with the lan cable removed. I then changed Auto update to manual, plugged in the lan cable, and rejected the 15th when offered.
I thought Manual was the default for nightlies?
Please paste a link to your kodi.log before reverting so we can look at it further.
Will do…
How do you that? Any logs appear to be in the ext4 which i cannot see when i plug the SD card back in my PC.
With the last nightly, when pausing and restarting, my N2 restarts. This problem continues …
I’m glad to hear that that worked for you.
If it becomes a problem again in the future let me know. I can’t routinely test the current status of HDR related features, since I unfortunately don’t have a TV that supports HDR, so I’m dependent on feedback from people that do to keep me updated about such issues.
1 Like
Just tested nightly on my device and still working as before. Also update Android to latest version and CoreELEC still works.
So it must be something on your side.
will be done - thanks for your support
A 169.254 . x.x usually means that you are getting a physical Link, but cannot get an IP address from your router.
Ethernet or WiFi?
Are you using DHCP?
Do you have any VPN or firewall setup on the device or router?
Can you try to manually configure an IP address?
[You will need to know what IP range your router is setup to use, and the IP address of the router to do this. Also need to make sure that you pick an IP address that is not currently being used by another device on the network.]
I’m on 9.2.1 stable on an S905 box (Kii pro). Should I flash the latest nightly? Will I gain anything?
Give it a try but I say stay on official.
9.2.1 stable works correctly.
1 Like
Hi. Using the 19th Feb on 905x3. I have a lot of of interlaced videos from my old UK camcorder. Being the UK, they have the reversed field order to the USA. They look aweful. The wrong field order was not a problem I expected in 2020!
VLC for android does not have the problem. They have been around long enough to check for it.
You able to upload a sample of one of them?
I think WOL its break.
Can someone test?
Broken for me too as you know. Hopefully it’s not our box and can be fixed in the future.
i’ve just setup the nightly build as i have an x96 air, s905x3, all booted fine after realised didn’t have the support in release, but once booted, i cannot use my remote, is this something to do with CE or is it a fault that doesn’t show in android with the remote?
Did you search the forum? Not sure if this works.