[S922X] Bee-link GT King

Help & Support Hardware
903

Hi
I have a Beelink GT-King Pro

When I use Android, the system is quite stable, but when I use CoreELEC, when I watch movies, sometimes after I stop playing the movie, the image turns black and I have to Disconnect the HDMI cable from the device and reconnect it to return the image to normal.

  1. This is not a permanent problem, but it does occur in significant numbers.

  2. This problem occurs in 95% of cases when the movie stops playing.

904

Hello everyone!

My Beelink GT King with the latest Coreelec is connected through the wire to Gigabit network (1000/500), but Speed Test addon (Ookla) cannot count more than 300/150mbits.

Laptop with the same wire and same router port achieve 950/600.

Is this “speed test” addon reliable? Maybe I could try something else?

905

If you really have to know the numbers use iperf program from network-tools addon and measure speed between computer and your device.

906

More on iperf.

907

But I don’t need speed info between computer and Beelink, but between Beelink and WAN

908

That is what iperf will perform, an accurate test of your internet capabilities but you have to ssh into your box from a windows pc to achieve this.

909

Thanks, I will try.

910

After a 19.4 clean install, 4K video locks up the entire system.
I had to go back to 19.1 and interrupt future updates
Do you have any solution, please?

My sistem is Beelink GTKing 4Gb

911

Again and again…
https://wiki.coreelec.org/coreelec:ce_support

912

Sorry. My fault.
I stopped watching old assistance requests and did not view your reply.
I will look for the solution in this link.
For now the only version I am happy with is 19.1
Thank you.

913

Word of advise: should anyone have these SPDIF/Optical Out issues in the future (see quoted post), the solution is to update Beelink’s firmware.

1 Like
914

Hi Gurus,

Does core elec work on Beelink GT-King Pro ?

Eero

915

Yes, just download the latest release and use dtb g12b_s922x_beelink_gt_king (It does not have pro in its name, but it’s a multi-dtb that contains the dtb for both non-pro and -pro model)

916

Actually it contains dtb for s922x SoC revision A and B.

917

@7Ji thanks.

Eero

918

For future reference.

919

A post was merged into an existing topic: Combined Audio Output availiable by default

920

Can someone advise me how I could control the led diodes (skull eyes). Ideally using a python script (Kodi addon).

921

I am having issues with ceemmc on a Beelink GT-King WiFi6 Model.

here is the command line output:

i was able to get it installed by doing a dual boot install first, then changing to single boot

##############################################
#                  CoreELEC                  #
#            https://coreelec.org            #
##############################################

CoreELEC (official): 19.5-Matrix_rc2 (Amlogic-ng.arm)
CoreELEC:~ # ceemmc

Starting CoreELEC eMMC installation tool...

eMMC size: 0x000e67800000 [64GB]

No CoreELEC installation found on eMMC

Install in dual boot mode, CoreELEC and Android on eMMC
 Use CoreELEC data from
   [1] current used SD or USB device
   [2] existing backup on current used SD or USB device

Install in single boot mode, only CoreELEC on eMMC
 Use CoreELEC data from
   [3] current used SD or USB device
   [4] existing backup on current used SD or USB device

Please choose one option? [1/2/3/4]: 3

Free space of 'partition CE_FLASH': 512MB
Warning: Could not find 'dto' partition!
Free space of 'partition CE_STORAGE': 58388MB

Used space of '/flash': 235MB
Used space of '/storage': 4MB

There is enough free space on eMMC for installation!

Install CoreELEC on eMMC.
Continue? [y]: y

Moved 'env' from offset 0x00004d400000, size 0x000000800000 to offset 0x000000400000
Moved 'misc' from offset 0x000051400000, size 0x000000800000 to offset 0x000000c00000
Moved 'logo' from offset 0x00004e400000, size 0x000000800000 to offset 0x000001400000
Moved 'dtbo' from offset 0x000052400000, size 0x000000800000 to offset 0x000001c00000

Starting to format the new 'CE_STORAGE' partition...
mke2fs 1.45.7 (28-Jan-2021)
Discarding device blocks: done                            
Creating filesystem with 14947328 4k blocks and 3743744 inodes
Filesystem UUID: de0e496a-eea1-401a-ba3d-11255258bd9c
Superblock backups stored on blocks: 
	32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 
	4096000, 7962624, 11239424

Allocating group tables: done                            
Writing inode tables: done                            
Creating journal (65536 blocks): done
Writing superblocks and filesystem accounting information: done   

Error opening file for writing '/dev/reserved'!
Failed to write the new partition table to eMMC!

** Update ** Solution is Here: https://discourse.coreelec.org/t/ceemmc-on-beelink-gt-king-fails/19029/5?u=spl147

922

anyone have an idea?