When it just stopped working and a fresh install does not fix it it looks like it got turned off on the TV. Does CEC with the C2 still have CEC on the same HDMI port?
You need to enable libCEC component logging in Kodi and share this kodi.log later.
You need also debug logging enabled. Do me a favor and disconnect the C2 and all other hdmi devices. Only connect the N2 directly turn on the TV and reboot the N2.
Apologies, have reverted back to 4.0.4 and hopefully enabled libCEC logging. What is interesting is that turning TV off/om now turns kodi on/off, however the remote of the TV still does not control kodi like it did a week back. The N2+ is connected directly to the TV, there is a Sonos Beam connected via ARC, if any of that makes a difference.
“When TV is turned off” Is the Setting you need. Now it’s “Suspend”. You can turn this off if you don’t want it. If you don’t want your N2 to turn on if you turn on the TV you need to go into CE Settings->Hardware->CEC Wake and disable it.
Are you sure you haven’t changed something about your setup?
It’s just weird that it worked for one week with 9.2.4.1 then suddenly stopped and is not working at all.
9.2.4.1 had a bug that could slow down the GUI and make libcec crash.
And if you unplug your soundbar from hdmi and only have one hdmi to the N2 connected. Also doesn’t work?
Nothing has physically changed at in the setup, I think Sonos may have had a firmware update but thats it. I am almost certain I had the CEC set so the unit does not switch off with the TV (it had not done so for the first week), then one morning it was switched off, waking the TV did not wake it either. After restarting it manually the remote did not work, and has not worked since. When I unplug and plug the hdmi from the N2 back in the TV says that the magic remote is ready to be used with the hardware but nothing happens. I am completely baffled as my C2 worked flawlessly for years and still does.
Have also tested this, it did not fix the issue unfortunately.
Question-I’ve been toying around with the idea of getting an N2+ to replace my N2. All I use it for is playing local video files off an external hdd (no nas). Since Coreelec doesn’t require very much horse power to run I doubt that I’d see any improvement in performance. What do you guys think?
Hi, sadly the problem returned with another file. Tried to do a hard reset, but no help. The file takes 5 minutes to start when resuming from a previous position, and after 2 minutes of playback it stops.