Tell me what is wrong here:
Your sample have mb height/widht/total: 2d/50/e10 level_idc 28 max_ref_num 3.
This is level 40 as itās 0x28:
So size = 12582912:
12582912 / (0x2d * 0x50 * 384) = 9
Maybe you just share a short sample?
No sample, no idea!
H96 X905x2 4gb
Any one got it working in NO?
I just get a black screen with intermittent spinning circle.
I have tried a few builds with no luck.
With the new kernel 5.15.153 my remote controls do not work.
2.4 air mouse also tested with remote control
Device:Ugoos SK1 and AM8
Also, GT King II wonāt open with the new kernel.
I did some DV, UHD, ISO and HLG video tests with SK1 and they all worked.
CoreELEC:~ # ls /dev
amaudio mapper tty38
amaudio_ctl measure_summary tty39
amaudio_utils media tty4
amdolby_vision media.amports tty40
amhdmitx0 media.audio tty41
aml_crypto media.codec_mm tty42
amremote media.decoder tty43
amresource_mgr media.dmabuf_manage tty44
amstream_abuf media.parser tty45
amstream_dves_av1 media.tsync tty46
amstream_dves_avc media.vfm tty47
amstream_dves_avc_frame media.video tty48
amstream_dves_hevc mem tty49
amstream_dves_hevc_frame metadata tty5
amstream_hevc misc tty50
amstream_hevc_frame mmcblk0 tty51
amstream_hevc_sched mmcblk0boot0 tty52
amstream_mpts mmcblk0boot1 tty53
amstream_mpts_sched mmcblk0rpmb tty54
amstream_sub mqueue tty55
amstream_sub_read net tty56
amstream_userdata null tty57
amstream_vbuf odm_ext_a tty58
amstream_vbuf_sched odm_ext_b tty59
amstream_vframe param tty6
amsubtitle picdec tty60
amvecm pmsg0 tty61
amvideo ppmgr tty62
amvideo_poll ppp tty63
amvideocap0 ptmx tty7
aocec pts tty8
ashmem ptsserver tty9
audio_data_debug ram0 ttyS0
audio_utils ram1 ttyS1
autofs ram10 uhid
block ram11 uinput
boot_a ram12 uio0
boot_b ram13 unifykeys
bootloader_a ram14 urandom
bootloader_b ram15 userdata
bsg ram2 uvm
btrfs-control ram3 v4l
bus ram4 v4lvideo
char ram5 vad
console ram6 vbmeta_a
core ram7 vbmeta_b
cpu_dma_latency ram8 vbmeta_system_a
cri_data ram9 vbmeta_system_b
di0 random vcs
di_process.0 reserved vcs1
di_process.1 rfkill vcs2
disk rsv vcs3
display rtc vcs4
dma_heap rtc0 vcs5
dmaheap sda vcs6
dri sdb vcsa
dtb sdb1 vcsa1
dtbo_a sdb2 vcsa2
dtbo_b secmem vcsa3
dvb sg0 vcsa4
efuse sg1 vcsa5
env shm vcsa6
esm snd vcsu
esm_rx stderr vcsu1
factory stdin vcsu2
fb0 stdout vcsu3
fd super vcsu4
firmware_vdec tee vcsu5
frp tee0 vcsu6
fsck.log tee_comm_hdcp vdin1
full teepriv0 vendor_boot_a
fuse tsync vendor_boot_b
ge2d tty vfm
gpiochip0 tty0 vga_arbiter
gpiochip1 tty1 vhci
hwrng tty10 vicp
i2c-1 tty11 video10
i2c-2 tty12 video11
i2c-6 tty13 video12
init_boot_a tty14 video13
init_boot_b tty15 video14
input tty16 video15
ion tty17 video16
ionvideo tty18 video17
kmsg tty19 video18
log tty2 video19
logo tty20 video20
loop-control tty21 video21
loop0 tty22 video23
loop1 tty23 video30
loop10 tty24 video31
loop11 tty25 video32
loop12 tty26 video33
loop13 tty27 video34
loop14 tty28 video35
loop15 tty29 video36
loop2 tty3 video37
loop3 tty30 video38
loop4 tty31 video71
loop5 tty32 video_composer.0
loop6 tty33 video_composer.1
loop7 tty34 videosync
loop8 tty35 wifi_mac
loop9 tty36 wifi_power
mali0 tty37 zero
CoreELEC:~ #
Good day to allā¦
I ordered the infamous Ugoos AM6B+ and ran the player succesfully with CE-NG for a few weeks, using the internal eemc with HS400 speed. Very nice.
Now experimenting with CE-NO and again everything is going well for what I am currently using, again with use of the emmc. Also using the correct dovi.ko.
The latest nightly generic CE-NO image is installed.
The only thing I have a question about, is the absence of the EMMC speed setting. Is it not available yet in CE-NO? I have searched the forum left to right but couldnāt find an answerā¦
Thank you in advance.
Br, K.
Remote controls worked with bluetooth on AM8 but not with IR mode.
Remote controls did not work with both modes on SK1
UART-log is required
IR-remote remote.conf will work again with next nightly.
GT King II do just boot fine here with last 5.15.153 nightly.
My device is Ugoos Am8. after the last update dolby vision video is not working
log:https://paste.coreelec.org/StumpUrkel
GT King II booted with the dtb file from the day before.
Last version is 20250304, please update and try again!
For Dolby Vision also kodi debug log is required!
I did write already it boot fine!
What should I do? Trust or not?
Make UART log or any other dmesg.
No log, no error.
I changed āt7_a311d2_beelink_gt_king_ii.dtbā and now it works.
Thanks
Mr. Portisch. I updated again, the result is the same.
kodi.log (84.7 KB)
2025-03-04 11:59:42.144 T:1268 info <general>: CAMLCodec::OpenDecoder DOVI: version 1.0, profile 5
2025-03-04 11:59:42.144 T:1268 info <general>: CAMLCodec::OpenDecoder Amlogic device does support DV, DV is disabled by user, display does not support DV, DV system is disabled
How you want to watch DV when your display does not support it?
Got some research on what to do 