thanks for your opinions everyone
I use GT-King B922 CoreELEC-Amlogic-ng.arm-9.2-nightly_20191001-Generic.img.gz) . How Mute HDMI audio output (when using SPDIF)?
Same issue here, but with the latest stable version (CoreELEC-Amlogic-ng.arm-9.2.0-Generic.img).
I have already tried going through the settings in Expert mode, as well as issuing via SSH:
echo "audio_off" > /sys/class/amhdmitx/amhdmitx0/config
but didn’t have any luck.
My box needs the rev. a dtb and was upgraded to the latest stock firmware (905P0) before installing CoreELEC, should that make a difference.
I would also like to take this opportunity to thank the developers that did such an amazing work bringing CoreELEC to this box, despite all the initial tribulations.
It’s seems that Ethernet only works with speed of 100M in the latest version 9.2.0 or nightly 10.7?
Did you update your Android to 905P0 version?
Is the CE related to Android firmware? Should I update Android firmware to 905P0 to solve the Ethernet issue under CE?
Yep, ethernet issue is related with Android.
After updating it should work on gbit in CE
thanks, ethernet works on gbit now, but network reconnecting happens sometimes.
Hey guys,
I have a problem with HDR10+ movies on my Beelink GT King… they are played in SDR, the colors are completely washed, there is no contrast… looks terrible.
Is this a known issue?
Update to latest nightly
Okay I’m sorry, thanks for your help!
Do you have an approximative date for a fix in a stable version?
No, there is no ETA for next stable. Never was, never will.
Ok thank you.
I have an other (sound) issue with my DTS movies… no problem for Dolby Digital but a big with DTS, the sound “cracks”… it’s unplayable. Despite the logo “DTS” appears on the display of my AVR so the pass through works it seems but the decoding not. I think my settings are good : 2.0 channels, HDMI decode / pass-through, DTS capable receiver enabled… (I use my AVR for audio only via HDMI ARC).
I find a “fix” by enabling AC3 transcoding, it’s good with the logo “DD” on my AVR, but it doesn’t sounds like an optimal solution as it’s not DTS.
OK I have updated to the last Nightly and it seems it has resolved both my HDR 10+ and audio issues!
My HDR10+ movies are played in HDR 10 and I don’t know why but the DTS works, with the same settings…
Only one problem : I can’t access to the movie database to download informations. I have a message “unable to connect to remote server”.
My connection is the same, never has changed (Ethernet)… a clue?
EDIT : “could not connect to repository” message too
I reboot to android and internet is working well…
I bet that this is the fix for broken gigabit ethernet Beelink delivered into new Android firmware:
https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=180745
I highly doubt it.
the gbit ethernet is very unstable even the box has updated to lastest android firmware.
A new Firmware is out: 906P0
Repair:
- Optimize the system
- Join Miracast (Android phone can cast screen to the box)
- The version number is 906P0
- Add sd card brush function
Note：905P0_20191010 can be upgraded to906P0 OTA
I’ve just updated to 906P0 flawlessly (from Android, using OTA).
Since then, CoreELEC displays only green stuff on my TV, as if the color subspace was wrong. This happens at the very first steps of the boot process.
It does not happen with Android though. Any idea how to fix this ?
dispinfo output: http://ix.io/1ZXK
I did add this to the autostart.sh script a few months back as I had some issue with RGB display:
“echo rgb,8bit > /sys/class/amhdmitx/amhdmitx0/attr”
I tried to remove it an relaunch, but the screen issue remains.
Try to update to nightly build