If the seller has sold you fake goods, the threat of dealing with fraud charges probably outweighs the cost of dealing with a voided warranty. There’s also the question of whether a warranty is valid if the product sold is what was purchased.
Do you think it is possible to improve the speed of audio track change?
So it seems it is a real 4gb version. Ive opened it, here the specs:
- WiFi chip: AP6356S
- Chip eMMC Flash: Samsung klmbg4geac 628 32GB
- Spectek PS082-062BT RAM Chip on 4GB DDR4LP Type
Here are some pics in spoiler:
So why the hell does CE only works with 2g dtb on my device?
Whilst that question gets answered get on and use it. You will never use more than approximately 1g of RAM when running CE, so I guarantee that you will see no difference.
However the real issue here is that the plethora of cheap Android boxes makes comprehensive support impossible, not helped by the fact that each board can have multiple versions in circulation.
The only recommended hardware for CE is one of the SBC’s.
Thanks to a user’s contribution, we now have LPCM support in the 4.9 kernel (Amlogic-ng).
Everything has been pushed, and should be available in the next nightly build. (20190929)
We were able to test it on Odroid N2 and Beelink GT-King. We have not tested it on S905X2 devices, but it should work. Please report any issues with this new feature.
- Disable the
Enable Dolby Digital (AC3) transcodingoption under
- Select the
HDMI Multi Ch PCMoption in
Audio output device
- Select the number of channels
- Leave other passthrough settings as they are, the passthrough device should remain
If some of you are not sure about which audio settings to use, take a look at Kodi’s Audio quick-start guide Especially for those of you with an AVR should select number of channels to 7.1 (regardless of your sound setup - example 5.1)
LPCM samples can be found at Kodi’s Samples
Example of Mediainfo with LPCM (VC1-1080p23.976-LPCM7.1)
ID : 2
Format : PCM
Format settings : Little / Signed
Codec ID : A_PCM/INT/LIT
Duration : 59s 781ms
Bit rate mode : Constant
Bit rate : 6 144 Kbps
Channel(s) : 8 channels
Sampling rate : 48.0 KHz
Frame rate : 32.000 fps (1500 SPF)
Bit depth : 16 bits
Delay relative to video : 11ms
Stream size : 43.8 MiB (15%)
Language : English
Default : Yes
Forced : No
Excellent thank you!
Hi ci6n0z, i never noticed before that it is recommended to use 7.1 with AVR, even if the AVR only has 5.1 speakers.l, so i always used 5.1.
Do you know why its better to use 7.1 even if there are inly 5.1 speakers?
Use the maximum number of channels (7.1) then the AVR will convert it to 5.1 so it will always be of good quality. Let the AVR do its job, it will do better.
even with lower channel setup? I think the sonos beam is a 3.0 system only.
Do you use HDMI ARC? Set “Number of channels” to 2.0.
Yes, the device have HDMI ARC.
Updated the last night. Work on a mkv archives, but without sound in a VOD platforms (Netflix and HBO).
Am I the only one who happens to or happens to any of you?
Latest Nightly: 7.1 Lpcm working fine, in my Beelink GT-King.
Atmos and DTS-X working as before in my mkv’s
Netflix : Atmos , True-HD working as before.
All working fine.
True HD on Netflix? You mean DD+.
There is Atmos / true HD movies.
Netflix doesn’t do TrueHD, as far as I know, but you can get Atmos over DD+.
Yep DD+ /Atmos.
I’m a bit perplexed. On the LePotato multichannel has been working fine (aac, flac and pcm 5.1 and 7.1). With this latest nightly it is still working just fine . . . Was it not supposed to work before?